NEC Univerge SV9100 Guía de instalación

SV9100 USER TRAINING

1/ Volume Key

To scroll the volume of your handset press up or down on the silver navigator dial on

your handset, located in the bottom right hand corner

-↕the listening volume when you are on speaker or have the handset lifted.

-↕the ringing volume when phone is ringing.

-When the phone is not in use, the volume key alters the contrast on the screen.

2/ External Call - Call Light flashes red.

Internal Call - Call Light flashes red & the name of the extension calling appears

3/ Making Calls

To make a call either pick up your handset or press the speaker key for hands free.

Dial 0, then the number you wish to call.

4/ Microphone Control

-Press the MIC key to turn the external microphone on or off.

-Red light above MIC indicates if the microphone is turned on or off. (It is

recommended that your microphone is always left on.)

5a/ Placing a Call on Hold

-During conversation, press the HOLD key

-The line key that the call came in on will begin a steady flash

5b/ Retrieving a Call Placed on Hold

-Pick up the handset.

-Press the flashing button.

NB: Flashing green means the call was placed on hold by your handset, red means it

was placed on hold by another handset.

6/ Transferring Calls

-Press Hold

-Dial station number (or press programmed key)

-Announce call

-Press transfer

-Hang up

7/ Message Light Cancel

-If you have a flashing message light on your handset

-Pick up the handset and dial 773

-You will hear a confirmation tone, and the light will be cancelled.

8/ Conference

-Enables you to have a three way conversation

-With a call in progress, press screen option CONF

-Place 2nd call (internal or external), once call is connected press ADD

-Press screen option BEGIN to establish three way conversation

9/ Last Number Redial

-Press Redial Key (if this is done with the handset down you can now scroll your

redial list by pressing up and down on the navigator dial)

-Dial # to dial the number or just pick up the handset.

10/ Station Camp -On

-If you have tried calling an extension and the line is busy, dial # then hang up the

handset.

-Your handset will then automatically call you back when that extension becomes

free. Once you answer the call back the system will call the extension you were

trying to contact.

11a/ Call Pick Up All Areas

-Upon hearing a ring at another extension, lift handset and dial *# to pick up the

call

11b/ Call Pick Up Direct

-Upon hearing a ring at a particular extension, lift handset, dial ** followed by

extension number of the handset that is ringing.

12/ Paging All Areas

-Lift handset, dial 7011

-Announce call

13/ Intercom

-Dial extension number, wait for ring tone, then press 1

14/ Tone Override

-When calling a busy extension

-Dial * (tone override code) to send a tone to the busy party

-Receiving party will see a red flash on their handset and will receive a tone

through their external speaker.

-The receiving party can place current call on hold and speak with 2nd party.

15/ Do Not Disturb

Set

-Dial 747 followed by 3

-DND ALL will be displayed on your phone

Cancel

-Dial 747 followed by 0

16/ Speed Dial / Abbreviated Dialling

- System (000-999)

-System must be programmed from extension 101

-Press Speaker

-Dial 753

-Dial speed dial location number SYS(000-999)

-Dial telephone number

-HOLD

-Dial name of party ( Max 11 letters ) use numerical keys

-HOLD to save then Speaker to exit.

NB: Press # for a space

NB: Press CONF to delete last letter

Retrieving speed dials

-Press the Silver Navigator Dial to the Right

-Enter first letter of name

-Press up or down arrow to scroll that letter

-Once you have the number desired on the screen, pick up handset to place the

call.

-Press the Silver Navigator Dial to the Left for Redial

-Enter the position the speed dial has been stored behind (000-999)

-Pick up the handset to dial

17/ One Touch Key Programming

- To program a function key

-Dial 751

-Press the key you wish to assign

-Dial 01 to assign as a one touch key

-Enter the dialled digits

oFor an extension key enter the extension number ie 101

oFor an external number enter zero, then the number ie. 0 0411 111 111

-Press HOLD to save

-Press Speaker to exit

18/ Changing Extension Name

-Press Speaker and dial 700

-Enter the extension number of the phone you wish to change

-Enter the new name over the old using the numerical keypad.

-Press Hold to save

19/ To Change Time

-Press SPK

-Dial 728

-Dial Hour ( 2 digits in 24 hour time )

-Dial Minute ( 2 digits )

-Press SPK to exit

20/ To Retrieve Missed Call Information

If you have a picture of a telephone with an arrow in the top left corner of your screen

This is to notify you that you have missed calls to be viewed.

To retrieve

-Press screen option List

-Press screen option CID

-You can now scroll up and down through the missed calls to your handset

Once you have viewed the missed calls the icon on the screen will disappear.

21/ To Change your Ring Tones

-Press Speaker

-Dial 720

-Dial 1 for Internal ring tones; or dial 2 for external ring tones

-Dial ring tones from 1-8 to hear and select ring tones

-Press Speaker to save and exit

SV8100 VOICEMAIL TRAINING

1/ Retrieving your Voice Mail Messages

When a voice mail message is left on your phone, the LED at the top of your handset will

flash red to notify you of the message.

•Pick up handset and dial 3999 (or press assigned key)

•Enter your mailbox number

•Press the screen option LSTN to hear your messages

Your messages will now play back to you. Your screen options will now change giving you

additional features such as Next, Pause Delete. If you press the More key you will get

additional options such as Rewind and Fast Forward.

2/ Changing your Voice Mail Greeting

•Dial 3999

•Dial your extension number

•Press the screen option Greet

•Select your Greeting number –by default this is Gr1

•From here you can select one of three options

oListen to your current message

oRe Record your current message

oDelete your current message

•Once you have re recorded your current message press the screen option Done to save

your recording, then hang up.

3/ Forwarding your Phone to Voice Mail

•Pick up the handset and dial

o741 to forward your all calls Immediately

o742 to forward your calls on Busy

o743 to forward your calls on No Answer

o744 to forward your call on Busy & No Answer

•Dial 1 to Set the forward or dial 0 to cancel

•Enter the forward destination of 3999 (Voice Mail) to activate

•Hang up

Setting your VRS Message

To Record Your Message

Pick up the handset

Dial 616

Dial 7 to Re Record your message

Enter you message number from 001-100

Record message after the tone

Press # to end the recording

To Listen to Your Message

Pick up the handset

Dial 616

Dial to Listen to your message

Enter you message number from 001-100

Recording will now play back to you

Recording Your Night Voice Mail Message

Press the Night Messages Key Programmed on your Main Handset

Press the screen option Greet

Select your Greeting number –by default this is Gr1

From here you can select one of three options

LSTN - Listen to your current message

REC - Re Record your current message

DEL - Delete your current message

Once you have re recorded your current message press the screen option Done to save your

recording, then hang up.

Retrieving Your Night Messages

When a voice mail message is left after hours, the LED on your Night Messages Key will

flash red to notify you of the message.

•To retrieve that message press the flashing Night Messages Key

•Press the screen option LSTN to hear your messages

Your messages will now play back to you. Your screen options will now change giving you

additional features such as Next, Pause Delete. If you press the More key you will get

additional options such as Rewind and Fast Forward.

Otros manuales para Univerge SV9100

Tabla de contenidos

Otros manuales de Sistema telefónico de NEC

NEC

NEC SL1100 Manual de usuario

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC SL1100 Manual de usuario

NEC

NEC SL1000 Manual del propietario

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC DSX Manual de usuario

NEC

NEC Dterm I Series Manual de usuario

NEC

NEC TOPAZ Manual de usuario

NEC

NEC Xen Alpha Manual de usuario

NEC

NEC Electra Elite DSS Manual de usuario

NEC

NEC Univerge SV9100 Manual de usuario

NEC

NEC SV8300 Manual de usuario

NEC

NEC Xen Topaz Manual de usuario

NEC

NEC SL1000 Guía de instalación

NEC

NEC ELECTRA ELITE IPK II Manual

NEC

NEC ElectraElite IPK Manual de usuario

NEC

NEC DSX-40 DEMO KIT Manual de usuario

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC Univerge SV9100 Manual de usuario

NEC

NEC DSX-40 DEMO KIT Manual de usuario

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC DSX-160 Manual de usuario

NEC

NEC Univerge SV 9500 Manual de usuario

Manuales populares de Sistema telefónico de otras marcas

Teleco

Teleco Perfect Voice Tis 16 Manual de usuario

AT&T

AT&T Network Adapter 25 Manual de usuario

AVE

AVE AF902R-CE Manual de usuario

Tynetec

Tynetec Advent xt Manual de usuario

Ericsson

Ericsson DCT1800-S Manual de usuario

Alcatel

Alcatel EASY REFLEXES 4200 Manual de usuario

Panasonic

Panasonic KX-TDA50 Manual de usuario

Bticino

Bticino PABX 28D Manual de usuario

Sonifex

Sonifex Phone In 6 Manual de instrucciones

TransTel Communications

TransTel Communications TD-824i Instrucciones de montaje

Nortel

Nortel BCM50 Manual del producto

Panasonic

Panasonic KX-TS25B Manual de usuario

ASCOM

ASCOM TD 92375GB Manual del propietario

Karel

Karel MS26S Hoja de información del producto

EnGenius

EnGenius DuraFon PRO Manual de usuario

Teledat

Teledat X130 DSL Manual de usuario

SpectraLink

SpectraLink MOG400 Manual de usuario

LG-Nortel

LG-Nortel 300 Series Instrucciones de funcionamiento y seguridad