Nortel BCM1000 Manual de usuario

BCM

Business Communications Manager

Document Status: Standard

Document Version: 03.02

Document Number: NN40010-301

Part Code: N0158289

Date: July 2007

Keycode Installation Guide

The information in this document is subject to change without notice. The statements, configurations, technical data, and

recommendations in this document are believed to be accurate and reliable, but are presented without express or implied

warranty. Users must take full responsibility for their applications of any products specified in this document. The

information in this document is proprietary to Nortel Networks.

Trademarks

Nortel, the Nortel logo, and the Globemark are trademarks of Nortel Networks.

All other trademarks and registered trademarks are the property of their respective owners.

Keycode Installation Guide

Chapter 1

Obtaining a keycode

This guide tells an installer how to obtain and enable software keycodes.

You require a keycode to enable software features on the Business Communications Manager

(BCM) system. The keycode is a 24-digit code that authenticates the feature or bundle of features

you purchased for your BCM.

To obtain a keycode you require the following:

• feature authorization code for the BCM

•systemID

The authorization code is a six-digit code you receive for each of the features you purchase.

The authorization code is on the label affixed to the keycode information sheet.

The system ID is a unique number for your BCM. You can find the system ID:

• on the product packaging label

• in Element Manager

• using the telset-based administration interface

In the BCM Element Manager, the sequence number indicates how many times the keycode has

been modified. Each time the keycode is modified, the sequence number increases by 1. The key

type identifies the method of authentication for the keycode. For BCM, only type 2 keys are

supported.

Adding a keycode to your system involves:

1“Determining the BCM system ID” on page 4

2“Obtaining Web keycodes” on page 5

3“Entering keycodes on the BCM system” on page 9

Note: You receive one keycode whether you purchase one feature or a bundle of

features, but you receive an authorization code for each feature you purchase. For

example, if you have one feature, you receive one authorization code and one

keycode. If you purchase four features, you receive four authorization codes and

one keycode.

Note: For BCM 3.x releases, the BCM200, BCM400, and BCM1000 hardware

required a separate keycode for each feature and an authorization code for each

feature. For BCM 4.0, however, the BCM200, BCM400, and BCM1000 hardware

requires only one keycode for one feature or a bundle of features, but one

authorization code for each feature you purchase. BCM50 requires only one

keycode for one feature or a bundle of features, and one authorization code for

each feature you purchase.

4Chapter 1 Obtaining a keycode

NN40010-301NN40010-301

Determining the BCM system ID

Before you can obtain a software keycode, you must determine the system ID for your BCM

system. When you add a keycode, you must make sure the keycode file name matches the system

ID for which it is generated.

You can find the system ID in Element Manager and on the product packaging (see Figure 1).

Figure 1 Product label sample

To use Element Manager to find your system ID

1Log on to Element Manager and select the BCM system for which you want to find the system

identification number.

For information about how to log on to Element Manager, refer to your administration guide.

2On the Task Navigation Panel, select the Configuration tab.

The configuration folders appear.

3Select the System folder.

4Click Keycodes.

The system ID appears in the System ID field.

5Record the system ID.

Chapter 1 Obtaining a keycode 5

Keycode Installation Guide

Obtaining Web keycodes

To obtain your keycode file, access the Nortel Keycode Retrieval System Web page using your

Web browser or Element Manager.

You must be a registered user to access this system. To register, access the Nortel Keycode

Retrieval System Web page at: http://www.nortel.com/servsup/krs.

To obtain a keycode using a Web browser

1Access the Nortel Keycode Retrieval System at:

http://www.nortel.com/servsup/krs

2Select the login location that applies to you.

This is the location you want to use to access the Keycode Retrieval System.

3Select the product family option that applies to you.

For the BCM system, select Business Communications Manager or Business Communications

Manager 50.

4Enter your username and password.

Use the username and password from the KRS registration process.

5Click OK.

6Select the Keycode Retrieval System option that applies to you.

7Enter the system ID in the Enter System ID field.

For example: 000A0AA0A00

See “Determining the BCM system ID” on page 4.

8Click Continue.

9Enter the authorization code for the feature in the Auth Code field.

10 Click Add.

The system validates the authorization code and adds the feature to the feature list.

11 Repeat steps 7 and 8 until all of the authorization codes are added.

You can enter up to 100 authorization codes before you generate the keycode.

Note: To obtain your keycode file, you must have your system ID, your

authorization codes, and your user name and password from the Nortel Keycode

Retrieval System.

Note: Ensure the customer registration information is entered for this system.

Select Customer Registration in the main menu options to verify the customer

registration information is entered. Without proper customer registration, an error

appears when requesting keycode generation.

6Chapter 1 Obtaining a keycode

NN40010-301NN40010-301

12 After you have added all the authorization codes, click Continue.

A Web page appears with your system ID, the list of authorization codes, and a table of the

features.

At this point, if the customer registration information has not previously been entered for this

system, the Keycode Retrieval System displays an error and asks you to enter the information

by selecting Customer Registration in the main menu options.

13 Verify that the system ID, authorization codes, and feature list are correct.

aIf yes, click Generate Keycode.

bIf no, click Cancel to re-enter the authorization codes.

14 Click Generate to retrieve the keycode file.

The keycode file contains the 24-digit keycode, sequence number, and list of features and data

values.

15 Do one of the following:

• Download the keycode file to your computer. Click Download Keycode.

You can use this file to copy the keycode into your BCM system. Loading this keycode

file into your BCM is the fastest and easiest installation method. The default name of the

keycode file contains the system ID within the file name to help you keep track of the files

that belong to each system.

• Record the keycode. To do this, write down the information, print the file, or copy and

paste the information into another document.

To obtain a keycode using Element Manager

1Log on to Element Manager and select the BCM system you want to access.

For information about how to log on to Element Manager, refer to your administration guide.

2On the Task Navigation Panel, select the Configuration tab.

The configuration folders appear.

3Select the System folder and then select Keycodes.

The Keycodes panel appears.

4Click the Connect to Nortel Keycode Retrieval System button.

The Nortel Keycode Retrieval System (KRS) Web page launches.

Note: Nortel recommends that you download the keycode file to your computer.

If you download the keycode file rather than enter it manually, you will reduce the

chance of error.

Warning: Do not alter the name or the contents of the generated keycode file. If

you change the file, the keycode becomes invalid and the BCM rejects the file.

Chapter 1 Obtaining a keycode 7

Keycode Installation Guide

5Go to step 2 in the procedure “To obtain a keycode using a Web browser” on page 5.

8Chapter 1 Obtaining a keycode

NN40010-301NN40010-301

Try ’N Buy keycode

You can use the Try ’N Buy keycode to sample features on the BCM. You can evaluate the

Try ’N Buy features for 60 days from the date the keycode is generated.

The Try ’N Buy feature is not available when the expiry date is reached. You cannot extend the

expiry date or obtain another Try ’N Buy keycode for the feature on that BCM system. If you want

to continue using the feature, you must purchase the appropriate keycode and install it.

The new keycode file for the Try ’N Buy feature allows you to try all of the features installed on

the BCM. For example, if you have Unified Messaging installed on your BCM and you decide to

add a Try ’N Buy feature, the new keycode files include Unified Messaging and the Try ’N Buy

feature.

To obtain a Try ’N Buy keycode

1Access the Nortel KRS at:

http://www.nortel.com/servsup/krs

2Select the login location that applies to you.

This is the location from which you want to access the KRS.

3Select the product family option that applies to you.

For the BCM system, select Business Communications Manager or Business Communications

Manager 50.

4Enter your username and password.

Use the username and password from the KRS registration process.

5Click OK.

6In the Product Control section, click the Gen Try ’N Buy keycode link.

The Generate Try ’N Buy keycode Web page opens.

7Follow the instructions on the Generate Try ’N Buy Web page to generate the keycode.

Note: You are not required to order any products from Nortel to obtain a Try ’N

Buy keycode. You do not require an authorization code, but you must have the

BCM system ID.

Note: On the Generate Try ’N Buy keycode page, enter the system ID, For

example: 0000A0AA0A00.

Chapter 2 Entering keycodes on the BCM system 9

Keycode Installation Guide

Chapter 2

Entering keycodes on the BCM system

There are five ways to enter keycodes:

•“Loading a keycode using Element Manager” on page 9

•“Manually adding a keycode using Element Manager” on page 10

•“Adding a keycode using the telset administration interface” on page 11

•“Loading a keycode using the Startup Profile” on page 13

•“Loading a keycode using Network Configuration Manager” on page 13

Loading a keycode using Element Manager

If you retrieved a keycode file from the Keycode Retrieval System (KRS), use this method.

To load a keycode file

1Log on to Element Manager and select the BCM you want to access.

For information about how to log on to Element Manager, refer to your administration guide.

2On the Task Navigation Panel, select the Configuration tab.

The configuration folders appear.

3Select the System folder and click the Keycodes task.

The Keycodes panel appears.

4Click Load File.

The Open file dialog box appears.

5Browse to where you saved the keycode file you downloaded from KRS.

6Click Open.

The file uploads and the feature appears in the Keycodes list.

Note: You must have access privileges to enter a keycode on the BCM system.

Contact your system administrator for more information.

Warning: You must reboot your BCM system if a dialog box prompts you to do

so.

10 Chapter 2 Entering keycodes on the BCM system

NN40010-301NN40010-301

Manually adding a keycode using Element Manager

If you do not have a keycode file saved to your computer that uploads automatically, you can enter

the keycode file information manually. For example, you can enter keycode information that your

distributor faxes to you.

You need the information from the keycode file to complete this procedure. You must have the:

• sequence number

• list of features and data values

• expiry date of Try ‘N Buy feature (if applicable)

• 24-digit keycode

To manually add a keycode file

1Log on to Element Manager and select the BCM you want to access.

1For information about how to log on to Element Manager, refer to your administration guide.

2On the Task Navigation Panel, select the Configuration tab.

The Configuration folders appear.

3Select the System folder and then click the Keycodes task.

The Keycodes panel appears.

4Click Modify Feature Licences Table.

The Modify Features Licences Table window appears.

5In the Modify Features Licences Table box, verify that the sequence number in the

Sequence # box is identical to the sequence number in the new keycode file.

6In the Feature Licences table, select the feature you want to modify, and click the number in

the Data column.

7Modify the data feature value to ensure it is identical to the value in the new keycode file.

8Click a feature name to allow the data you entered to be accepted.

Note: The sequence number increases by one each time you obtain a new

keycode file. Element Manager should automatically increase the sequence

number.

Note: If the sequence numbers do not match, manually correct the number so it is

identical to the sequence number in the new keycode file.

Otros manuales para BCM1000

Este manual sirve para los siguientes modelos

Otros manuales de Sistema telefónico de Nortel

Nortel

Nortel BCM50 Manual de usuario

Nortel

Nortel ICS 7.1 Manual de usuario

Nortel

Nortel Meridian Meridian 1 Manual de lista de piezas

Nortel

Nortel BCM200 Manual de usuario

Nortel

Nortel P0857846 Guía del usuario

Nortel

Nortel BCM1000 Manual del producto

Nortel

Nortel DMS-10 Manual de usuario

Nortel

Nortel BCM50 2.0 Guía de instalación

Nortel

Nortel Meridian Meridian 1 Manual de usuario

Nortel

Nortel 2245 Instrucciones de funcionamiento y mantenimiento

Nortel

Nortel Business Communications Manager 2.5 Instrucciones de funcionamiento

Nortel

Nortel BCM50 Manual del operador

Nortel

Nortel BCM50 Manual del operador

Nortel

Nortel Meridian 1 Option 11C Manual de usuario

Nortel

Nortel Compact ICS 7.1 Manual de usuario

Nortel

Nortel BCM50 Manual del producto

Nortel

Nortel BCM50 Guía de instalación

Nortel

Nortel Meridian Meridian 1 Instrucciones de funcionamiento e instalación

Nortel

Nortel BCM50 Manual del producto

Nortel

Nortel Meridian Meridian 1 Instrucciones de funcionamiento e instalación

Nortel

Nortel BCM50 Manual de usuario

Nortel

Nortel North American DMS-100 Manual de usuario

Nortel

Nortel DMS-100 Series Manual de usuario

Nortel

Nortel BCM50 Manual de usuario

Manuales populares de Sistema telefónico de otras marcas

Teleco

Teleco Perfect Voice Tis 16 Manual de usuario

AT&T

AT&T Network Adapter 25 Manual de usuario

AVE

AVE AF902R-CE Manual de usuario

Tynetec

Tynetec Advent xt Manual de usuario

Ericsson

Ericsson DCT1800-S Manual de usuario

NEC

NEC Electra Elite 192 Manual de usuario

Alcatel

Alcatel EASY REFLEXES 4200 Manual de usuario

Panasonic

Panasonic KX-TDA50 Manual de usuario

Bticino

Bticino PABX 28D Manual de usuario

NEC

NEC SL 2100 Manual de usuario

Sonifex

Sonifex Phone In 6 Manual de instrucciones

TransTel Communications

TransTel Communications TD-824i Instrucciones de montaje

Panasonic

Panasonic KX-TS25B Manual de usuario

ASCOM

ASCOM TD 92375GB Manual del propietario

Karel

Karel MS26S Hoja de información del producto

EnGenius

EnGenius DuraFon PRO Manual de usuario

Teledat

Teledat X130 DSL Manual de usuario

SpectraLink

SpectraLink MOG400 Manual de usuario