Microtek ArtixScanDI 2015c Manual de usuario
www.microtek.com
ArtixScanDI 2015c
User's Manual
Document Imaging
Scanner
2 ArtixScan DI 2015c User's Manual
Preface
Copyright
Copyright © 2017, Microtek International, Inc., all rights reserved. This document
may not be reproduced or copied in any way, stored electronically, or translated
into any language, without the permission of Microtek International, Inc.
Trademarks
Microtek, ScanMaker, ArtixScan, ScanWizard and ColoRescue are trademarks
or registered trademarks of Microtek International, Inc. All other trademarks or
registered trademarks are the property of their respective holders. Specications,
software and hardware bundles are subject to change without notice. Not
responsible for typographical errors.
Disclaimer
The contents of this manual have been checked carefully for accuracy, and every
effort has been made to ensure that there are no errors. However, Microtek
makes no guarantee as to the accuracy of the contents of this document and
reserves the right to make changes to the contents without prior warning.
I49-005039 B
January 2017
Microtek International, Inc.
No. 6, Industry East Road 3, Science Based Industrial Park, Hsinchu, 30075, Taiwan
Tel: 886-3-5772155, Fax: 886-3-5772598, http://www.microtek.com
ArtixScan DI 2015c User's Manual 3
FCC Compliance Statement
This equipment (Model: MRS-600U2ADF) has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: A shielded Hi-Speed USB interface cable with ferrite core installed on the
scanner connector end must be used with this equipment.
Caution: Changes or modications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
4 ArtixScan DI 2015c User's Manual
Safety Precautions
Before using your scanner, read the following safety guides carefully, which
detail the proper operation of the scanner and its accessories to prevent injuries
or damage to users or equipment.
Power Source and AC Power Cord:
• Use a power source only with a power rating specied on the marking label.
• Insert the plug completely into the outlet, as a loose connection may cause
arcing and result in re.
• Place and route the power supply cord such that it is not likely to be walked
on or pinched by items placed upon or against them, paying particular
attention to the cord near the power plugs, convenience receptacles, and at
the point where it exits from the outlet.
• When the scanner is left unattended and unused for long periods of time,
unplug it from the wall outlet.
Moving and Storing the Scanner:
• Always lock the scanner when shipping or moving the scanner. Quick stops,
excessive force, and uneven surfaces may cause the product to overturn
when moving.
• When locking or unlocking the scanner back, do not turn the scanner upside
down.
• Do not place the scanner on any slippery, slanted, or unstable surface. The
product may slide or fall, causing serious injury to people as well as serious
damage to the product.
• Do not use this scanner near water. Never spill liquid of any kinds on the
product, or it may result in electric shock or other hazards.
• This scanner should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including ampliers) that produce
heat.
Service:
• When you need a repair service, unplug the scanner from the power outlet
and consult qualied service personnel.
• When replacement parts are required, use replacement parts that are
specied by the manufacturer or have the same characteristics as the
original parts.
ArtixScan DI 2015c User's Manual 5
Table of Contents
Preface ................................................................................................2
FCC Compliance Statement ................................................................3
Safety Precautions ..............................................................................4
Knowing aboutYour Scanner...............................................................7
Features of the ArtixScan DI 2015c .................................................... 7
Installation Requirements ................................................................... 8
Taking a Closer Look ......................................................................... 9
Top/Rear/Side View..................................................................... 9
Front/Open View....................................................................... 10
Initial Setup ....................................................................................... 11
Step 1: Unpacking Package Contents ................................................ 11
Step 2: Installing the Software.......................................................... 12
Step 3: Unlocking the Scanner.......................................................... 13
Step 4: Connecting the Scanner........................................................ 13
To the ADF .............................................................................. 13
To the Power Adapter ............................................................... 13
To the Hi-Speed USB Cable ........................................................ 14
Positioning Documents .....................................................................15
Into the ADF (Automatic Document Feeder)........................................ 15
On the Flatbed................................................................................ 17
Scanning Scenarios ...........................................................................18
Using ScanWizard DI ....................................................................... 18
Scanning Documents................................................................. 18
Scanning Documents with Barcodes ............................................ 22
Scanning Documents by Software Duplex Scan Function ............... 24
Scanning Documents from an Application .................................... 27
Utilizing Scanned Documents ...........................................................28
Scanning for OCR ........................................................................... 28
Scanning for PDF ............................................................................ 31
Scanning for Copying ...................................................................... 32
Scanning to Cloud........................................................................... 33
Scanning as Text-to-Speech (TTS) .................................................... 34
6 ArtixScan DI 2015c User's Manual
Scanner Buttons ................................................................................36
Starting Up Scanner Button Settings Interface ................................... 37
Customizing the Scanner Buttons...................................................... 38
How the Scanner Button Works ....................................................... 39
Care and Cleaning .............................................................................40
Cleaning the Scanner Glass Surfaces ................................................. 40
Cleaning the Rollers......................................................................... 41
Maintenance ......................................................................................42
Replacing the Rubber Pad................................................................. 42
Appendix ...........................................................................................43
Fixing Paper Jams ........................................................................... 43
Troubleshooting .............................................................................. 44
Specications ................................................................................. 45
ArtixScan DI 2015c User's Manual 7
Knowing aboutYour Scanner
The ArtixScan DI 2015c is a color document scanner with an built-in Automatic
Document Feeder (ADF) that can hold up to 50 sheets of papers for the
unattended volume scanning. It features 600 x 1200-dpi optical resolution, and
has a throughput run of about 15 pages per minute in color.
Features of the ArtixScan DI 2015c
The ArtixScan DI 2015c comes with several important features, including the
following:
• Included Automatic Document Feeder (ADF) — The high-capacity Automatic
Document Feeder (ADF) for the ArtixScan DI 2015c holds up to 50 sheets,
supporting dimensions from 4.14" x 5.83" (105 mm x 148 mm) to 8.5" x
25" (215.9 mm x 635 mm).
• Hi-Speed USB port — Hi-Speed USB is capable of data transfer rates of up
to 480MB/sec. Hi-Speed USB is backward compatible with the original USB
standard, providing the high/low data transfer rate via the included Hi-Speed
USB cable.
• Three programmable function buttons — The programmable function buttons
on the front panel of the scanner provide you an intuitive and easy way to
access scanner functions.
• New and Advanced Microtek ScanWizard DI software — ScanWizard DI
offers a host of features and image adjustment controls for scanning. Its
distinctive features include:
– Software duplex scan function — With this feature, ScanWizard DI
enables simplex scanners to scan both sides of a document in one
simple click. It efciently upgrades your present simplex scanner to a
duplex scanner, saving a lot of effort and money.
– Text Orientation Recognition — With this feature, the scanner
automatically rotates every saved les in a readable direction based on a
specic OCR language selected.
– Remove Blank Page — With this feature, blank pages are automatically
detected and removed by the software when scanning a stack of
documents. This function is quite helpful especially when users are
scanning double-sided documents and some of the pages only have text
on the front side.
– Remove Punch Hole — With this feature, the software automatically
detects the location of the punch holes on the scanned documents and
lls them in color. This function works for most common hole puncher
standards.
8 ArtixScan DI 2015c User's Manual
– Save multiple images as a single le — This advanced feature allows
user to save multiple scanned images as a single le, depending on the
number of the scanned images that are dened for document archival.
– Auto-crop and auto-deskew — The auto-crop function automatically
detects the size of the original image, crops the full scan frame to t the
image, and removes unwanted black borders. The auto-deskew function
automatically corrects distorted images for proper alignment.
Installation Requirements
In order to use your ArtixScan DI 2015c, your computer must satisfy the
following system requirements:
• CD/DVD-ROM drive (for installing software)
• Color display with 24-bit color output capability
• 512 MB RAM or more
• Pentium IV PC or higher with USB or Hi-Speed USB (USB 2.0) port
• Microsoft Windows XP/7/8/10
ArtixScan DI 2015c User's Manual 9
No. Names of Parts Functions of Parts
1 Tray Flap Used to open the feed tray to load documents.
2 Guide Arm Slides to hold a stack of documents.
3 Document Output Tray Stores a stack of documents which have been scanned.
4 Tray Extender Used to extend the length of the Document Feed Tray.
5 Document Feed Tray Holds the documents to be fed into the ADF
(for the high-volume document scanning).
6 Paper Stabilizer Keeps a stack of documents neatly on the Document Feed Tray.
7 ADF Cover The cover of the Automatic Document Feeder.
8 Earlobe Lever Lifts up to open the ADF cover.
9 ADF Connector Connects the ADF to the scanner.
10 Hi-Speed USB Port Connects the Hi-Seed USB (USB 2.0) cable to the computer.
11 Power Connector Connects the scanner to the power adapter.
12 Power Switch Turns the scanner on or off.
Taking a Closer Look
Top/Rear/Side View
10 ArtixScan DI 2015c User's Manual
Front/Open View
No. Names of Parts Functions of Parts
1 ADF (Scan Lid) Automatic Document Feeder.
2 Scan Sensor Area Cover Used to cover the scan sensor and rollers.
3 Glass Surface For atbed scanning of a single-sheet document.
4 Horizontal Ruler Used to measure the width of a scanned document.
5 Programmable Function Buttons Allows users to customize the buttons to perform their
preferred functions via software settings. These buttons
are F1, F2, and F3.
F1 F2 F3
Otros manuales para ArtixScanDI 2015c
1
Tabla de contenidos
Otros manuales de Escáner de Microtek
Microtek
Microtek ScanMaker s380 Manual del propietario
Microtek
Microtek ArtixScan 3200XL Manual de instrucciones
Microtek
Microtek FileScan 3125c Manual de instrucciones
Microtek
Microtek ArtixScan 120tf Manual de usuario
Microtek
Microtek ScanMaker 3750i Manual de usuario
Microtek
Microtek ArtixScanDI 5230 Manual de usuario
Microtek
Microtek ObjectScan 1600 Manual de usuario
Microtek
Microtek XT3500 Manual de usuario
Microtek
Microtek ScanMaker i900 Manual
Microtek
Microtek ScanMaker 5950 Manual de usuario
Microtek
Microtek ArtixScan F1 Manual de instrucciones
Microtek
Microtek ScanMaker 4850 Manual de usuario
Microtek
Microtek ArtixScanDI 3130c Manual de usuario
Microtek
Microtek ScanMaker X12USL Manual de usuario
Microtek
Microtek XT5820 HS Manual de usuario
Microtek
Microtek ScanMaker i900 Manual de usuario
Microtek
Microtek ArtixScan DI 2125c Manual de usuario
Microtek
Microtek Bio-5000 Manual de usuario
Microtek
Microtek ScanMaker 3600 Manual de usuario
Microtek
Microtek ScanMaker 1000XL Manual de usuario
