Neilsen CT0527 Manual de usuario

ENGINE TIMING TOOLS FOR VAG 1.2 TSI / TFSI

CT0527

INSTRUCTION MANUAL

GENERAL

For adjusting the timing during replacement of the timing chain, renewing of the

cylinder head gasket, etc.

Applications:

Audi models A1 and A3

VW New Beetle, Caddy, Golf, Jetta, Polo, Touran

Skoda Fabia, Fabia Combi, Wildwasser,

Oktavia,Roomster, Yeti

Seat Altea, Ibiza, Leon, Toledo

Engine codes: CBZA, CBZB, CBZC

CONTENTS

1. Camshaft Setting Tool,

to be used as OEM T10414

2. Guide Pins,

to be used as OEM T10341

3.Crankshaft Locking Bolt,

to be used as OEM T10340

SAFETY INSTRUCTIONS

• Do not use the tool if parts are missing or damaged.

• Use the tool for the intended purpose only.

• Never place the tool on the vehicle battery. There is a risk of a short circuit.

• Be careful when working with the engine running. Loose clothing, tools and

other objects can be caught by rotating parts and cause serious injury.

• Keep children and other unauthorized persons away from the work area.

• Do not allow children to play with the tool or its packaging.

• Be careful when working on hot engines because of the risk of burn injuries.

• If you remove the ignition key before repairing, you can prevent the engine from

being started accidentally and resulting in engine damage.

• This manual serves as a brief guide and does not replace a workshop manual.

Always refer to the vehicle-specific service literature, particularly the technical

data such as torque values and instructions for disassembly/assembly, etc.

• After repair or before starting the engine, turn a minimum of 2 turns by hand and

check the timing again.

• Turn the engine only in the normal direction of rotation (clockwise unless

otherwise specified).

• Do not use locking tools for camshaft and crankshaft as a counter-holder,

during loosening or tightening screws on pulleys, camshafts or crankshafts. This

can damage tools and engine components. Only use tools that are suitable for

this purpose.

INSTRUCTIONS FOR USE

Camshaft Setting Tool (1),

to be used as OEM T10414

•Align the camshaft slot by turning the

camshaft.

• Insert the tool and fix it with the screw.

Guide Pins (2),

to be used as OEM T10341

On compressor models, use the guide

pins instead of the mounting screws (A)

to guide the compressor up and down.

Crankshaft Locking Bolt (3),

to be used as OEM T10340

• Insert the crankshaft fixing bolt into the opening provided.

Note: The crankshaft fixing bolt only fixes the crankshaft in normal direction of

motor rotation. The end of the crankshaft fixing bolt must be specially designed

for this touch the intended surface on the crankshaft.

• If the crankshaft fixing bolt cannot be fully inserted, this means that the

crankshaft is not in the correct position.

• Remove the crankshaft fixing bolt and turn the crankshaft approx. 90 ° in the

normal direction of rotation of the engine keep turning.

• Insert the crankshaft fixing bolt up to the stop.

• Continue turning the crankshaft in the direction of engine rotation until it rests

against the crankshaft fixing bolt.

• Tighten the crankshaft fixing bolt to 30 Nm.

CANNON TOOLS LTD

Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.

www.cannontools.co.uk

Tabla de contenidos

Otros manuales de Herramientas de Neilsen

Neilsen

Neilsen CT3583 Manual de usuario

Neilsen

Neilsen CT2102 Manual de usuario

Neilsen

Neilsen OPEL VAUXHALL CT2909 Manual de usuario

Neilsen

Neilsen CT2737 Manual de usuario

Neilsen

Neilsen CT2266 Manual de usuario

Neilsen

Neilsen CT2247 Manual de usuario

Neilsen

Neilsen CT1533 Manual de usuario

Neilsen

Neilsen CT5823 Manual de usuario

Neilsen

Neilsen CT4694 Manual de usuario

Neilsen

Neilsen VAG CT5467 Manual de usuario

Neilsen

Neilsen CT4342 Manual de usuario

Neilsen

Neilsen CT0729 Instrucciones de operación

Neilsen

Neilsen CT1056 Manual de usuario

Neilsen

Neilsen CT5271 Manual de usuario

Neilsen

Neilsen NAH-A30B Manual de usuario

Neilsen

Neilsen CT0676 Manual de usuario

Neilsen

Neilsen CT4790 Manual de usuario

Neilsen

Neilsen CT1057 Manual de usuario

Neilsen

Neilsen CT4852 Manual de usuario

Neilsen

Neilsen CT1535 Manual de usuario

Neilsen

Neilsen CT4794 Manual de usuario

Neilsen

Neilsen CT4621 Manual de usuario

Neilsen

Neilsen CT4188 Manual de usuario

Neilsen

Neilsen CT4448 Instrucciones de operación

Manuales populares de Herramientas de otras marcas

Martor

Martor SECUNORM 175 Manual de usuario

ERKCO

ERKCO 1000 Manual de usuario

jbc

jbc N4473 Manual de usuario

FEINMETALL

FEINMETALL FZWZ-SET-001 Manual de usuario

Worx Professional

Worx Professional Sonicrafter WU676 Manual de usuario

Gage Bilt

Gage Bilt GB713SH Manual de usuario

Hilti

Hilti DX 9-ENP Manual de usuario

norbar

norbar NORTRONIC 34399 Manual de usuario

BGS technic

BGS technic 8578 Manual de usuario

Makita

Makita DHR241 Manual de usuario

Motor Guard

Motor Guard JMB-1250 Manual de usuario

Power Adhesives

Power Adhesives 805-12 Manual de usuario

Clemco

Clemco 24189 Manual de usuario

VVG

VVG VNG 903 Series Manual de usuario

Hilti

Hilti FX 3-A Manual de usuario

Grizzly

Grizzly H6472 Manual de usuario

axing

axing BWZ 5-02 Manual de usuario

Dh-Robotics

Dh-Robotics RGI-100 Cómo utilizar