Moxa Technologies MGate MB3180 Manual de usuario

— 1 — — 2 — — 3 —

MGate MB3180

Quick Installation Guide

Third Edition, June 2008

1. Overview

The MGate MB 3180 is a 1-port Modbus gateway that converts between

Modbus TCP and Modbus ASCII/RTU protocols. It can be used to allow

Ethernet masters to control serial slaves, or to allow serial masters to

control Ethernet slaves. Up to 16 TCP masters and 31 serial slaves can be

connected simultaneously.

2. Package Checklist

Before installing the MGate MB 3180 Modbus gateway, verify that the

package contains the following items:

y1 MGate MB3180 Modbus gateway

y4 stick-on pads

yDocument & Software CD

yMGate MB 3180 Quick Installation Guide

yProduct Warranty Statement

yPower adapter

Optional Accessory

yDK-35A: DIN-rail mounting kit (35 mm)

Notify your sales representative if any of the above items is missing or

damaged.

3. Hardware Introduction

As shown in the following figures, the MGate MB 3180 has one DB9

male port for transmitting serial data.

weiVle

naPpoT

liaR-NID

elohwercs

tnuomllaW

elohwercs

troplaires9BDelaM

wei

lenaPtnorF

troptenrehtEM001/0154JR

nottubteseR

tupnirewoP

weiVlenaPrae

pno

itS

Reset Button—

The reset button is used to load factory defaults. Using a pointed object

such as a straightened paper clip to hold the reset button down for five

seconds. Release the reset button when the Ready LED stops blinking in

order to load the factory defaults.

LED Indicators—Three LED indicators are located on the top panel:

Name Color Function

On: Power is on and the unit is booting

Red Blinking: IP conflict exists, or DHCP or

BOOTP server is not responding

properly.

On: Power is on and the unit is

functioning normally

Green Blinking: Unit has been found by the Location

command in MGate Manager.

Ready

Off Power is off or power error condition exists

Orange 10 Mbps Ethernet connection

Green 100 Mbps Ethernet connection

Link

Off Ethernet cable is disconnected or has a short

Orange Unit is receiving data from device.

Green Unit is transmitting data to device.

Tx/Rx

Off No data is being exchanged with device.

4. Hardware Installation Procedure

STEP 1: After unpacking the MGate MB 3180, connect the power

adaptor.

STEP 2: Use a standard straight-through Ethernet cable to connect the

MGate MB 3180 to a network hub or switch. Use a cross-over

Ethernet cable if you are connecting the gateway directly to a

PC.

STEP 3: Connect your device to the MGate MB3180’s serial port.

STEP 4: Place or mount the MGate MB3180. The unit may be placed

on a horizontal serface such as a desktop, mounted on a

DIN-rail, or mounted on the wall.

Wall Mounting DIN-rail Mounting

P/N: 1802031800010

— 4 — — 5 — — 6 —

Adjustable Pull High/Low Resistors for the RS-485 Port

In some critical RS-485 environments, you may need to add termination

resistors to prevent the reflection of serial signals. When using

termination resistors, it is important to set the pull high/low resistors

correctly so that the electrical signal is not corrupted. Jumpers JP3 and

JP4 are used to set the pull high/low resistor values for the serial port. To

Set the pull high/low resistors to 150 KΩ, which is the factory default

setting, leave the two jumpers open. To set the pull high/low resistors to 1

KΩ, use the jumper caps to short the two jumpers.

MGate MB 3180 Jumpers

PJ,3

5. Software Installation

To install MGate Manager, insert the MGate Document & Software

CD into your PC’s CD-ROM drive. Locate and run the setup program,

which will be named MGM_Setup_[Version]_Build_[DateTime].exe

(e.g., MGM_Setup_Ver1.1.0_Build_07041910.exe) and follow the

on-screen instructions.

For more information about MGate Manager, please refer to the MGate

MB3000 User’s Manual.

6. Pin Assignments

Ethernet Port (RJ45)

Pin Signals

1 Tx+

2 Tx-

3 Rx+

6 Rx-

Serial Port (Male DB9)

987

Pin RS-232 RS-422/485 (4W) RS-485 (2W)

1 DCD TxD-(A) ---

2 RxD TxD+(B) ---

3 TxD RxD+(B) Data+(B)

4 DTR RxD-(A) Data-(A)

5 GND GND GND

6 DSR --- ---

7 RTS --- ---

8 CTS --- ---

9 --- --- ---

7. Environmental Specifications

Power Requirements

Power Input 12 to 48 VDC

Power Consumption 200 mA@12 VDC, 60 mA@48 VDC

Operating Temperature 0 to 55°C (32 to 131°F)

Operating Humidity 5 to 95% RH

Dimensions (W x D x H) 75.2 x 80 x 22 mm ←including ears

(2.96 x 3.15 x 0.87 in)

52 x 80 x 22 mm ←without ears

(2.05 x 3.15 x 0.89 in)

Surge Protection 15 KV ESD for serial port

Magnetic Isolation 1.5 KV for Ethernet

Power Line Protection 4 KV burst (EFT), EN61000-4-4

2 KV surge, EN61000-4-5

Regulatory Approvals FCC Class A, CE Class A, UL , CUL, TUV

Click here for online support:

www.moxa.com/support

The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)

Europe: +49-89-3 70 03 99-0

Asia-Pacific: +886-2-8919-1230

China: +86-21-5258-9955 (toll-free: 800-820-5036)

Reproduction without permission is prohibited.

Otros manuales para MGate MB3180

Otros manuales de Puerta de Moxa Technologies

Moxa Technologies

Moxa Technologies NPort Z3150 Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5600-8-DTL Series Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN-T Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5102-PBM-PN Manual de usuario

Moxa Technologies

Moxa Technologies AIG-100 Series Manual de usuario

Moxa Technologies

Moxa Technologies OnCell G3100 Series Manual de usuario

Moxa Technologies

Moxa Technologies MGate MB3170 Manual de usuario

Moxa Technologies

Moxa Technologies MGate MB3270 Manual de usuario

Moxa Technologies

Moxa Technologies NPort Z3150 Manual de usuario

Moxa Technologies

Moxa Technologies MRC-1002 Series Manual de usuario

Moxa Technologies

Moxa Technologies MGate MB3280 Manual de usuario

Moxa Technologies

Moxa Technologies MGate W5108 series Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP Manual de usuario

Moxa Technologies

Moxa Technologies MGate W5108 series Manual de usuario

Moxa Technologies

Moxa Technologies MGate MB3180 Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5105-MB-EIP-T Manual de usuario

Moxa Technologies

Moxa Technologies MGate 4101-MB-PBS-T Manual de usuario

Moxa Technologies

Moxa Technologies MGate MB3180 Manual de usuario

Moxa Technologies

Moxa Technologies NPort 4511 Manual de usuario

Moxa Technologies

Moxa Technologies AIG-500 Series Instrucciones de uso

Moxa Technologies

Moxa Technologies MGate 5119 Series Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5103 Manual de usuario

Moxa Technologies

Moxa Technologies OnCell G3100 Series Manual de usuario

Moxa Technologies

Moxa Technologies MGate 5121 Series Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario