Moxa Technologies NPort 6450 Series Manual de usuario

– 1 – – 2 – – 3 –

P/N: 1802064500014

*1802064500014*

NPort 6450 Series

Quick Installation Guide

Seventh Edition, August 2015

Overview

The NPort 6450 secure serial device servers provide reliable

serial-to-Ethernet connectivity for a wide range of serial devices.

The NPort 6450 supports TCP Server, TCP Client, UDP, and

Pair-Connection operation modes to ensure the compatibility of

network software. In addition, the NPort 6450 also supports

Secure TCP Server, Secure TCP Client, Secure Pair-Connection,

and Secure Real COM modes for security critical applications such

as banking, telecom, access control, and remote site

management.

Package Checklist

Before installing the NPort 6450, please verify that the package

contains the following items:

•1 NPort 6450

•Power adaptor (does not apply to T models)

•2 wallmount ears

•Quick installation guide

•Documentation and software CD

•Warranty card

Optional Accessories

•DK-35A: 35 mm DIN-rail mounting kit

•DIN-rail power supply

•CBL-RJ45M9-150: 8-pin RJ45 to male DB9 cable

•CBL-RJ45M25-150: 8-pin RJ45 to male DB25 cable

•NM-TX01: Network module with one 10/100BaseTX Ethernet

port (RJ45 connector; supports cascade redundancy and

RSTP/STP)

•NM-FX01-S-SC/NM-FX01-S-SC-T: Network module with one

100BaseFX single mode fiber port (SC connector; supports

cascade redundancy and RSTP/STP)

•NM-FX02-S-SC/NM-FX02-S-SC-T: Network module with two

100BaseFX single mode fiber ports (SC connectors; supports

cascade redundancy and RSTP/STP)

•NM-FX01-M-SC/NM-FX01-M-SC-T: Network module with one

100BaseFX multi mode fiber port (SC connector; supports

cascade redundancy and RSTP/STP)

•NM-FX02-M-SC/NM-FX02-M-SC-T: Network module with two

100BaseFX multi mode fiber ports (SC connectors; supports

cascade redundancy and RSTP/STP)

NOTE

Please notify your sales representative if any of the above

items are missing or damaged.

Hardware Introduction

NOTE

The LCD panel is only available with standard temperature

models.

Reset Button—Press the Reset button continuously for 5 sec to

load factory defaults. Use a pointed object, such as a straightened

paper clip or toothpick, to press the reset button. This will cause

the Ready LED to blink on and off. The factory defaults will be

loaded once the Ready LED stops blinking (after about 5 seconds).

At this point, you should release the reset button.

LED Indicators

Name

Color

Function

PWR

Red

Power is being supplied to the power input.

Ready

Red

Steady on:

NPort is booting up.

Blinking:

IP conflict, DHCP or BOOTP

server problem, or relay output

problem.

Green

Steady on:

Power is on and the NPort 6450

is functioning normally.

Blinking:

NPort is responding to Locate

function.

Off

Power is off, or power error condition exists.

Link

Orange

10 Mbps Ethernet connection.

Green

100 Mbps Ethernet connection.

Off

Ethernet cable is disconnected, or has a

short.

P1-P4

Orange

Serial port is receiving data.

Green

Serial port is transmitting data.

Off

Serial port is idle.

Orange

Steady on:

Ethernet port is idle.

Blinking:

Fiber port is transmitting or

receiving data.

Alarm

Red

The relay output (DOUT) is open

(exception).

Off

The relay output (DOUT) is shorted (normal

condition).

Module

Green

A network module has been detected.

Off

No network module is present.

Adjustable pull high/low resistor for RS-422/485

(150 KΩor 1 KΩ)

Jumpers are used to set

the pull high/low resistors.

The default is 150 KΩ.

Short the jumpers to set

this value to 1 KΩ. Do not

use the KΩ setting with

232 mode, since doing

so will degrade the RS

232

signals and shorten the

communication distance.

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Hardware Installation Procedure

STEP 1: Connect the 12-48 VDC power adaptor to the NPort 6450

and then plug the power adaptor into a DC outlet.

STEP 2: For first-time configuration, use a cross-over Ethernet

cable to connect the NPort 6450 directly to your computer’s

Ethernet cable. For connecting to a network, use a standard

straight-through Ethernet cable to connect to a hub or switch.

STEP 3: Connect the NPort 6450’s serial port(s) to serial

device(s).

Placement Options

The NPort 6450 can be placed flat on a desktop or other horizontal

surface. In addition, you may use the DIN-Rail or Wall Mount

options, as illustrated below.

Wallmount

DIN Rail

Software Installation Information

The Document & Software CD contains the User’s Manual, NPort

Search Utility, and the PComm Lite Suite. Insert the CD and follow

the on-screen instructions. Please refer to the User’s Manual for

additional details on using the NPort Search Utility and PComm

Lite.

Pin Assignments and Cable Wiring

RS-232/422/485 Pin Assignments (male DB9)

Pin RS-232

RS-422

4W-RS-485

2W-RS-485

DCD

TxD-(A)

–

RXD

TxD+(B)

–

TXD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Specifications

LAN

Ethernet

10/100 Mbps, RJ45

Protection

Built-in 1.5 KV magnetic isolation

Optical Fiber (for fiber port modules)

Distance

Multi mode:

0 to 2 km, 1310 nm (62.5/125 μm, 500 MHz*km)

Single mode:

0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km)

Min. TX Output

Multi mode: -20 dBm; Single mode: -5 dBm

Max. TX Output

Multi mode: -10 dBm; Single mode: 0 dBm

Sensitivity

Multi mode: -34 to -30 dBm,

Single mode: -36 to -32 dBm

Serial

Interfaces

RS-232/422/485 (male DB9)

No. of Ports

Serial Communication Parameters

Parity

None, Even, Odd, Space, Mark

Data Bits

5, 6, 7, 8

Stop Bit(s)

1, 1.5, 2

Flow Control

RTS/CTS, XON/XOFF, DTR/DSR

Speed

50 bps to 921.6 kbps

Additional Features

Console Port

RS-232 (see the user’s manual for detailed

operating instructions)

Memory

One SD socket

Software Features

Protocols

ICMP, IPv4/v6, TCP, UDP, DHCP, BOOTP, Telnet,

DNS, SNMP, DDNS, HTTP, SMTP, HTTPS, SSL,

SSH, PPPoE

Utilities

Windows utility for Windows 98, ME, NT, 2000,

XP, 2003, Vista, 8, XP x64, 2003

x64, Vista x64,

2012 x64

Security

DES/3DES/AES

OS Driver

Support

Real COM drivers:

Windows 95, 98, ME, NT, 2000, XP, XP

x64, 2003,

2003 x64, Vista, Vista x64

Real TTY drivers: Linux 2.4, 2.6, and 3.x

Fixed TTY drivers: SCO Unix, SCO OpenServer 5,

OpenServer 6, UnixWare 7, UnixWare 2.1,

SVR4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD 5,

FreeBSD 6

Configuration

Web Console, Serial/Telnet Console, Windows

utility

Power Requirements

Power Input

12 to 48 VDC

Mechanical Specifications

Material

SECC sheet metal (1 mm)

Environmental Limits

Operating

Temperature

NPort 6450: 0 to 50°C (32 to 122°F)

NPort 6450-T: -40 to 75°C (-40 to 167°F)

Storage

Temperature

NPort 6450: 0 to 55°C (32 to 131°F)

NPort 6450-T: -20 to 75°C (-4 to 167°F)

Regulatory Approvals

EMC

FCC Class A, CE Class A

Safety

UL, CUL, TUV

Otros manuales para NPort 6450 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de Moxa Technologies

Moxa Technologies

Moxa Technologies NPORT 6600 series Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5600 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort Server Lite DE-302 Manual

Moxa Technologies

Moxa Technologies MIINEPORT E1 Manual de usuario

Moxa Technologies

Moxa Technologies NPort S9000 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5200 Series Manual de usuario

Moxa Technologies

Moxa Technologies MiiNePort E1-SDK Manual de usuario

Moxa Technologies

Moxa Technologies NPort IA5250I/5250I-T Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort IA5000A-I/O series Manual de usuario

Moxa Technologies

Moxa Technologies NPort IA5150A Manual de usuario

Moxa Technologies

Moxa Technologies NPort 6600 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5200 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort W2250 Manual de usuario

Moxa Technologies

Moxa Technologies NPort W2250A Manual de usuario

Moxa Technologies

Moxa Technologies NPort W2150A Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5210 Manual de usuario

Moxa Technologies

Moxa Technologies NPort W2250A-T-EU Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5200 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort IA5150AI Manual de usuario

Moxa Technologies

Moxa Technologies EtherDevice Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5200 Serie Manual de usuario

Moxa Technologies

Moxa Technologies NPort W2250 Plus Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort 6450 Series Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario