NetComm Smart Hub 4G Manual de usuario

NetComm Smart Hub 4G

Quick Start Guide

Setting up your Smart Hub

Getting started

Important Notice about your SIM Card: Your SIM card is designed to only

work with your Smart Hub and is locked to this one device. If you insert your

SIM into another device you will not be able to access the internet.

If your SIM card was not activated & inserted into your Smart Hub at your point

of purchase, please call TELUS Customer Care at 1-866-558-2273 to activate

it now. To insert it into your Smart Hub see step 2 below.

1. Attach the supplied antenna in a

clockwise direction, to the port

marked 4G Antenna.

2. If your activated SIM card was not inserted into your Smart Hub by your

point of purchase insert it now into the SIM card port (until you hear a click).

4G Antenna port

Smart Hubantenna

3. Connect the power adapter to the power port,

and plug into the wall socket. The power LED on

the side of the Smart Hub will stop flashing once

the Smart Hub is ready, approximately 60 seconds.

The Smart Hub will be connected to the Internet

when the 4G LED light on the side of the unit is blue.

4. For voice calls, connect a standard analog telephone to

the Line 1 port using the grey telephone cable provided.

Please note: Fax machines are not supported by the Smart Hub.

SIM card port

Smart Hub

SIM

card

power port

Smart Hub

power adaptor

Smart Hub

Line 1 port

Wired Internet Connection

Connecting your device (laptop, computer, other) to the

Internet with an Ethernet cable.

1. Connect the yellow Ethernet cable provided to the LAN port and connect

the other end to your computer.

2. Wait approximately 30 seconds for the connection to establish. The LED

light will be blue on the side of the Smart Hub (it could be solid or flashing).

For additional support with setting up or troubleshooting your

Smart Hub please call TELUS Customer Care at 1-866-558-2273

or visit telusmobility.com/support.

Wireless (Wi-Fi) Internet Connection

Connecting your device (laptop, computer, other)

to the Internet.

Follow these simple steps to set-up a wireless (Wi-Fi) connection to your

Smart Hub:

Important note: Please refer to the Wireless Security Card that is included in

the box for connecting Wi-Fi devices. It contains the Wireless Network Name

(SSID) and your Wireless Security Key (Password). This information is also

located on the bottom of the Smart Hub unit.

1. Ensure Wi-Fi is enabled on your device (computer/laptop/smartphone/tablet).

2. From your device (laptop, computer, other), select the Wi-Fi icon on your

device and select Available Networks or Scan for Networks Available to

display all available networks within your range.

3. Connect to the network name that matches the Wireless Network

Name (SSID) found on the Wireless Security Card, for example

“TELUS_Smart_Hub_70” 4

Wireless security card

Wireless Network Name (SSID):

Nom du réseau sans fil (SSID):

Wireless Security Key (WPA-PSK):

Clé de sécurité sans fil (WPA-PSK):

Carte de sécurité sans fil

Your Wi-Fi icon may look like one of the following:

Ethernet cable

Desktop or Laptop

Ethernet/LAN port

PC Ethernet /

LAN port symbol

MAC Ethernet /

LAN port symbol

<•••>

Smart Hub

LAN port

Mac

Windows

4. When prompted for your wireless security settings, enter the Wireless

Security Key (Password) listed on your Wireless Security Card,

please note it is case sensitive.

5. Wait approximately 30 seconds for the connection to establish.

6. You may connect up to 15 Wi-Fi enabled devices. Repeat steps 1 through 5.

Using your Smart Hub Phone

The Smart Hub offers the ability to make calls via your 4G service. Please

familiarize yourself with the Smart Hub calling features below which are slightly

different from your landline or mobile phone.

Setting up voicemail

1. Dial your 10 digit phone number from the phone connected to your

Smart Hub (not mobile phone or landline), to set-up voicemail.

2. When prompted, set-up your password (between 4 and 15 digits).

3. Once you have set-up your password you will be asked to record your

name and personal greeting.

4. Once you are prompted that voicemail set-up is complete you may hang up

or press *to end the call.

Accessing voicemail

To access your voicemail, dial your 10-digit mobile number.

When prompted, enter your voicemail password.

Using call-waiting

1. When you’re on the phone and receive another phone call, you will hear a

single, soft beep. If you do not take the incoming call, you will hear another

soft beep 10 seconds later.

2. To answer call waiting, press the flash/recall button. You will be connected

to the waiting call.

3. To end the call waiting call and return to the original call press the flash/

recall button or the hook on the phone.

For advanced calling features, please consult the user manual on the

included CD.

Changing your Smart Hub settings

Through the Smart Hub’s web user interface, an online tool, you can configure

and change your Smart Hub’s settings.

To access the web user interface:

1. Open your Web browser and type 192.168.20.1 into the address bar and

press ENTER.

2. Enter your default username and password

username: admin

password: admin

3. The first time you access this tool, you will be prompted to complete a

setup wizard.

4. Consult the user manual included on the CD in your box for specific

information on how to configure and or change your settings such as:

nYour web user interface user name and password

nYour wireless settings (Wireless Network Name (SSID),

Wireless Security Key (Password)

nPort forwarding & other advanced settings.

Tabla de contenidos

Otros manuales de Enrutador de red de NetComm

NetComm

NetComm NP5410 Manual de usuario

NetComm

NetComm Telus Smart Hub Manual de usuario

NetComm

NetComm N3G007W Manual de usuario

NetComm

NetComm NP290W Manual de usuario

NetComm

NetComm NetComm Gateway Series Manual de usuario

NetComm

NetComm Freshtel NB9 Manual de usuario

NetComm

NetComm YML25WVR Manual de usuario

NetComm

NetComm NB5 Manual de usuario

NetComm

NetComm 3GM1WN Manual de usuario

NetComm

NetComm VELOCITY NP805N Manual de usuario

NetComm

NetComm NF20 Manual de usuario

NetComm

NetComm NTC-220 Manual de usuario

NetComm

NetComm NB6 Manual de usuario

NetComm

NetComm RTA1030W Manual de usuario

NetComm

NetComm NWL-15 Manual de usuario

NetComm

NetComm NTC-6200 Manual de usuario

NetComm

NetComm NCT-1000 Manual de usuario

NetComm

NetComm XBox NF1901ACV Manual de usuario

NetComm

NetComm NF15ACV Manual de usuario

NetComm

NetComm NB5PLUS4W Manual de usuario

NetComm

NetComm NF12 Manual de usuario

NetComm

NetComm N3G005W Manual de usuario

NetComm

NetComm NB5PLUS4 Manual de usuario

NetComm

NetComm 4GM3W Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad