Moxa Technologies NPORT 6600 series Manual de usuario

P/N: 1802066500016

*1802066500016*

NPort 6600 Series

Quick Installation Guide

Edition 8.0, August 2016

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The NPort 6600 series of serial device servers includes 8-port, 16-port,

and 32-port models for connecting larger numbers of serial devices to

Ethernet. Some applications now also require better security when

transmitting data through a network. The NPort 6600 series of device

servers use DES, 3DES, and AES data encryption to provide secure

network communication.

Package Checklist

Before Installing your NPort 6600 series secure device server, verify that

the package contains the following items:

•1 NPort 6600 device server

•CBL-RJ45M9-150: 8-pin RJ45 to DB9 male connection cable, 150 cm

•Power Cord (AC models only)

•2 rack-mount ears

•Documentation and software CD

•Quick installation guide (printed)

•Warranty card

Optional Accessories

•DK-35A: 35 mm DIN-Rail Mounting Kit

•DIN-Rail Power Supply

•NM-TX01/NM-TX01-T: Network module with one 10/100BaseTX

Ethernet port (RJ45 connector; supports cascade redundancy)

•NM-FX01-S-SC/NM-FX01-S-SC-T: Network module with one

100BaseFX single mode fiber port (SC connector; supports cascade

redundancy)

•NM-FX02-S-SC/NM-FX02-S-SC-T: Network module with two

100BaseFX single mode fiber ports (SC connectors; supports cascade

redundancy)

•NM-FX01-M-SC/NM-FX01-M-SC-T: Network module with one

100BaseFX multiode fiber port (SC connector; supports cascade

redundancy)

•NM-FX02-M-SC/NM-FX02-M-SC-T: Network module with two

100BaseFX multi-mode fiber ports (SC connectors; supports cascade

redundancy)

NOTE: Please notify your sales representative if any of the above items is

missing or damaged.

- 3 -

Hardware Introduction

Demonstrated 8 port model to be an example.

Reset Button

Press the Reset button continuously for 5 second to load factory defaults:

Use a pointed object to press the reset button. Release the button after

the Ready LED stops blinking.

RS-485 adjustable pull high/low resistor (150/1 KΩ)

The NPort 6650 has 3 DIP Switches associated with each serial port for

configuring the pull high/low resistors for RS-485 applications. The

switches are located in a recess on the bottom of the NPort 6650. To

access the switches, first remove the panel covering the recess.

Pull High

Pull Low

Terminator

1 KΩ

120 Ω

OFF

150 KΩ

–

NOTE

For RS-232 applications, all DIP Switches for the port should be

set to the OFF position.

- 4 -

Rack Mounting

Use four screws to attach the NPort 6610/6650 to a standard rack.

LED Indicators

Name

Color

Function

PWR

Red

Power is being supplied to the power input.

Ready

Red

Steady

on:

Power is on and the NPort 6600 series

is booting up.

Blinking: IP

conflict, DHCP or BOOTP server not

responding, or relay output. Check

relay output first. If still blinking, then

there is an IP conflict, or the DHCP or

BOOTP server did not respond

properly.

Green

Steady

on:

Power is on and the NPort 6600 series

is functioning normally.

Blinking:

The device server has been located by

the Administrator’s Locator function.

Off

Power is off, or power error condition exists.

Link

Orange

10 Mbps Ethernet connection.

Green

100 Mbps Ethernet connection.

Off

Ethernet cable is disconnected, or has a short.

P1-P16 Tx

Green

Serial port is transmitting data.

Off

No data is being transmitted through the serial

port

P1-P16 Rx

Orange

Serial port is receiving data..

Off

No data is being received through the serial port.

Orange

Steady

on:

Ethernet fiber connection, but port is

idle.

Blinking:

Fiber port is transmitting or receiving

data.

P1-P16

in-use

LEDs

Green

Serial port is opened by server side software.

Off

Serial port is not opened by server side software.

Alarm

Red

The relay Dout is open (exception)

Off

The relay Dout is Shorted (normal)

Module

Green

Network module is plugged in and detected

Off

No module present

LCM Display Panel

The NPort 6600 display panel will show the model name, server name,

and IP address when powered up

- 5 -

Operating the LCM Panel

There are four push buttons on the NPort 6600’s top panel for operating

the server’s LCM panel. The function of each button is described below:

Button

Action

Activates the main menu, or returns to a lower level.

∧

Scrolls up through a list of items shown on the LCM panel’s

second line.

∨

Scrolls down through a list of items shown on the LCM panel’s

second line.

SEL

Selects the option listed on the LCM panel’s second line.

Detailed LCM panel operating instructions can be found on the Document

and Software CD in the “NPort 6600 Series User’s Manual.”

NOTE

LCM display panel and push buttons only for standard temprature

model.

Hardware Installation Procedure

STEP 1: Connect the NPort 6600 device server to a suitable power source.

AC models: Connect the 100 to 240 VAC power cord to the NPort 6600’s

power input.

DC models: Connect the terminal block to a battery.

STEP 2: Connect the NPort 6600 series to a network. Use a standard

straight-through Ethernet cable to connect to a hub or switch. Use a

cross-over Ethernet cable when connecting to your computer’s Ethernet

port (e.g., when setting up or testing the NPort 6600 server).

