MicroBoards Technology BD Pro Series Manual de usuario

BD Pro Series

User’s Manual

www.microboards.com Version 2.2

Microboards Technology, LLC

BD Pro Series

Table of Contents

Introduction ................................................................................................................ 5

Unpacking your system.............................................................................................. 5

Installation.................................................................................................................. 5

The LCD Control Panel .......................................................................................... 6

Hardware Description............................................................................................. 7

Main Menu ................................................................................................................. 8

Setting Counters ...................................................................................................... 10

Using the BD Pro Series Duplicator ......................................................................... 10

Copy..................................................................................................................... 10

Test ...................................................................................................................... 11

Compare .............................................................................................................. 11

Test + Copy.......................................................................................................... 12

Copy + Compare .................................................................................................. 12

Select Burn Speed ............................................................................................... 12

Select Source....................................................................................................... 12

Erase.................................................................................................................... 12

Hard Drive Setup.................................................................................................. 12

Mix Audio Tracks.................................................................................................. 13

Setup.................................................................................................................... 14

Utilities.................................................................................................................. 14

Manage Accounts................................................................................................. 14

AutoCopy ............................................................................................................. 15

Shutdown ............................................................................................................. 15

The Setup Menu ...................................................................................................... 16

The Utilities Menu .................................................................................................... 20

Using CopyLock Video Protection............................................................................ 21

Specifications – BD Pro Series ................................................................................ 23

Supported Formats .................................................................................................. 23

Technical Support .................................................................................................... 23

Appendix 1: Menu List ............................................................................................. 24

Appendix 2: Error Messages.................................................................................... 25

Microboards Technology, LLC

Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s

authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment and antenna

•Connect the equipment into an outlet on a circuit different than that to which the receiver is connected

•Consult the dealer or an experienced radio/TV technician for help

This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following

European standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE

Marking Directive 93/68/EEC.

Canadian Department of Communications (DOC) Statement

This Class B digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe B est

conforme a la norme NMB-003 du Canade.

BD Pro Series

Introduction

The BD Pro Series includes models containing 4, 7, and 10 recorders. The BD Pro Series

models include an internal hard drive for convenient master storage.

Each is a high speed CD, DVD, and BD Recordable duplication system from Microboards

Technology, LLC.

Regardless of the number of drives, the BD Pro is perfect for any user requiring easy copying of

audio, video, or Data DVD/CD/BDs. The 2-line 20 character LCD display panel provides the user

with status of the duplication process, the type of process being run, master size, and other useful

information.

Applications suited for the BD Pro include Pro Audio, Multimedia, Government / Education,

Software Development, Medical Imaging, and Data Interchange.

Unpacking your system

When unpacking your duplicator, confirm the following items are included:

•BD Pro duplicator

•Power cable

•Manual

•DVD-R disc

•USB cable

•NetConnect software Installation Disc

If any of these items are missing, please contact Microboards Technology Technical Support.

IMPORTANT: Please keep all the packing for your BD Pro duplicator. If your unit ever needs to

be sent in for service, it must be returned in the original packing or the warranty will be voided.

Installation

•Connect the supplied power cable to the BD Pro duplicator and plug in to a protected

power outlet strip or UPS power supply.

Note for Installation:

1) Please verify that the voltage switch above the power connection is set correctly for

your local power specifications.

2) The socket outlet should be installed near the equipment and be easily accessible.

3) Do not block cooling fans.

•Turn on power to the duplicator.

•The system will go through initialization and then display: 1. Copy.

•Install the NetConnect application and drivers on any PC that may be accessing the hard

drive in the duplicator. These are necessary for your PC to recognize the duplicator hard

drive’s format.

•For USB Mode, connect to a PC via an unoccupied USB port. To access the drive, the

External Connection mode must be turned ON in the Setup Menu (See page 17).

•The system is now ready to use.

Microboards Technology, LLC

The LCD Control Panel

The LCD Control Panel shown above has a two-line, 20 character LCD display to provide user

feedback. Eight push buttons control the operation of the Microboards BD Pro Series duplicators.

The functions for these buttons are shown in Table 1-1.

Control Name Function

▲Up Scroll up through the menu or list.

▼Down Scroll down through the menu or list.

ENT ENT or

OK Execute the function. Also called OK in the Menus.

ESC ESC Go back to the previous function.

Copy Quick key to make a copy. Pressing this key takes you directly to the Copy

menu.

Speed Quick key to access the Burn Speed selections. Pressing this key takes you

directly to the Select Burn Speed menu.

CD+G

Quick key to change the CD+G Support setting.

As BluRay Recorders do not support duplication of the CD+G format, this

setting is not used on the BD Pro Series.

Ext

Connect

Quick key to change the External Connection setting. Pressing this key takes

you directly to the External Connection menu item within the Setup menu.

Table 1-1: Front Panel Controls

BD Pro Series

Hardware Description

The BD Pro system consists of 4 to 10 BD Recorders (based on model), USB Connection, and

Controller module. The BD Pro Series also includes an internal Hard Drive for Master Image

Storage.

The USB Connection is located on the back of the BD Pro.

The master discs always go into the top recorder drive.

The blank media will always go into the remaining recorder drives.

The power switch and power LED are also located on the front of the BD Pro duplicator.

The LCD display will show the different menu selections and also information pertaining to the

recording process. Here is a typical example of what is displayed during the COPY process:

BD Recorder Drives

Controller Interface

Power Switch and

LED

BD PROV3-04

Copying

71%

15 3157M

Displays the function being performed,

such as Copying or Testing.

Shows the total size of the

master being copied.

Displays the number of discs

successfully burned with the

current master.

Shows the amount of data burned

to the discs currently in the

recorders.

4447M

Shows the percentage

completed for this

action.

Microboards Technology, LLC

Main Menu

This section provides an overview of the menu options. These menu options are explained in

detail in the Using the BD Pro Series Duplicator section starting on page 10.

Copy

Use the Copy menu to make CD and DVD copies. Before you start a copy, make sure

you have selected the correct Master Source.

Test

Use the Test menu to simulate the copy process. With simulation, write once recordable

discs such as DVD-R, or CDR will be reusable.

Note: DVD+R and BD recordable media are not compatible with simulation mode. If

you try to simulate with these media types, you will encounter failure messages.

If you are using Rewritable discs as your blank media during the simulation, the

content on those discs will be permanently erased.

Compare

Use the Compare function to perform a bit-by-bit comparison between the content of your

master disc and the contents of all discs it copied. This ensures that all of your copies are

identical to original master disc.

Note: The bit-by-bit comparison will only apply on all DVDs and Data CDs. The

readability check will be applied for other formats like Audio CDs, CD+G, and

Video CDs discs due to their lack of error correction mechanisms.

Test + Copy

Use the Test + Copy menu option to simulate the copying process initially. Then, the

duplicator performs the copy process on the blank disc(s) that passed the simulation.

Copy + Compare

Use the Copy + Compare menu option to make 100% reliable copies. After the copy

process is done, the duplicator automatically compares the copies from the content of

your original master disc.

Select Burn Speed

Use the Select Burn Speed menu option to adjust the duplication speed for the various

blank disc formats. For additional information, see Select Burn Speed on page 12.

Select Source

Use the Select Source menu option to specify which drive is being used as the master

drive. You should always select the DVD-ROM drive or the hard drive (if available) as

the source unless there is a specific need to use one of the recorders as the master

drive.

Erase

Use the Erase menu to erase your Rewritable discs.

Hard Drive Setup

This menu item will not appear if the External Connection setting is ON.

Use the Hard Drive Setup menu to access the Hard Drive functions. You can scroll

between the various options using the ▲Up or ▼Down button. For information on the

Hard Drive Setup functions, please see page 12.

1. Select Partition

2. Load Partition

3. Rename Partition

4. Delete Partition

5. Partition Info

6. Select Loading Drive

7. Format Hard Drive

Mix Audio Tracks

Use the Mix Audio Tracks menu option to select and burn specific tracks from Audio CDs

onto your blank CDs. This function will not operate if CD+G Support is ON (page 19).

BD Pro Series

Setup

Use the Setup menu options to control how the Duplicator operates. You can scroll

between the various options using the ▲Up or ▼Down button.

1. Language

2. Auto Start

3. Read Error Skip

4. CD Writing Mode

5. Max Audio, VCD & CDG Speed

6. Buzzer

7. Startup Menu

8. Screen Saver

9. Duplication Mode

10. Counter

11. DVD+R High Compatibility Mode

12. ISRC

13. Disable Drives

14. External Connection

15. CD+G Support (Note: BluRay Recorders do not support the CD+G format)

16. Overburn

Utilities

The Utilities menu includes a number of functions that are not related to the actual

duplication process.

1. Disc Info

2. Prescan

3. System Info

4. Device Info

5. Load Default

6. Update Firmware

7. Save

Manage Accounts

The Manage Accounts menu includes optional User functions that allow you to limit

access to the duplicator.

1. View User

2. Create User

3. Edit User Info

4. Delete User

5. Password on Bootup

AutoCopy

The AutoCopy function simplifies the copy process. After the initial round of blanks is

burned, you only need to load the drives again and close them. Once the drives detect

the new blank media in the drives, duplication begins without you having to touch the

control panel.

Shutdown

Use this menu option to save any setting changes you may have made and turn off your

system. Once you see the “Ready to Power Off” message, you can safely turn off the

machine using the power switch.

Turning off your duplicator without performing this function increases the risk of damaging

it. Additionally, if you made any setting changes, those changes may not be saved if you

simply turn off the power to the duplicator.

Microboards Technology, LLC

Counter:

Specify Counter

Specify Counter:

[0 ] OK?

