Molex 207129 Series Manual de usuario

Hand Crimp Tool for Board-In Crimp Terminals

Doc No: ATS-6382784HM Release Date: 07-22-15 UNCONTROLLED COPY Page 1 of 6

Revision: A Revision Date: 07-22-15

Application Tooling

Specification Sheet

Modular Crimp Head

Order No. 63827-8470

Hand Crimp Tool

Order No. 63827-8400

FEATURES

A full cycle ratcheting hand tool ensures complete crimps

Ergonomically designed soft handles

Precisely designed crimping profiles with simple contact positioning

Easy handling due to outstanding force ratio

Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,

accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).

Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63816-0250 (220 V),

accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).

SCOPE

Products: Board-In Crimp Terminals, 22-26 AWG.

Terminal Series No.

Terminal Order No.

Wire Size

Insulation Diameter (Max.)

►Strip Length

AWG

mm²

In.

90198

90198-0001

22-26

1.52

.060

1.70-2.10

.067-.083

Terminal will accommodate the following wire specification:

22 AWG-Solid Wire or Fused Wire

24-26 AWG Solid Wire, Fused Wire or Stranded Wire

To achieve optimum IPC-A620 Class 2 insulation crimps, use this insulation OD range:

22 AWG: 1.45-1.52 mm, 24 AWG: 1.02-1.15 mm, 26 AWG: 0.90-1.05 mm

►Strip Length

Check the insulation to ensure that there has been a nice clean cut. Wires with damaged insulation should not be

used. See Figure 1.

TYPE 4A

Burred or Charred

Cut

Split

Insulation

Whiskers

REJECT

STRIP

LENGTH

Figure 1

Hand Crimp Tool for Board-In Crimp Terminals

Doc No: ATS-6382784HM Release Date: 07-22-15 UNCONTROLLED COPY Page 2 of 6

Revision: A Revision Date: 07-22-15

“A”

“B”

“CRIMP PROFILE”

INSULATION

CRIMP

Figure 2

22 AWG: 1.23-1.30 mm

24-26 AWG: 1.17-1.25 mm

Diameter PC Board Hole

WIRE

CONDUCTOR

CRIMP

1.57 0.20 mm

Thick PC Board

Section B-B

DEFINITION OF TERMS

CRIMP SPECIFICATIONS

After crimping, the conductor profiles should measure the following (See Figure 2).

Terminal Series No.

Wire Size

“A” Crimp Height (Ref.)

“B” Diagonal Dim.

Maximum

♦Pull Force

Minimum

AWG

mm2

In.

Lb.

90198

0.89

.035

1.19

.047

35.6

8.0

0.79

.031

1.14

.045

22.2

5.0

0.74

.029

1.14

.045

13.3

3.0

Terminal Series No.

Wire Size

Insulation Crimp Height (Ref.)

Insulation Crimp Width (Ref.)

Profile

AWG

mm2

In.

90198

1.65

.065

1.75

.069

1.55

.061

1.55

.061

1.50

.059

1.55

.061

♦The crimp on this terminal is not an electrical crimp; the final soldering

operation is the electrical connection. This minimum pull force is what

should be expected when pulling the terminal with both insulation and

conductor crimped.

Tool Qualification Notes:

1.Pull Force should be measured with no influence from the insulation crimp.

2.The above specifications are guidelines to an optimum crimp.

Notes:

1. This tool should only be used for the terminals and wire gauges specified on this sheet.

2. This tool is not adjustable for crimp height. Variations in tools, terminals, wire stranding, and insulation types

may affect crimp height.

3. Molex does not repair hand tools (see Warranty on page 4). The replacement parts listed are the only parts

available for repair. If the handles or crimp tooling is damaged or worn, a new tool must be purchased.

4. Pull force should be used as the final criteria for an acceptable crimp. Refer to Molex Quality Crimping

Handbook 63800-0029 for additional information on crimping and crimp testing.

5. Molex does not certify crimp hand tools.

Hand Crimp Tool for Board-In Crimp Terminals

Doc No: ATS-6382784HM Release Date: 07-22-15 UNCONTROLLED COPY Page 3 of 6

Revision: A Revision Date: 07-22-15

OPERATION

Open the tool by squeezing the handles together, at the end of the closing

stroke, the ratchet mechanism will release the handles, and the hand tool will

spring open.

Preparing Terminals for Crimping

The terminals must be cut from the reel as shown. See Figure 3. The carrier strip hole is used to assist in loading

the terminal in position over the crimp anvils. The carrier strip will help maintain terminal position during crimping

and can be broken off after the crimp is complete.

Crimping Terminals

1. Load the terminal with carrier strip into the proper crimp profile. Make sure the carrier strip pilot hole fits over the

positioning pin.

2. Place the properly stripped wire into the correct profile and above the terminal. Pull the wire up; make sure all the

wire strands are captured inside the insulation stop/slot. Push the wire into the tool until the end of the insulation

contacts the insulation stop. See Figures 4 and 5.

3. While holding the wire with one hand, slowly squeeze the tool handles together to close the tool jaws until the

ratchet mechanism releases. At this point the handles can be released and will spring open.

4. Remove the crimped terminal and inspect for acceptable crimp attributes.

Note: The tamper proof ratchet action will not release the tool until it has been fully closed.

Maintenance

It is recommended that each operator of the tool be made aware of, and responsible for, the following

maintenance steps:

1. Remove dust, moisture, and other contaminants with a clean brush, or soft, lint free cloth.

2. Do not use any abrasive materials that could damage the tool.

3. Make certain all pins; pivot points and bearing surfaces are protected with a thin coat of high quality machine

oil. Do not oil excessively. The tool was engineered for durability but like any other equipment it needs

cleaning and lubrication for a maximum service life of trouble free crimping. Light oil (such as 30 weight

automotive oil) used at the oil points, every 5,000 crimps or 3 months, will significantly enhance the tool life.

Figure 3

LOCATOR

Figure 4

TERMINAL

CARRIER STRIP

POSITIONING

TERMINAL

NAL

WIRE

INSULATION

PUNCH

CONDUCTOR

ANVIL

INSULATION ANVIL

Figure 5

CONDUCTOR

PUNCH

LOCATOR

INSULATION

STOP

Hand Crimp Tool for Board-In Crimp Terminals

Doc No: ATS-6382784HM Release Date: 07-22-15 UNCONTROLLED COPY Page 4 of 6

Revision: A Revision Date: 07-22-15

4. Wipe excess oil from hand tool, particularly from crimping area. Oil transferred from the crimping area onto

certain terminations may affect the electrical characteristics of an application.

5. When tool is not in use, keep the handles closed to prevent objects from becoming lodged in the crimping dies,

and store the tool in a clean, dry area.

Miscrimps or Jams

Should this tool ever become stuck or jammed in a partially closed position, Do Not force the handles open or

closed. The tool will open easily by lifting the ratchet release lever. See Figure 9.

Warranty

This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital

components are long life tested. All tools are warranted to be free of manufacturing defects for a period of 30

days. Should such a defect occur, we will repair or exchange the tool free of charge. This repair or exchange will

not be applicable to altered, misused, or damaged tools. This tool is designed for hand use only. Any clamping,

fixturing, or use of handle extensions voids this warranty.

CAUTION: Repetitive use of this tool should be avoided.

CAUTIONS:

1. Manually powered hand tools are intended for low volume or field repair. This tool is NOT intended for

production use. Repetitive use of this tool should be avoided.

2. Insulated rubber handles are not protection against electrical shock.

3. Wear eye protection at all times.

4. Use only the Molex terminals specified for crimping with this tool.

CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.

Applications for the Modular Crimp Head

WARNING: NEVER operate, service, install, or adjust this Modular Crimp Head without proper instruction and

without first reading and understanding the instructions in the proper Manual or Specification Sheet. See Chart

below for the correct Manual or Specification Sheet.

WARNING: NEVER install tooling or service this tool while it is into any power source. Disconnect the power

by unplugging or turn off the Actuator from its power source.

CAUTION: Keep fingers away from the crimping area when operating this tool. It may cause severe injury.

CAUTION: Wear safety glasses when operating or serving this tool.

The chart below shows all applications for this Modular Crimp Head.

Hand Crimp Tool for Board-In Crimp Terminals

Doc No: ATS-6382784HM Release Date: 07-22-15 UNCONTROLLED COPY Page 5 of 6

Revision: A Revision Date: 07-22-15

MODULAR

CRIMP

HEAD

BATTERY

POWER

CRIMP

ADAPTER

LOCKING

PINS

LOCKING PINS

BATTERY

POWERED

TOOL

AIR

POWER

TOOL

MODULAR

CRIMP HEAD

LOCKING

PINS

LOCKING

PINS

AIR POWER

CRIMP

ADAPTER

Modular Crimp Head

Order No.

Tool

Order no.

Tool

Description

Adapter

Order No.

Adapter

Description

Figure

No.

63827-8470

63816-0000

Hand Crimp Frame (Short)

N/A

63816-0050

Hand Crimp Frame (Long)

N/A

63816-0200

Battery Power Tool (110 V)

63816-0600

Battery Power Crimp Adapter

63816-0250

Battery Power Tool (220 V)

63816-0600

Battery Power Crimp Adapter

63816-0100

Air Power Tool

63816-0700

Air Power Crimp Adapter

Applications for the Modular Crimp Head

Hand Crimp Tool

Battery Powered Tool

Air Powered Tool

Figure 6

Figure 7

Figure 8

MODULAR

CRIMP

HEAD

LOCKING

PINS

HAND CRIMP

FRAME LONG

OR SHORT

Hand Crimp Tool for Board-In Crimp Terminals

Doc No: ATS-6382784HM Release Date: 07-22-15 UNCONTROLLED COPY Page 6 of 6

Revision: A Revision Date: 07-22-15

RATCHET

RELEASE LEVER

HANDLE

SPRING

CRIMPING

SPRING (2)

Figure 9

(2)

M4 X 12mm

LONG BHCS

M4 X 8mm

LONG BHCS

PARTS LIST

Item

Order Number

Description

Quantity

63827-8470

Modular Crimp Head

1 (Ref)

63816-0000

Hand Crimp Frame (Short)

1 (Ref)

63827-8475

Locator Plate

63816-0001

Locking Pin

63600-0525

Handle Spring

63600-0520

Crimping Spring

Visit our Web site at http://www.molex.com

Otros manuales para 207129 Series

100

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Herramientas de crimpado de molex

molex

molex 5050731100 Manual de usuario

molex

molex 63823-6370 Manual de usuario

molex

molex 11-01-0101 Manual de usuario

molex

molex 207129 Series Guía del usuario

molex

molex 207129 Series Manual de usuario

molex

molex 50098 Series Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 63811-5600 Manual de usuario

molex

molex 63825-8100 Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 63819-3500 Manual de usuario

molex

molex 43178 Series Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 63827-6070 Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex CR5974 Manual de usuario

molex

molex 63823-4100 Manual de usuario

molex

molex HCS-125 Series Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 63828-0600 Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 57022 Series Manual de usuario

Manuales populares de Herramientas de crimpado de otras marcas

Panduit

Panduit CT-1000 Guía del administrador

JST

JST CS 10 Manual de usuario

Danfoss

Danfoss ET4200 Manual de usuario

Tyco Electronics

Tyco Electronics PRO-CRIMPER III Manual de usuario

TE Connectivity

TE Connectivity 2063528-1 Manual de usuario

Tyco Electronics

Tyco Electronics 69156-1 Manual de usuario

CRH

CRH CRL CBLHCT1 Manual de usuario

Emerson

Emerson Klauke ES 105CFM Manual de usuario

KIMBALL MIDWEST

KIMBALL MIDWEST 27-798 Manual de instrucciones

Danfoss

Danfoss ET4350 Manual de usuario

Milwaukee

Milwaukee M18 Manual de usuario

HOGERT

HOGERT HT1P169 Manual de usuario

Textron

Textron ESG105L Manual de usuario

Tyco Electronics

Tyco Electronics 90035-3 Manual de usuario

Emerson

Emerson Klauke ES 20RMCCFB Manual de usuario

Continental Refrigerator

Continental Refrigerator PC150HD Manual de usuario

TE Connectivity

TE Connectivity ERGOCRIMP 1-1579001-3 Manual de usuario

Tyco Electronics

Tyco Electronics CERTI-CRIMP 90418-1 Manual de usuario