STEP 3: Connect the NPort 6600’s serial ports to your serial devices.

Software Installation Information

NPort Search Utility

To install the NPort Search Utility, insert the NPort Document and

Software CD into your computer’s CD-ROM drive. When the NPort

Installation CD window opens, click on the Installation button, and then

follow the instructions on the screen. To view detailed information about

the NPort Search Utility, refer to the pdf version of the “NPort 6600 Series

User’s Manual,” which is located in the document directory of the CD.

PComm Lite and Console Port (19200, 8, None, 1)

MOXA’s PComm Lite software utility is also included in the Document and

Software CD of the CD-ROM. PComm Lite is often used to connect to the

NPort 6600 through its console port to configure the IP address for the

first time. Use the following serial console parameters when connecting

through the console port: 19200, 8, None, 1.

- 6 -

Pin Assignments and Cable Wiring

Pin Assignments (NPort 6610/6650)

Pin RS-232

RS-422,

4-wire RS -485

2-wire RS-485

DSR

–

RTS

TxD+

–

GND

TxD

TxD-

–

RxD

RxD+

Data+

DCD

RxD-

Data-

CTS

–

DTR

–

Pin Mapping for RS-232 Cables (NPort 6610/6650)

NPort6610/6650

Serial Device

RJ45

DB9(M)

DB9(F)

DB25(M)

DB25(F)

DSR

DTR

RTS

CTS

GND

TxD

RxD

TxD

DCD

CTS

RTS

DTR

DSR

Pin Mapping for RS-422/4W-RS-485 Cables (NPort 6650)

NPort 6650

Serial Device

RJ45

DB9(M)

DB9(F)

DB25(M)

DB25(F)

TxD+

RxD+

GND

TxD-

RxD-

RxD+

TxD+

RxD-

TxD-

Pin Mapping for 2W-RS-485 Cables (NPort 6650)

NPort 6650

Serial Device

RJ45

DB9(M)

DB9(F)

DB25(M)

DB25(F)

GND

Data+

Data-

Specifications

LAN

Ethernet Ports

10/100 Mbps (RJ45)

Protection

Built-in 1.5 KV magnetic isolation

Serial Interface

NPort 6610

NPort 6650

8, 16, or 32 RS-232 ports (8-pin RJ45)

8, 16, or 32 RS-232/422/485 ports (8-pin RJ45)

- 7 -

Signals

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422: Tx+, Tx-, Rx+, Rx-, GND

RS-485(2W): Data+, Data-, GND

RS-485(4W): Tx+, Tx-, Rx+, Rx-, GND

RS-485 Data

Direction

ADDC™ (Automatic Data Direction Control)

Serial Communication Parameters

Parity

None, Even, Odd, Space, Mark

Data bits

5, 6, 7, 8

Stop bit(s)

1, 1.5, 2

Flow control

RTS/CTS, XON/XOFF, DTR/DSR

Speed

50 bps to 921.6 Kbps

Console port

RS-232 console × 1

Memory Expansion Slot

Slot Type

SD socket (supports up to 2 GB)

Power Requirements

Power input

100 to 240 VAC, 47 to 63 Hz, 88 to 300 VDC,

±48 VDC (20 to 72 VDC, -20 to -72 VDC)

Alarm Contact

Relay output with current carrying capacity of 1A @ 24

VDC

Mechanical Specifications

Material

SECC sheet metal (1 mm)

Dimensions

(W×D×H)

480×44×195 mm (including ears)

440×44×195 mm (without ears)

Operating Temperatures

Standard Temp. Models: 0 to 55°C (32 to 131°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Storage Temperatures

Standard and Wide Temp. Models: -40 to 75°C (-40 to 167°F)

High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Regulatory Approvals

EMC

FCC Class A, CE Class A

Safety

UL, CUL, EN 60950-1

Tabla de contenidos

Otros manuales de Servidor de Moxa Technologies

Moxa Technologies

Moxa Technologies CN2500 Manual de usuario

Moxa Technologies

Moxa Technologies 5400 Manual de usuario

Moxa Technologies

Moxa Technologies NPort 6450 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort IA5150A Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5610-8-DT Manual de usuario

Moxa Technologies

Moxa Technologies NPort IA5150A Manual de usuario

Moxa Technologies

Moxa Technologies 5600 Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5100 Series Manual de usuario

Moxa Technologies

Moxa Technologies nport 5400 series Manual de usuario

Moxa Technologies

Moxa Technologies CN2510 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort W2250A-EU Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5600 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort W2004 Series Manual de usuario

Moxa Technologies

Moxa Technologies EtherDevice Manual

Moxa Technologies

Moxa Technologies NPort Manual de usuario

Moxa Technologies

Moxa Technologies CN2610 series Manual de usuario

Moxa Technologies

Moxa Technologies NPort IA5250I/5250I-T Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5100A Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort 6450 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort DE-311 Manual de usuario

Moxa Technologies

Moxa Technologies AirWorks AWK-1127 Manual de usuario

Moxa Technologies

Moxa Technologies CN2510 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort IA5150AI Manual de usuario

Moxa Technologies

Moxa Technologies NPort Server Lite DE-302 Manual

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario