NEC MultiSync WD551 Manual de usuario

Firmware Update Procedure

by USB

Rev.1.0

2

Please read before updating firmware

This document explains the procedure to update firmware of this device by using USB storage device. For

more details about the name for the each part of this device, operations of OSD and more, please refer to

the User’s Manual.

◼Precautions

Target model : WD551

Do not turn off the main power of this device, or extract USB storage device during update.

USB port of this device does not guarantee all USB storage devices to work properly.

This device supports USB storage device formatted with FAT32 format. USB storage devices

formatted with FAT16 format or NTFS format cannot be used. If you cannot update firmware,

please check the format of the USB storage device. Refer to the computer’s instruction user’s

manual or help file on how to format a USB storage device.

The data set by OSD in this device will be initialized by updating firmware.

◼About the sign

This document uses the following signs.

Note

Mentions the information which should be noted.

Information

Mentions the additional information or a useful information.

3

Preparation for Firmware Update

1. Unzip firmware file

Unzip firmware file. There is upgrade_3686 folder.

FIRMWARE_WD551_SW_****.zip

¥FIRMWARE_WD551_SW_****

¥upgrade_3686

Information

The file name for the Firmware File will be following:

FIRMWARE

File Name（*1）

Extension

FIRMWARE

FIRMWARE_WD551_SW_****.zip

.zip

（*1）**** ：Version number

2. Copy upgrade_3686 folder to USB storage device

Store upgrade_3686 folder directly under the USB storage device.

3. Turn off the main power of this device

unzip

（Drive name of USB device）

¥upgrade_3686

4

4. Connect USB storage device with upgrade_3686 folder stored

Insert the USB storage device into USB port (SERVICE PORT) of the monitor.

Preparation for firmware update has completed.

Please move on to “Update Firmware”(→P5).

5

Update Firmware

Note

Do not turn off the main power of this device, or extract USB storage device during update.

1. Turn on the main power of this device

2. Press power button until its LED blinks

Press power button until the LED of power button start to blink and then release power button.

Firmware update starts.

.

6

3. Automatically reboot twice

After firmware update starts, the monitor reboots twice as below.

Screen 1

Screen 2

reboot

reboot

7

4. Initial Setup scree is displayed

Upon the completion of update, Initial Setup screen is displayed.

Perform the initial setup.

5. Remove USB storage device from the monitor

Firmware update has completed.

8

When failed to update firmware

When you have failed to update firmware, please check the following points.

◼Device does not operates with power on

If you turn off the main power under update failed condition, this device may not operate properly.

However, update function with USB storage device may be available, so please follow the procedure in

this document and try to update again.

◼Firmware update does not start

If this device does not operate properly, firmware update may not start.

If firmware update does not start, please contact your dealer.

Otros manuales para MultiSync WD551

2

Tabla de contenidos

Otros manuales de Monitor de NEC

NEC

NEC MultiSync LCD1810X Guía del usuario

NEC

NEC MultiSync M981 Manual de usuario

NEC

NEC MultiSync LCD1530V Manual de usuario

NEC

NEC MultiSync X464UNV-3 Manual de usuario

NEC

NEC V651-AVT Guía

NEC

NEC MultiSync P402 Manual de usuario

NEC

NEC MultiSync P402 Guía

NEC

NEC MultiSync P221W Manual de usuario

NEC

NEC LCD2470WVX - MultiSync - 24" LCD Monitor Manual

NEC

NEC NRP-60LCD1 Manual de usuario

NEC

NEC AS120-1 Manual de usuario

NEC

NEC ESERIES Manual de usuario

NEC

NEC MultiSync PA271Q Manual de usuario

NEC

NEC MultiSync X841UHD Manual de usuario

NEC

NEC MultiSync EA244WMi Guía del usuario

NEC

NEC MultiSync P750 Manual de usuario

NEC

NEC MultiSync 1740CX Guía

NEC

NEC MultiSync EA231WMi Manual de lista de piezas

NEC

NEC MultiSync InGlass Touch V Series Manual de usuario

NEC

NEC MD242C2 Manual del producto

NEC

NEC MultiSync EA191M Manual de usuario

NEC

NEC PlasmaSync 60XC10 Manual de usuario

NEC

NEC LCD2090UXI - MultiSync - 20.1" LCD Monitor Manual de usuario

NEC

NEC PlasmaSync 4205W Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación

LG

LG M1950D-PZ Manual de usuario