Nidec MF-2 Manual de usuario

The MF mechanical force gauge is a direct reading, dial type instru-

ment designed for measuring tension and compression forces. All

models are housed in a rugged, aluminum, ergonomically designed

housing which makes these instruments ideal for material testing,

manufacturing, quality control and laboratory environments.

Overload capacity is 165 lbs (75 kg) for all models.

1. Tension Sensing - Measure tensile forces using the hook attach-

ments.

2. Measure Switch - Use this switch to select real time or peak force.

3. Tare Ring - Rotate tare ring to compensate the attachment’s

weight.

4. Compression Sensing - Measure compressive forces with follow-

ing attachments: flat head, conical head, chisel head and notched

head.

Series MF Mechanical Force Gauge

Operation Manual

Do not operate or store instrument in the following

locations:

Explosive areas, near water, oil, dust or chemicals; ar-

eas where the temperatures can exceed 104°F

(40° C)

Take precaution to not drop the force gauge. Damage

to the sensor may occur.

Do not modify, disassemble or attempt to repair the

unit. Send to the factory for proper repair.

If upon delivery damage to the unit is detected, do not

operate the unit. Notify the shipping carrier immedi-

ately to obtain damage claim instructions.

Only measure forces that are in line with the measur-

ing shaft. Do not attempt to take any measurements

(tension or compression) at any angle. Failure to keep

measurements in line will damage the instrument.

Do not exceed capacity of unit.

Accuracy may be affected if unit is exposed to high

humidity, dust or extreme shock.

SPECIFICATIONS

Accuracy: ±0.2% F.S.

Display Analog: 2˝in diameter (50 mm); rotatable 360˚for taring

purposes

Live/Peak Mode: Selectable

Needle Update: Immediate

Threaded Insert: Eight M3 inserts

Stroke: 10 mm

Overload Capacity: 165 lbs (75 kg)

Product Weight: 1.6 lbs (0.73 kg)

Package Weight: 4 lbs (1.81 kg)

Included Accessories: Carrying case and attachments (flat-

head, hook, chisel, notched head, cone head, extension rod, large

hook and large V-hook)

OPERATION

1. Use “selector button” to select average (real time) or peak mode.

2. Add proper attachment to push or pull measuring end.

3. Rotate tare ring to read”0”. Adjustment should be made under the

same conditions as those used when measuring actual load.

4. To select average mode, push button down and turn all the way

counter clockwise.

5. To select peak mode, turn button all the way clockwise. To reset to

zero, push button slightly.

Note: When in average mode you can still freeze the indicator nee-

dle when desired measurement is reached by turning selector all the

way clockwise.

English Dial Model MF-2 MF-5 MF-10 MF-20 MF-30 MF-50 MF-100

Capacity 2 lb 5 lb 10 lb 20 lb 30 lb 50 lb 100 lb

Dial Graduation 0.01 lb 0.025 lb 0.05 lb 0.1 lb 0.2 lb 0.25 lb 0.5 lb

Metric Dial Model MF-1KG MF-2KG MF-3KG MF-5KG MF-10KG MF-20KG MF-30KG MF-50KG

Capacity 1 kg 2 kg 3 kg 5 kg 10 kg 20 kg 30 kg 50 kg

Dial Graduation 0.005 kg 0.01 kg 0.02 kg 0.025 kg 0.05 kg 0.1 kg 0.2 kg 0.25 kg

DIMENSIONS

Optional MFP-Handle

Ideal for Heavy Loads

Este manual sirve para los siguientes modelos

Otros manuales de Instrumento de medición de Nidec

Nidec

Nidec Shimpo FG-L1 Manual de usuario

Nidec

Nidec FG-7000T Manual de usuario

Nidec

Nidec DT-501X Manual de usuario

Nidec

Nidec SHIMPO DT-5TXR Manual de usuario

Nidec

Nidec Kato Engineering KRM2000 Manual de usuario

Nidec

Nidec PG-35 Manual de usuario

Nidec

Nidec FGE-HXY Manual de instalación

Nidec

Nidec Shimpo MT-200 Manual de usuario

Nidec

Nidec FG-3000R-S Manual de usuario

Nidec

Nidec ST-1100 Manual de usuario

Nidec

Nidec FG-7000L Manual de usuario

Nidec

Nidec FG-7000TA Manual de usuario

Nidec

Nidec SHIMPO G-7000L-S-2 Manual de usuario

Nidec

Nidec ST-1100 Manual de usuario

Nidec

Nidec DT-105A Manual de instalación

Nidec

Nidec ST-1100 Manual de usuario

Nidec

Nidec DT-361 Manual de usuario

Nidec

Nidec DT-200LR-S12 Manual de usuario

Nidec

Nidec DT-361 Manual de usuario

Nidec

Nidec TNP Series Manual de usuario

Nidec

Nidec MT-200 Manual de usuario

Nidec

Nidec ST-1100 Manual de usuario

Nidec

Nidec ST-1100 Manual de usuario

Nidec

Nidec TNP Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario