NETGEAR FS700TS Manual de usuario

Otros manuales para FS700TS

1

Otros manuales de Cambiar de NETGEAR

NETGEAR

NETGEAR MBR1210-1BMCNS - This Product is a Special... Guía de inicio rápido

NETGEAR

NETGEAR GS908E Manual de usuario

NETGEAR

NETGEAR ProSafe FS750T Manual de usuario

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Manual de usuario

NETGEAR

NETGEAR ProSafe GS105 Manual de usuario

NETGEAR

NETGEAR MS510TX Manual de usuario

NETGEAR

NETGEAR ProSAFE M7100-24X Manual de usuario

NETGEAR

NETGEAR GS724T - ProSafe Switch Manual de usuario

NETGEAR

NETGEAR GSM7224 - Switch Manual de usuario

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Manual de instrucciones

NETGEAR

NETGEAR GC728X Manual de usuario

NETGEAR

NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual de usuario

NETGEAR

NETGEAR GS608v3 Manual de usuario

NETGEAR

NETGEAR S350 Series Manual de usuario

NETGEAR

NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart... Manual de usuario

NETGEAR

NETGEAR GS716T - ProSafe Switch Manual de usuario

NETGEAR

NETGEAR ProSAFE GS105PE Manual de usuario

NETGEAR

NETGEAR ProSafe Plus JGS524E Manual de usuario

NETGEAR

NETGEAR ProSafe GSM7324 Manual de usuario

NETGEAR

NETGEAR FS108 - ProSafe 10/100 Desktop Switch Manual de operación

NETGEAR

NETGEAR GS605AV Manual de usuario

NETGEAR

NETGEAR GS205 Manual de usuario

NETGEAR

NETGEAR FA311 - 10/100Mbps PCI Ethernet Interface... Manual de usuario

NETGEAR

NETGEAR GS724Tv1 - ProSafe Gigabit Smart Switch Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

FS700TS switch –Configuring VLANs (single unit)

VLAN-Definition

VLANs are logical subgroups within a Local Area Network (LAN), which combine user stations,

and network devices into a single unit, regardless of the physical LAN segment to which they are

attached. VLANs allow network traffic to flow more efficiently within subgroups. VLANs use

software to reduce the amount of time it takes for network changes, additions, and moves to be

implemented.

Notes when setting-up VLANs

• A VLAN does not have a minimum number of port

• VLANs work at the OSI Layer 2

• A VLAN can be created per unit, device or via logical connection/combination

• Broadcast and Multicast traffic is transmitted only in the VLAN in which traffic is generated.

• To allow traffic between VLAN a device working at protocol level (Layer 3) is required

VLAN-Tagging

VLAN tagging provides a method of transferring VLAN information between VLAN groups. VLAN

tagging attaches a 4-byte tag to packet headers. The VLAN tag indicates to which VLAN the

packets belong. VLAN tags are attached to the VLAN by either the end station or the network

device. VLAN tags also contain VLAN network priority information.

Creating a new VLAN

Working instructions

1) Log on to the device using the Smart Wizard or via the URL http://<<switchaddress>>

2) Browse to Switch –VLAN - Properties (Note: VLAN1 cannot be modified)

3) Click on Add

4) Set the VLAN ID and VLAN name

5) Click Apply

Assign ports to a VLAN

1) Browse to VLAN –Membership

2) From the VLAN ID list –select the VLAN you want to add ports to (by default all the

ports are members of VLAN1)

- Each port has a Current and Static box associated with -

3) Click on the Static box correspondent to the port until this show a U (Untagged)

symbol

4) Repeat point 3) for all the ports that are required to be member of the VLAN

5) Click Apply when completed

6) Browse to Interface PVID settings and set the PVID of each port assigned to the new

VLAN to the VLAN ID (for VLAN2 PVID = 2 , for VLAN3 PVID = 3….)

7) Click on Apply to finalise the changes

Verify the VLAN is working

Working instructions

1) Configure two PCs with unique IP address (within the same range) and same subnet

mask

2) Patch each PC in one of the ports that are members of the VLAN you wish to test

3) You should now be able to ping each machine from the other

4) Re-patch one of the machines to a port on a different VLAN

5) You should not be able to ping such machine from the others

Setting-up a VLAN (Web-GUI)

1) Log on to the device using the Smart Wizard or via the URL http://<<switchaddress>>

2) Browse to Switch –VLAN - Properties (Note: VLAN1 cannot be modified)

3) Click on Add

4) Set the VLAN ID and VLAN name

5) Click Apply

Assign ports to a VLAN (Web-GUI)

1) Browse to VLAN –Membership

2) From the VLAN ID list –select the VLAN you want to add ports to (by default all the

ports are members of VLAN1)

- Each port has a Current and Static box associated with -

3) Click on the Static box correspondent to the port until this show a U (Untagged)

symbol

4) Repeat point 3) for all the ports that are required to be member of the VLAN

5) Click Apply when completed

6) Browse to Interface PVID settings and set the PVID of each port assigned to the new

VLAN to the VLAN ID (for VLAN2 PVID = 2 , for VLAN3 PVID = 3….)

7) Click on Apply to finalise the changes