Norac FLEXI-COIL 67 Series Manual de usuario
FLEXI-COIL Series 67
Installation Manual
Spray Height Controller
Improving the competitiveness o Industry and
Agriculture through Precision Measurement
Printed in Canada
Copyright 2005-08 by NORAC Systems International Inc
Reorder P/N: UC4+BC+FC1-INST REV E (FLEXI-COIL Series 67)
NORAC Systems International Inc reserves the right to improve products and their specifications without notice and without the
requirement to update products sold previously Every effort has been made to ensure the accuracy of the information contained
in this manual The technical information in this manual was reviewed at the time of approval for publication
TABLE OF CONTENTS
1
INTRODUCTION .................................................................................................................................. 1
2
GENERAL SYSTEM DESCRIPTION .................................................................................................. 2
3
PARTS LISTS ...................................................................................................................................... 3
4
INSTALLATION PROCEDURE ........................................................................................................... 8
4.1
EXISTING SYSTEM CHECK ............................................................................................................... 8
4.2
BOOM SPEED TEST........................................................................................................................ 8
4.3
WING SENSOR INSTALLATION....................................................................................................... 10
4.4
MAIN LIFT SENSOR INSTALLATION ................................................................................................ 13
4.5
ROLL SENSOR INSTALLATION ....................................................................................................... 14
4.5.1
Boom Roll Sensor Mounting.................................................................................................. 15
4.5.2
Chassis Roll Sensor Mounting .............................................................................................. 15
4.5.3
Inverted Roll Sensor Mounting .............................................................................................. 17
4.5.4
Temperature pro e................................................................................................................ 17
4.
HYDRAULIC INSTALLATION ........................................................................................................... 18
4.6.1
Valve Assem ly ..................................................................................................................... 18
4.6.2
Valve Mounting...................................................................................................................... 19
4.6.3
Hydraulic Plum ing ...............................................................................................................20
4.7
ELECTRICAL INSTALLATION .......................................................................................................... 21
4.8
COMPLETING THE INSTALLATION .................................................................................................. 25
5
ELECTRICAL REFERENCE – CABLE DRAWINGS ........................................................................ 2
5.1
ITEM C01: 44 2B-40 – SENSOR TRUNK CABLE ......................................................................... 2
5.2
ITEM C01B: 44 87 – SENSOR EXTENSION CABLE ........................................................................ 2
5.3
ITEM C02: 44 8 – SENSOR BRANCH CABLE ............................................................................... 27
5.4
ITEM C02B: 44 4 – CABLE UC4 CAN NODE DUAL .................................................................... 27
5.5
ITEM C03: 44 5 D – CABLE VALVE VARIABLE RATE DT.............................................................. 28
5.
ITEM C04: 44 51 – VALVE EXTENSION CABLE ............................................................................. 28
5.7
ITEM C10: 44 50-09 – POWER CABLE FOR FLEXI-COIL 7 SERIES ............................................ 29
1
1
INTRODUCTION
Congratulations on your purchase of the NORAC UC4+ Spray Height Controller This system is
manufactured with top quality components and is engineered using the latest technology to
provide operating features and reliability unmatched for years to come
When properly used the system can provide protection from sprayer boom damage, improve
sprayer efficiency, and ensure chemicals are applied correctly
Please take the time to read this manual completely before attempting to install the system A
thorough understanding of this manual will ensure that you receive the maximum benefit from
the system
YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or ha e suggestions
regarding the parts list or the installation procedure, please don’t hesitate to contact us ia
the information gi en below:
Phone: 1-800-667-3921 Canada (Toll Free)
1-866-306-6722 United States (Toll Free)
(+33) 06 03 87 80 78 Europe
1-306-664-6711 all other regions
E-mail: ser [email protected]
Website: www.norac.ca
2
2
GENERAL SYSTEM DESCRIPTION
Figure 1 depicts the general system layout of the UC4+ Spray Height Controller system
Figure 1 – System Components and General Location
NOTICE:
Every effort has been made to ensure the
accuracy of the information contained in this
manual All parts supplied are selected
specially to fit the sprayer to facilitate a
complete installation However, NORAC
cannot guarantee all parts fit as intended due
to the variations of the sprayer by the
manufacturer Please read this manual in
its entirety before attempting installation.
ATTENTION:
When installing the UC4+ System please be
aware that at a point in the installation your
sprayer booms will be inoperative until the
installation is complete Any installation
procedure requiring boom mo ement will
need to be done first. Once the hydraulics
have been disconnected you must complete
the electrical installation before the booms
become operative
3
3
PARTS LISTS
The parts that come with your UC4+ Spray Height Controller are listed in Table 1. The item number on
the left side of this table references each part
Please ensure that all parts in your kit are present before proceeding with your installation.
