Microtek ObjectScan 1600 Manual de usuario

www.microtek.com

User's Manual

Object Scanner

ObjectScan 1600

2 ObjectScan 1600 User's Manual

Preface

be reproduced or copied in any way, stored electronically, or translated into any

language, without the permission of Microtek International, Inc.

Trademarks

Microtek, ScanMaker, ArtixScan, ScanWizard and ColoRescue are trademarks

or registered trademarks of Microtek International, Inc. All other trademarks

or registered trademarks are the property of their respective holders.

Speciﬁcations, software and hardware bundles are subject to change without

notice. Not responsible for typographical errors.

Disclaimer

The contents of this manual have been checked carefully for accuracy, and every

effort has been made to ensure that there are no errors. However, Microtek

makes no guarantee as to the accuracy of the contents of this document and

reserves the right to make changes to the contents without prior warning.

I49-005023 B

April 2015

Microtek International, Inc.

No. 6, Industry East Road 3, Science Based Industrial Park, Hsinchu, 30075,Taiwan

Tel: 886-3-5772155, Fax: 886-3-5772598, http://www.microtek.com

ObjectScan 1600 User's Manual 3

Safety Precautions

Before using your scanner, read the following safety guides carefully, which

detail the proper operation of the scanner and its accessories to prevent injuries

or damage to users or equipment.

Meanings of Symbol Signs

This indicates hazardous situation which, if not paid

attention, could result injury or damage to users or

equipment.

This indicates hazardous situation which, if not paid

attention, could result serious injury or death to users.

Power Supply:

• Useapowersourceonlywithapowerratingspeciedonthemarkinglabel.

• Ensuretoturnoffthepowerofeachdevicebeforeconnectingor

disconnecting the cables.

• Inserttheplugcompletelyintotheoutlet,asalooseconnectionmaycause

arcing and result in ﬁre.

• Ensuretoholdtheplugorconnectortodisconnectthecable;otherwise,if

you pull the cable only, it may damage the core wire and result in ﬁre or

electric shock.

• Placeandroutethepowersupplycordsuchthatitisnotlikelytobewalked

on or pinched by items placed upon or against them, paying particular

attention to the cord near the power plugs, convenience receptacles, and at

the point where it exits from the outlet.

• Whenthescannerisleftunattendedandunusedforlongperiodsoftime,

unplug it from the wall outlet.

Moving and Storing the Scanner:

• Alwaysensurethatthescannerisstoredproperlybeforeshippingor

moving it. Quick stops, excessive force, and uneven surfaces may cause

the product to overturn when moving.

• Donothitordropthescanner.Thescannermaybedamagedifitreceives

a strong jolt, which may result in ﬁre or electric shock if the scanner is used

without being repaired.

• Donotplacethescanneronanyslippery,slanted,orunstablesurface.The

product may slide or fall, causing serious injury to people as well as serious

damage to the product.

CAUTION

WARNING

4 ObjectScan 1600 User's Manual

• Donotusethescannernearwater.Neverspillliquidofanykindsonthe

product, or it may result in electric shock or other hazards.

• Thisscannershouldbesituatedawayfromheatsourcessuchasradiators,

heat registers, stoves, or other products (including ampliﬁers) that produce

heat.

• Donotstorethescannerinwhichitmaybeexposedtodirectsunlight.

• Donotplacethescannerneartheedgeofatable.Whenthedrawerofthe

scanner is opened, the weight of the product may cause the scanner falling,

causing serious injury to people as well as serious damage to the product.

Using the Scanner:

• Themaximumloadingweightforupperandlowerscanbedsis5.5lbs(2.5

kg).Donotputanymaterialonscanbedsheavierthantheloadinglimit.

Maintenance and Service:

• Whenthescannerisgoingtobecleaned,ensuretoturnoffthepowerof

each device and unplug the power cable from the AC outlet.

• Whenyouneedarepairservice,unplugthescannerfromthepoweroutlet

and consult qualiﬁed service personnel.

• Whenreplacementpartsarerequired,usereplacementpartsthatare

speciﬁed by the manufacturer or have the same characteristics as the

original parts.

ObjectScan 1600 User's Manual 5

Table of Contents

Preface ................................................................................................2

Safety Precautions ..............................................................................3

Knowing about Your Scanner..............................................................7

Features of the ObjectScan 1600.....................................................................7

System Requirements ......................................................................................7

Taking a Closer Look ........................................................................................8

Front View ..................................................................................................8

Back View ...................................................................................................9

Initiate Setup.....................................................................................10

Step 1: Unpacking Package Contents............................................................10

Step 2: Installing the Software ...................................................................... 11

Step 3: Unlocking the Scanner ......................................................................12

Step 4: Installing the Upper Scan Bed ..........................................................13

Step 5: Connecting the Scanner....................................................................14

To the Power Source ...............................................................................14

To the Hi-Speed USB Cable ....................................................................14

Scanning the Materials......................................................................15

Positioning the Materials ...............................................................................15

Using ScanWizard LS (USB) Software..........................................................17

Understanding ScanWizard LS (USB) Further....................................19

Launching ScanWizard LS (USB) ..................................................................19

Exiting ScanWizard LS (USB) ........................................................................19

Familiarizing with the Main Control Panel of ScanWizard LS (USB) .........20

Select Frame Button .......................................................................................22

Magnify Button ...............................................................................................22

Rotate Counterclockwise/Clockwise Buttons................................................23

Preview Button................................................................................................23

Scan to Save Button .......................................................................................23

The Files Menu ...............................................................................................25

Save Scanning Settings ..........................................................................25

Load Scanning Settings ..........................................................................26

