MicroNet SP212D Manual de usuario

Micronet

Faster and Easier Networks

User Manual

USB KVM Switch

Model No.: SP212D/SP214D

World Wide Web: www.micronet.com.tw ; www.micronet.info

Certificates

FCC

This equipment has been tested and found to comply with Part 15 of

the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received including

interference that may cause undesired operation.

This equipment is in compliance with the requirements of the

following regulations: EN 55 022: CLASS B

Contents

Certificates...................................................................... 1

Chapter 1 Introduction .................................................. 3

1.1 Overview.............................................................. 3

1.2 System Requirements.......................................... 3

1.3 Features............................................................... 4

1.4 Package Contents................................................ 5

Chapter 2 Installation.................................................... 6

2.1 Hardware Installation............................................ 6

2.2 Install KVM Switcher ............................................. 8

Chapter 3 Operation ................................................... 10

3.1 Face-panel buttons.............................................. 10

3.2 Keyboard hotkeys................................................ 11

3.2.1. User-definable hotkeys ............................... 11

3.2.2. Universal hotkey ......................................... 11

3.2.3. KVM Switcher Software............................... 12

3.3 Switch to PC x by Operation Menu...................... 13

3.3.1 Switch to PC x by Keyboard Hotkeys ........... 14

3.3.2. Start Auto-scan............................................ 15

3.3.3. Stop Auto-scan............................................ 15

3.3.4. KVM Switcher configuration......................... 15

3.4 Define Hotkey commands................................... 15

3.5 Turn On Buzzer ................................................. 16

3.6 Fix Audio Port at PC x......................................... 17

3.7 Auto Scan Period ................................................ 17

Glossary ....................................................................... 10

Chapter 1 Introduction

1.1 Overview

The SP212D/SP214D is a 2/4-port Slim Palmtop USB KVM Switch

with optional audio and microphone switching function. It allows you

to access, control, boot and reboot multiple USB-enabled computers.

The independent audio/mic switching function allows an

uninterrupted audio experience on a same connected computer even

when you switch to another computer.

For Windows and Mac platforms, it provides an innovative and easy-

to-use KVM Switcher Software -- a small windows client application

to facilitate your KVM switching operations such as PC selection and

hotkey sequence programming, auto scan, auto scan delay time

programming, independent/simultaneous audio & PC switching, etc.

1.2 System Requirements

zOperation system should be DOS, Windows 95/98/SE,

Windows ME/2000/XP, Linux, MacOS, etc

1.3 Features

z2/4-port Slim Palmtop KVM Switch with Audio&Mic and 2/4 x

detachable USB KVM & 2/4 x Audio/Mic Cables

zUSB console support for USB keyboard and mouse

zAudio and Microphone switching for uninterrupted multimedia

experience across multi-platforms.

zUSB 1.1 Specification compliant

zIndependent/simultaneous switching of both PC and audio/mic

channel

zMulti-platform support for PCs and Macintosh G3/G4 MAC,

iMAC [For port switching on Mac, you should only use the face-

panel button]

zHot-plugging PCs for maintenance without powering down the

KVM Switch or PCs

zWindows-based Switching Software client for easy switching

zUser definable hotkeys

zAdditional universal port switching hotkey – ScrollLock +

ScrollLock – for PC platform.

zChannel selection by push button, keyboard hotkeys and Win-

based Switching Software Client

zLED indicators for easy status monitoring

zHigh VGA resolution 2048 x 1536

zUSB interface power

1.4 Package Contents

SP212D

z2-port KVM Switch

zUser manual

z2 * KVM cable

zManual & Utility CD

SP214D

z4-port KVM Switch

zUser manual

z4 * KVM cable

z4 * Audio cable

zManual & Utility CD

Chapter 2 Installation

2.1 Hardware Installation

1. Make sure that all computers are connected to the KVM Switch

and their peripherals are in power-off state.

2. Connect the shared USB keyboard, mouse and monitor to the

KVM switch.

3. Connect the shared speaker set and microphone to the KVM

switch (SP214D only).

4. Connect each of your computers to the KVM switch, using

appropriate KVM and/or Audio/Mic cables.

5. The KVM Switch should be automatically power-on with

computers connected.

6. Power up the connected computers one by one then the

keyboard and mouse will be recognized. Now, the KVM switch

can work normally.

Some older computers with USB interface might need to

manually enable the USB option in the BIOS settings before

you can use any USB devices. If your USB interface does

not work, please check the USB option in the BIOS.

If you use Windows 95/98/SE or Mac OS and has not yet

installed a USB mouse on your computer, there might be an

error message telling you that mouse is not detected and

prompting you to decide whether to ignore the same

message in the future, and yet you will find there is no

mouse movement to disable this message….So it is

suggested that you should installed your USB mouse on

your computer first, before connecting it to this KVM Switch.

SP214D Configuration Diagram

2.2 Install KVM Switcher

1. Insert the companion CD into your CD drive, and the Autorun

screen will pop up. (If the Autorun feature has not been enabled

on your computer. Just find the Autorun.exe on the CDROM and

double-click it to start).

2. For Windows/Mac: Just click the “Software Installation for

Window/Mac” to start installation.

(If the Mac version software does not start, you should then copy

it to your local Hard disk on Mac).

3. Follow the instructions to completion. If the instillation is

complete, you will see a KVM Switcher icon on the system tray

of your desktop.

4. Right-click to evoke the operation menu, and double-click to

evoke the configuration box.

The Windows switcher software is recommended for use on

Windows 98 SE or later. The Mac switcher software is

recommended for use on Mac OS 10.4 [Tiger].

Windows Mac OS

No live connection detected

Current active PC channel is on port 1

Current active PC channel is on port 2

The KVM Switcher Software supports both the Windows and

the Mac OS operating systems.

For other OS platforms such as Linux, you can still use the

keyboard hotkey - ScrLk + ScrLK - to switch PC. However,

this switching hotkey is not available on non-PC platform

such as MacOS.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de MicroNet

MicroNet

MicroNet SP676C Manual de usuario

MicroNet

MicroNet SP6528 Manual de usuario

MicroNet

MicroNet SP6124A Manual de usuario

MicroNet

MicroNet SP659B Manual de usuario

MicroNet

MicroNet SP1659P Manual de usuario

MicroNet

MicroNet SP508B Manual de usuario

MicroNet

MicroNet SP6510P8 Manual de usuario

MicroNet

MicroNet SP6008P Manual de usuario

MicroNet

MicroNet SP6524PWS Manual de usuario

MicroNet

MicroNet SP698A Manual de usuario

MicroNet

MicroNet SP684C Manual de usuario

MicroNet

MicroNet SP6008P Manual de usuario

MicroNet

MicroNet SP6108I Manual de usuario

MicroNet

MicroNet SP508C Manual de usuario

MicroNet

MicroNet SP659A Manual de usuario

MicroNet

MicroNet SP616DB Manual de usuario

MicroNet

MicroNet SP6008PWS Manual de usuario

MicroNet

MicroNet EtherFast SP624EA Manual de usuario

MicroNet

MicroNet SP3524A Manual de usuario

MicroNet

MicroNet SP6510P Manual de usuario

MicroNet

MicroNet SP6510P8 Manual de usuario

MicroNet

MicroNet SP1684B Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

MicroNet

MicroNet SP6824P Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manual de usuario