Table 1 – FLEXI-COIL Spray Height Controller System Parts
Item Part Number Name Quantity
B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7 5 IN 1
B10 44700-06 BRACKET VALVE MOUNTING STD 1
B11 44743 MOUNTING BRACKET MAIN LIFT SENSOR UC4 PLUS 1
B13 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY EXTENDED 2
C01 44662B-40 CABLE UC3 SENSOR TRUNK AMPF TO AMPF BLACK STANDARD 40FEET 1
C01B 44687 CABLE UC3 SENSOR TRUNK PT EXTENSTION AMPM TO AMPF BLACK 14FEET 1
C02 44668 CABLE UC3 SENSOR BRANCH 1 AMP RECEPT 3 AMP PLUG BC 1
C02B 44664 CABLE UC4 CAN NODE DUAL 1
C03 44656D CABLE VALVE VARIABLE RATE DT 1
C04 44651 CABLE VALVE EXTENSION 1
C10 44650-09 CABLE POWER FOR FLEXI-COIL 67 SERIES 1
E01 4461BC+ UC4 PLUS BOOM CONTROL PANEL 1
E02 44631 UC4 ULTRASOUND SENSOR 3
E03 44641 UC4 PLUS ROLL SENSOR W TEMPERATURE PROBE 1
E04 44642 UC4 PLUS ROLL SENSOR 1
H04 44863-29 HOSE ASSEMBLY 122R2-06 36 IN L 8FJX90 6FJX 2
H20 44865-07 HYDRAULICS FITTING KIT - FC1 1
M01 446BC+MAN7 OPERATOR MANUAL UC4+ SPRAY HEIGHT CONTROL 1
M10 UC4+BC+FC1-INST MANUAL INSTALLATION UC4+ FLEXI-COIL 67 SERIES 1
V01 44963D VALVE BLOCK ASSEMBLY 2 STATION CC/LS PROP DT 4 BOLT 1
4
Substitution parts will in no way affect the operation of the system pro ided that they are installed
as directed.
Item V01 – 2 Station Val e Block (44963D) may be substituted with:
Item Part Number Name Quantity
V01 44933D VALVE BLOCK ASSEM UC4-BC 2-STATION CC/LS VARIABLE RATE 1
The 44933D is a direct replacement for the 44963D Both valve blocks function the same The blocks
are identifiable by the filter cap shape and by the part number stamped on the side
The A and B ports are opposite on each al e block so erify that the hoses are being connected to
the correct port. The raise lines always go to the “B” port and the lower lines go to the “A” port.
44933D Val e Block Shown Alongside 44963D Val e Block
Filter Cap Part Number
(44933D) Filter Cap Part Number
(44963D)
5
Table 2 - 44865-07 - Hydraulics Fittings Kit – FC1
Item Part Number Name Quantity Picture
F02 104369 PLUG - 6MBP 4
F03 104643 FEMALE ADAPTER - 8FP 8FJX 2
F04 104627 TEE ADAPTER - 8MBR 8MJT 2
F05 104929 MALE TO FEMALE ADAPTER - 6MB 8FB 2
F06 103312 MALE ADAPTER - 6MB 6MJ 6
F07 44928 ORIFICE INSERT 047 IN ONE WAY 4
6 M B - 6 M OR X 90
SIZE IN
1/16TH'S
GENDER: MALE
OR FEMALE
90
°
ANGLE
SWIVEL
TYPE
GENDER
SIZE
TYPE:
B - ORB
- IC
OR - FLAT
FACE
P - PIPE
Fitting Name
Example:
The use of dielectric grease is not recommended on any NORAC electrical connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of the supplied
Permatex Anti-seize grease to all threaded parts upon installation. Permatex Anti-seize lubricant is
preferred, but other similar anti-seize products may be used.
6
The parts that come with your UC4+ System are shown below in their general installation
configuration.
Figure 2 – UC4+ Spray Height Controller Components
7
Figure 3 – Hydraulic Plumbing Schematic
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Controladores de Norac
Norac
Norac UC4.5 Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC4 Plus Rogator 1286C Manual de usuario
Norac
Norac UC4+ Case 44 Series Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC4.5 Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC4+ Guía
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC4 Plus Rogator 64 Series Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC4 Plus Rogator 64 Series Manual de usuario
Norac
Norac UC4+ 1200/1600 Manual de usuario
Norac
Norac UC4+ Apache 1010 2005+ Manual de usuario
Norac
Norac UC4 Total Control Manual de usuario
