NETGEAR R6900P Manual de usuario

Do More

Nighthawk

AC1900 Smart WiFi Router

Model R6900P

WiFi Network Name and Password

The preassigned WiFi network name (SSID) and password (network

key) are unique to your router, like a serial number. Because the router

automatically uses WiFi security, you don’t need to set it up. The WiFi

settings are on the router label.

We recommend that you use the preassigned WiFi settings because you

can check the label if you forget them. You can also log in to the router to

change these settings.

You can write the WiFi settings from the router label in this space for easy

reference. If you change the WiFi settings, write the new settings here for

easy reference and store this booklet in a safe place.

WiFi network name (SSID):

Network key (password):

Join the WiFi Network

You can either use Wi-Fi Protected Setup (WPS) or select your router’s

WiFi network and type its password.

Join the WiFi Network Using WPS

For help with the WPS button on your WPS-enabled device, check

the instructions or online help that came with that device. Some older

equipment cannot use WPS.

¾To join the network using WPS:

1. Press the WPS button on the router for three to five seconds.

The WPS LED on the router blinks white.

2. Within two minutes, on your WPS-enabled device, press its WPS

button or click its onscreen WPS button.

The WPS LED on the router lights solid white when the WPS-enabled

device connects to your router.

3. Repeat this process to add other WPS-enabled devices.

Join the WiFi Network Using the Router’s WiFi

Settings

Use the router’s WiFi network name and password to connect your

WiFi-enabled computer or mobile device to the router’s network through

WiFi. If you did not change the router’s WiFi network name and password,

use the router’s preassigned WiFi network name and password, which are

on the router label.

¾To select your network and enter its password:

1. On your WiFi-enabled computer or mobile device, open the WiFi

connection manager that manages your WiFi connections.

The WiFi connection manager scans for WiFi networks in your area.

2. Find and select your router’s WiFi network name (SSID).

The SSID is on the router label.

3. Enter the router’s password (or your custom password if you changed

it) and click the Connect button.

The password is on the router label.

4. Repeat Step 1 through Step 3 to add other computers or mobile

devices.

View or Change the Router Settings

After you use the NETGEAR installation assistant to set up the router, you

can log in to the router to view or change its settings.

¾To log in to the router:

1. Connect a computer or mobile device to the router.

You can connect using an Ethernet connection or a WiFi connection:

• Ethernet. To connect using a wired connection, use an Ethernet

cable (not included) to connect an Ethernet port on your

computer to an Ethernet port on the router.

• WiFi. To connect using a WiFi connection, look on the router’s

label for the preassigned WiFi network name and password. Open

the WiFi connection manager on your WiFi-enabled computer or

mobile device, find the router’s WiFi network name, and use the

router’s password to connect.

2. Launch a web browser and visit www.routerlogin.net.

A login window opens.

3. Enter router admin user name and admin password.

The admin user name is admin. If you did not change the admin

password, the default password is password.

The BASIC Home page displays.

Change the WiFi Network Name and Password

The router’s preset WiFi network name (SSID) and password are on the

router label. If you want to change your router’s WiFi network name and

password, log in to the router.

¾To change the router’s WiFi network name and password:

1. Launch a web browser from a computer or mobile device that is

connected to the network and visit www.routerlogin.net.

A login window opens.

2. Enter router admin user name and admin password.

The admin user name is admin. If you did not change the admin

password, the default password is password.

The BASIC Home page displays.

3. Select Wireless.

The Wireless Setup page displays.

4. To change the WiFi network name (SSID), enter a new name in the

Name (SSID) field.

5. To change the WiFi password, enter a new password in the Password

(Network Key) field.

6. Click the Apply button.

Your settings are saved.

Change the admin Password

¾To change the admin password:

1. Launch a web browser from a computer or mobile device that is

connected to the network and visit www.routerlogin.net.

A login window opens.

2. Enter router admin user name and admin password.

The admin user name is admin. If you did not change the admin

password, the default password is password.

3. Select ADVANCED > Administration > Set Password.

The Set Password page displays.

4. Type your old password and type the new password twice.

5. To be able to recover the password, select the Enable Password

Recovery check box.

We recommend that you enable password recovery.