RestoretheDefaultSettings...................................................................27

6 ObjectScan 1600 User's Manual

The Scanner Menu .........................................................................................27

Scanner Info.............................................................................................27

The Window Menu .........................................................................................28

Open a Window .......................................................................................28

Tools Window ..........................................................................................29

AdvancedTools Window .........................................................................30

The About Menu .............................................................................................32

User's Manual..........................................................................................32

Maintenance ......................................................................................33

Appendix ...........................................................................................34

Troubleshooting..............................................................................................34

Speciﬁcations..................................................................................................35

ObjectScan 1600 User's Manual 7

Knowing about Your Scanner

The ObjectScan 1600 is a professional scanner exclusively designed for

transferring originals of samples into digital formats. It is ideal for capturing

images for small and stereoscopic objects and these images can be used in

many categories, such as collections, teaching, researching, manufacturing and

web business. At the same time, the ObjectScan 1600 is also able to scan paper

materials, for example, prints and researching papers.

Features of the ObjectScan 1600

The ObjectScan 1600 comes with several important features, including the

following:

• Non-contactscan(on-topscan)Design—TheObjectScan1600takesona

design of a non-contact scan (on-top scan) structure. Under this structure,

users have no needs to spin sample face down on the scan bed, and enjoy

the scan work without worrying about the problems that traditional ﬂatbed

scanners deal with, such as damage problem caused by directly contact

each other.The ObjectScan 1600 is perfect for digitalizing the originals of

samples.

• Energy-savingtri-waveLEDlightsource—Adoptingtri-waveLEDsasthe

light source, when the scanner is detected by the system, there are no

requirements for any warm-up time before carrying out the scan, which

boots your productivity and reduces energy costs amazingly. With its stable

performance, the image quality will remain consistent even after used for a

certain period of time.

• ColorCCDwith1600-dpihighresolution—TheObjectScan1600hasacolor

linearCCDwithresolutionthatreachesupto1,600pixelsperinch.Thus,it

can clearly capture images for shapes and textures of objects, presenting

original appearances of objects precisely and decreasing the happenings of

damages on objects when doing researches.

• MicrotekScanWizardLS(USB)software—ScanWizardLS(USB)is

software exclusively designed for scanning and saving objects' graphs. The

friendly user interface of ScanWizard LS (USB) provides users an easy and

quick access to initiate.

System Requirements

• DVD-ROM/CD-ROMdrive(forinstallingsoftware)

• Colordisplaywith24-bitcoloroutputcapability

• 4GBmemoryorabove

• IntelCorei5Processorat3.0GHzorabove

• MicrosoftWindows7orWindows8

8 ObjectScan 1600 User's Manual

Taking a Closer Look

Front View

No. Names of Parts Functions of Parts

1 Indicators Displaysthestatusofthescanner.

(Green and Orange)

2 DraweroftheScanner Carriestheupperscanbedandthelowerscanbedofthescanner.

3 HandleoftheDrawer Holdstoopenorclosethedrawerofthescanner.

4 Right Handle Holds to move the scanner.

ObjectScan 1600 User's Manual 9

Back View

No. Names of Parts Functions of Parts

1 Power Connector Connects the scanner to the power cord.

2 Hi-Speed USB Port Connects the Hi-Speed USB (USB 2.0) cable to the computer.

3 Power Button Turns the scanner on or off.

4 Left Handle Holds to move the scanner.

10 ObjectScan 1600 User's Manual

Initiate Setup

Step 1: Unpacking Package Contents

After unpacking your scanner package, please check for the major components

listed below.

Scanner

Hi-Speed USB cable

Power cord SoftwareCD/DVD

Upper scan bed

Otros manuales para ObjectScan 1600

Tabla de contenidos

Otros manuales de Escáner de Microtek

Microtek

Microtek ScanMaker 4600 Manual de usuario

Microtek

Microtek ArtixScanDI 5230 Manual de usuario

Microtek

Microtek ScanMaker i480 Manual de instrucciones

Microtek

Microtek ScanMaker i4800 Manual de usuario

Microtek

Microtek ScanMaker s430 Manual del propietario

Microtek

Microtek ArtixScan 3200XL Manual de usuario

Microtek

Microtek ArtixScan F2 Manual de instrucciones

Microtek

Microtek ScanMaker 4600 Manual de usuario

Microtek

Microtek ScanMaker 9800XL Plus Manual de usuario

Microtek

Microtek ScanMaker i800 Plus Manual de instrucciones

Microtek

Microtek ScanMaker 3880 Manual de usuario

Microtek

Microtek ScanMaker i460 Manual de instrucciones

Microtek

Microtek Bio-5050 Manual de usuario

Microtek

Microtek ScanMaker i900 Manual de usuario

Microtek

Microtek LightLid EL Manual de usuario

Microtek

Microtek ScanMaker 5700 Manual de usuario

Microtek

Microtek ScanMaker IIG Manual de usuario

Microtek

Microtek Vantas 3000 Manual de usuario

Microtek

Microtek ScanMaker s380 Manual de instrucciones

Microtek

Microtek ScanMaker V6USL Manual de usuario

Microtek

Microtek ScanMaker 3700 Manual de usuario

Microtek

Microtek ScanMaker 5950 Manual de usuario

Microtek

Microtek ArtixScan 120tf Manual de usuario

Microtek

Microtek XT3500 Manual de usuario

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

Fujitsu

Fujitsu FI-4860C2 Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Kodak

Kodak i5800 Scanner Manual de usuario

Kodak

Kodak i7300 Manual de usuario

Revopoint

Revopoint POP Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Fujitsu

Fujitsu CardMinder Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario