Neilsen CT2266 Manual de usuario

131PIECE THREAD REPAIR SET

CT2266

INSTRUCTION MANUAL

IMPORTANT:

These instructions accompanying the product are the original instructions. This

document is part of the product, keep it for the life of the product passing it on to

any subsequent holder of the product. Read all these instructions before

assembling, operating or maintaining this product.

Cannon Tools Limited

Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

1. SPECIFICATION

5pcs Installation Tools

5pcs Break Pin Tools

5pcs Twist Drills

1pc Hex Key

5pcs Taps

110pcs wire thread inserts:

M15 X 0.8 X 6.7mm

M6 X 1.0 X 8.0mm

M8 X 1.25 X 10.8mm

M10 X 1.5 X 13.5mm

M12 X 1.75 X 16.3mm

Warning: Wear approved safety glasses and ear defenders.

2. IMPORTANT SAFETY INFORMATION

a). Read the instruction manual fully. Do not attempt any operation until you have

read and understood this manual.

b). Most important you must know how to use the product.

c). Do not overload or misuse the tool. All tools are designed for a purpose and

are limited to what they are capable of doing. Overloading a tool will result in tool

failure and user injury.

d). Maintain your tools correctly. A well maintained tool will do the job safely.

Replace any damaged or missing parts immediately with original parts from the

manufacturer.

3. TECHNICAL DESCRIPTION

1.Twist Drill 5.2mm 2.Screw Tap M5x0.8

3.Installation Tool

4.Breaking Pin Tool

5.Twist Drill 6.3mm 6.Screw Tap M6x1.0

7.Installation Tool

8.Breaking Pin Tool

9.Twist Drill 8.3mm 10.Screw Tap M8x1.25

11.Installation Tool

12.Breaking Pin Tool

13.Twist Drill 10.5mm

14.Screw Tap M10x1.5

15.Installation Tool

16.Breaking Pin Tool

17.Twist Drill 12.5mm 18.Screw Tap M 12x1.75

19.Installation Tool

20.Breaking Pin Tool

Thread Insert 5mm Thread Insert 6mm

Thread Insert 8mm Thread Insert 10mm

Thread Insert 12mm

4. UNPACKING AND CHECKING

Carefully remove the product from the packaging and examine it for any sign of

damage that may have happened during shipping. Lay the contents out and

check them against the parts shown below. If any part is damaged or missing;

please contact the seller and do not attempt to use the product .

5. USING THE TOOL

1.Drill out the damaged thread using the correctly sized twist drill bit provided.

2.Tap drilled hole using screw tap provided.

3.Load thread insert into installation tool.

4.Screw insert into threaded hole.

5.Remove the tag from the using the breaking pin tool.

6.Thread is repaired and ready to use.

6. DISPOSAL

At the end of the machine's working life, or when it can no longer be repaired,

ensure that it is disposed of according to national regulations.

Contact your local authority for details of collection schemes in your area.

In all circumstances:

Do not dispose of this tool with domestic waste.

Do not incinerate.

During decommissioning of the equipment, certain hazards should be

understood and avoided:

Only with the line pressure released shall the equipment be disassembled.

7. EXPLANATION OF SYMBOLS

WARINING!

First read the instruction manual.

Wear safety glasses and ear protection.

Wear gloves.

CANNON TOOLS LTD

Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.

Made in China

Tabla de contenidos

Otros manuales de Herramientas de Neilsen

Neilsen

Neilsen CT4342 Manual de usuario

Neilsen

Neilsen CT4790 Manual de usuario

Neilsen

Neilsen CT0933 Manual de usuario

Neilsen

Neilsen CT0527 Manual de usuario

Neilsen

Neilsen CT4793 Manual de usuario

Neilsen

Neilsen CT0676 Manual de usuario

Neilsen

Neilsen CT1056 Manual de usuario

Neilsen

Neilsen CT1057 Manual de usuario

Neilsen

Neilsen CT4448 Instrucciones de operación

Neilsen

Neilsen CT4794 Manual de usuario

Neilsen

Neilsen CT5271 Manual de usuario

Neilsen

Neilsen CT3583 Manual de usuario

Neilsen

Neilsen CT2247 Manual de usuario

Neilsen

Neilsen CT1509 Manual de usuario

Neilsen

Neilsen CT4188 Manual de usuario

Neilsen

Neilsen OPEL VAUXHALL CT2909 Manual de usuario

Neilsen

Neilsen NAH-A30B Manual de usuario

Neilsen

Neilsen CT4852 Manual de usuario

Neilsen

Neilsen CT1535 Manual de usuario

Neilsen

Neilsen CT0729 Instrucciones de operación

Neilsen

Neilsen CT1533 Manual de usuario

Neilsen

Neilsen CT3073 Manual de usuario

Neilsen

Neilsen VAG CT5467 Manual de usuario

Neilsen

Neilsen CT2102 Manual de usuario

Manuales populares de Herramientas de otras marcas

Martor

Martor SECUNORM 175 Manual de usuario

ERKCO

ERKCO 1000 Manual de usuario

jbc

jbc N4473 Manual de usuario

FEINMETALL

FEINMETALL FZWZ-SET-001 Manual de usuario

Worx Professional

Worx Professional Sonicrafter WU676 Manual de usuario

Gage Bilt

Gage Bilt GB713SH Manual de usuario

Hilti

Hilti DX 9-ENP Manual de usuario

norbar

norbar NORTRONIC 34399 Manual de usuario

BGS technic

BGS technic 8578 Manual de usuario

Makita

Makita DHR241 Manual de usuario

Motor Guard

Motor Guard JMB-1250 Manual de usuario

Power Adhesives

Power Adhesives 805-12 Manual de usuario

Clemco

Clemco 24189 Manual de usuario

VVG

VVG VNG 903 Series Manual de usuario

Hilti

Hilti FX 3-A Manual de usuario

Grizzly

Grizzly H6472 Manual de usuario

axing

axing BWZ 5-02 Manual de usuario

Dh-Robotics

Dh-Robotics RGI-100 Cómo utilizar