6. Select two security questions and provide answers to them.

7. Click the Apply button.

Your settings are saved.

Recover a Forgotten admin Password

The default password for the admin user name is password. If you

changed the password and enabled the password recovery feature, you

can retrieve this password.

¾To retrieve a forgotten admin password:

1. Launch a web browser from a computer or mobile device that is

connected to the network and visit www.routerlogin.net.

A login window opens.

2. Click the Cancel button.

If password recovery is enabled, you are prompted to enter the serial

number of the router. The serial number is on the router label.

3. Enter the serial number of the router.

4. Click the Continue button.

A page displays requesting the answers to your security questions.

5. Enter the saved answers to your security questions.

6. Click the Continue button.

A page displays your recovered password.

7. Click the Login again button.

A login window opens.

8. With your recovered password, log in to the router.

Enable Dynamic Quality of Service

Dynamic Quality of Service (QoS) resolves Internet traffic congestion

when Internet bandwidth is limited by using better application and device

identification, bandwidth allocation, and traffic prioritization techniques. If

you like gaming and streaming videos, then you can benefit from enabling

Dynamic QoS.

Note: If you use a gigabit Internet connection, or your Internet download

and upload speed is 300 Mbps or faster, then you don’t need to use

Dynamic QoS.

¾To enable Dynamic QoS:

1. Launch a web browser from a computer or mobile device that is

connected to the network and visit www.routerlogin.net.

A login window opens.

2. Enter router admin user name and admin password.

The admin user name is admin. If you did not change the admin

password, the default password is password.

The BASIC Home page displays.

3. Select Dynamic QoS.

The Dynamic QoS page displays.

4. Select the Enable Dynamic QoS check box.

5. Specify your Internet bandwidth.

You can use Speedtest to detect your Internet bandwidth or you can

enter your Internet bandwidth manually. We recommend that you use

Speedtest.

To use Speedtest to detect your Internet bandwidth, do the following:

a. For more accurate Speedtest results, make sure that no other

devices are accessing the Internet.

b. Click the Speedtest button.

Speedtest determines your Internet bandwidth.

6. Click the Apply button.

Your settings are saved.

7. To view bandwidth utilization by device and application, click the Click

here to see bandwidth utilization by device and application link

at the bottom of the page.

For more information, see the user manual, which is available online

at downloadcenter.netgear.com or through a link in the router’s user

interface.

Otros manuales para R6900P

Tabla de contenidos

Otros manuales de Enrutador de red de NETGEAR

NETGEAR

NETGEAR SXK50 Manual de usuario

NETGEAR

NETGEAR Orbi RBR350 Manual de usuario

NETGEAR

NETGEAR RM356 - Router - EN Manual de usuario

NETGEAR

NETGEAR DG834GVv2 - ADSL2+ Modem And Wireless Router Manual de usuario

NETGEAR

NETGEAR MVBR1210C Manual de usuario

NETGEAR

NETGEAR LBR20 Manual de usuario

NETGEAR

NETGEAR RAX49 Manual de usuario

NETGEAR

NETGEAR RP614 - Web Safe Router Manual de usuario

NETGEAR

NETGEAR N300 Manual de usuario

NETGEAR

NETGEAR Nighthawk M6 Pro Manual de usuario

NETGEAR

NETGEAR WNDR4500 Manual de usuario

NETGEAR

NETGEAR PE102 Manual de usuario

NETGEAR

NETGEAR C6300 Manual de usuario

NETGEAR

NETGEAR C6220 Manual del operador

NETGEAR

NETGEAR C7000v2 Manual de usuario

NETGEAR

NETGEAR MR90 Manual de usuario

NETGEAR

NETGEAR N150 Manual de usuario

NETGEAR

NETGEAR PR2000 Manual de usuario

NETGEAR

NETGEAR Nighthawk AD7200 Manual de usuario

NETGEAR

NETGEAR RT311 Cómo utilizar

NETGEAR

NETGEAR GC728X Manual de usuario

NETGEAR

NETGEAR RP114 Manual de usuario

NETGEAR

NETGEAR Nighthawk AXE11000 Manual de usuario

NETGEAR

NETGEAR RP614 v2 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario