MuxLab 500402 Manual de usuario

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5

Tel: (514) 905-0588 Fax: (514) 905-0589

Toll Free (North America): (877) 689-5228

mail:

videoease@muxlab.com

URL:

www.muxlab.com

Specifications

Environment HDMI 1.4

Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers

supporting HDMI.

Transmission Transparent to the user

Bandwidth 225 MHz

Signals HDMI 1.4 protocol

Connectors HDMI receptacle.

Two (2) RJ45S for Cat 5e unshielded or shielded twisted pair.

Maximum Distance 480i/p: Cat5e: 150 ft (45 m) Cat6: 200 ft (60 m)

720p, 1080i: Cat5e: 150 ft (45 m)

Cat6: 200 ft (60 m)

1080p:

Cat5e: 100 ft (30 m) Cat6: 150 ft (45 m)

STP is recommended where EMI/RFI may be an issue. Usage of

patch panels is not recommended. When connected to Deep

Color equipment, the 500402 removes the Deep Color content to

support greater cable length than would normally be achieved.

RJ45 Pin Configuration

Reverse Polarity Sensitive

Use EIA/TIA 568 A or B

straight-through wiring.

RJ45 A (Video)

Pin 1 (R) Pin 2 (T)

Pin 3 (R) Pin 6 (T)

Pin 4 (R) Pin 5 (T)

Pin 7 (R) Pin 8 (T)

RJ45 B (DDC)

Pin 1 (R) Pin 2 (T)

Pin 3 (R) Pin 6 (T)

Pin 4 (R) Pin 5 (T)

Pin 7 (R) Pin 8 (T)

Cable Two (2) Cat5e/6 or better solid core twisted pair cables required

Temperature Operating: 0° to 55°C Storage: -20° to 85°C

Humidity: up to 95% non-condensing

Enclosure Metal enclosure, PVC sleeve

Dimensions 10.6” x 1.9” x 0.8” (27.0 cm x 4.8 cm x 2.0 cm)

Weight 10.8 oz. (307 g)

Compliance Regulatory: FCC, CE, RoHS

Flammability: 94V1

Warranty 2 years

Order Information 500402 HDMI Passive Extender Kit

HDMI Passive Extender Kit (500402)

Quick Installation Guide

Overview

The HDMI Passive Extender Kit (500402) allows HDMI equipment to be

connected up to 150 ft (45m) @ 1080i via two (2) Cat5e unshielded twisted pair

cables in a point-to-point configuration. The product also works with 1080p up to

150 ft (45m) via Cat6 cable. The kit comes with one (1) Transmitter and one (1)

Receiver. Applications include; commercial and residential AV systems, classroom

projector systems, digital signage, boardroom systems, collaborative PC systems,

medical information systems.

Pre-Installation Check

Identify the connectors on the Source Side and Display Side as indicated on the

product.

All manuals and user guides at all-guides.com

Installation

Verify that the distance between the HDMI Transmitter and Receiver are within

MuxLab specifications (see Specifications table).

In order to install the HDMI Passive Extender Kit, please follow the steps below:

1. Connect two (2) lengths of Cat5e (or higher) grade UTP cables to the A and B

connectors on Transmitter (identified as HDMI Passive Extender Source

Side).

2. Connect the two (2) Cat5e (or higher) grade UTP cables to the A and B

connectors of the Receiver (identified as HDMI Passive Extender Display

Side).

Note: Verify that the cables are connected straight-through (i.e. A to A,

B to B) and not inverted.

3. Connect the Transmitter directly to the HDMI video source.

4. Connect the Receiver directly to the HDMI display equipment.

5. Power on the HDMI equipment and verify the image quality.

6. The following diagram shows the final configuration.

Troubleshooting

The following tables describe some of the symptoms, probable causes and possible solutions

in respect to the installation of the HDMI Passive Extender Kit. If you still cannot diagnose

the problem, please call MuxLab Customer Technical Support at 877-689-5228 (toll-free in

North America) or (+1) 514-905-0588 (International).

Picture/

Sound Probable Cause Possible Solution

No Image Wiring Check continuity

Check correct wiring

Verify that A and B Cat5e

cables are not inverted.

No Image Synchronization Power off the source and the

display. Power on the

devices.

Flickering

Image Synchronization Check cable length

Choppy

Sound Synchronization Check cable length

Noise in

image Weak signal Check cable length

Green or

pink hue Cable Check cables and replace.

Image

Flicker when

powering up

equipment

nearby

Interference Use STP cables.

All manuals and user guides at all-guides.com

Otros manuales de Extensor de MuxLab

MuxLab

MuxLab 500733 Manual de usuario

MuxLab

MuxLab 500114 Manual de usuario

MuxLab

MuxLab 500112 Manual de usuario

MuxLab

MuxLab 500070 Manual de usuario

MuxLab

MuxLab 500140 Manual de usuario

MuxLab

MuxLab VGA Balun II Manual de usuario

MuxLab

MuxLab Pro Digital 500452 Manual de usuario

MuxLab

MuxLab 500401-WP-US Manual de usuario

MuxLab

MuxLab 500451-POE Manual de usuario

MuxLab

MuxLab 500459-100 Manual de usuario

MuxLab

MuxLab 500451 Manual de usuario

MuxLab

MuxLab 500759-TX Manual de usuario

MuxLab

MuxLab ProDigital 500485 Manual de usuario

MuxLab

MuxLab 500753 Manual de usuario

MuxLab

MuxLab 500752 Manual de usuario

MuxLab

MuxLab 500710 Manual de usuario

MuxLab

MuxLab Broadcast 500734 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

MuxLab

MuxLab 500451 Manual de usuario

MuxLab

MuxLab 500754 Manual de usuario

MuxLab

MuxLab 500772 Manual de usuario

MuxLab

MuxLab 500756 Manual de usuario

MuxLab

MuxLab 500409 Manual de usuario

MuxLab

MuxLab 500409 Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manual de usuario