Counter:

No Counter

Microboards B.30

1. Copy

Counter:

No Counter

Preparing... 4063MB

3 Discs Detected, Go?

Setting Counters

The BD Pro Series give you the option to set a counter so that the machine can keep track of the

number of copies made. Follow these steps when you see a Counter Selection Menu:

The Counter Selection Menu lets you set how many copies you want to

make for your project. The Counter Selection feature tells the duplicator

to count the number of successful copies you have made and stop the

job when the desired number of copies has been reached.

You can select “No Counter” if you prefer to copy continuously with no interruption. (It will still

count the number of copies, but it will not notify you when to stop.) To select the “No Counter”,

simply press the ENT button when you see the screen above.

Or, you can select “Specify Counter” between 1 to 9999 by pressing the ▲Up or ▼Down button

to go to the Specify Counter menu:

Press the ENT button to select this option. You will see the next

Specify Counter menu.

To specify the number of copies for your project, you need to input a

four-digit number. If you need to specify a number that is less than

four digits, fill the leading spaces with zeros. Examples are “0234”

(two hundred and thirty four), or “0010” (ten).

To enter the number, you need to use the ▲Up or ▼Down button to select the number for each

digit and use the ENT button or the ESC button to move the cursor position right or left. Once

you've finished, move the cursor to “OK” and press the ENT button.

To input the desired quantity, do the following:

¾Make sure the cursor is located at the first position (First blinking position):

¾Press the ▼Down button repeatedly until “0” is displayed.

¾Press the ENT button once to move the cursor to the next position.

¾Press the ▼Down button repeatedly until “0” is displayed.

¾Press the ENT button once to move the cursor to the next position.

¾Press the ▼Down button repeatedly until “2” is displayed.

¾Press the ENT button once to move the cursor to the next position.

¾Press the ▼Down button repeatedly until “1” is displayed.

¾With “0021” displayed, press the ENT button once and the cursor moves to “OK”.

¾Press the ENT button once more to submit your counter value and start duplication.

Using the BD Pro Series Duplicator

Copy

This process will copy your master disc on to several blank discs

simultaneously.

Use the ▼▲ buttons to navigate to the 1. Copy Menu.

Insert your blank discs in the recorder drives. If your Counter

setting is ON, you will see the Counter Selection menu:

Follow the instructions shown in Setting Counters (above) to continue. Once the counters have

been set, press the ENT button to confirm.

As the blank discs are recognized, the number detected will

increase. Press the ENT button to start the duplication. If you

have Autostart set, duplication will begin either once all recorders

have been found to contain blank media or until the Autostart time interval passes.

Tabla de contenidos

Otros manuales de Duplicadora de discos de MicroBoards Technology

MicroBoards Technology

MicroBoards Technology LightScribe Series Manual de usuario

MicroBoards Technology

MicroBoards Technology PrintFactory PF-3 Manual de usuario

MicroBoards Technology

MicroBoards Technology GX-2 Manual de usuario

MicroBoards Technology

MicroBoards Technology PF3-1000 Manual de usuario

MicroBoards Technology

MicroBoards Technology PF-2 PrintFactory Manual de usuario

MicroBoards Technology

MicroBoards Technology Orbit II Manual de usuario

MicroBoards Technology

MicroBoards Technology GX-2 Manual de usuario

MicroBoards Technology

MicroBoards Technology GX-2 Manual de usuario

MicroBoards Technology

MicroBoards Technology GX-2 Manual de usuario

MicroBoards Technology

MicroBoards Technology CX-1 Publisher Manual de usuario

MicroBoards Technology

MicroBoards Technology QD-DVD 123 Manual de usuario

MicroBoards Technology

MicroBoards Technology G4 Manual de usuario

MicroBoards Technology

MicroBoards Technology GX-1 Manual de usuario

MicroBoards Technology

MicroBoards Technology CX-1 Publisher Manual de usuario

MicroBoards Technology

MicroBoards Technology CX-1 Publisher Manual de usuario

MicroBoards Technology

MicroBoards Technology Quic Disc QD-2 Manual de usuario

MicroBoards Technology

MicroBoards Technology G3 Auto Printer Manual de usuario

MicroBoards Technology

MicroBoards Technology G3 Auto Printer Manual de usuario

MicroBoards Technology

MicroBoards Technology Orbit II Manual de usuario

MicroBoards Technology

MicroBoards Technology CX-1 Publisher Manual de usuario

MicroBoards Technology

MicroBoards Technology DVD Premium Pro Series Manual de usuario

MicroBoards Technology

MicroBoards Technology Micro Orbit Manual de usuario

MicroBoards Technology

MicroBoards Technology Orbit II Manual de usuario

MicroBoards Technology

MicroBoards Technology QD-DVD Manual de usuario

Manuales populares de Duplicadora de discos de otras marcas

Riso

Riso CV Series Manual

Addonics Technologies

Addonics Technologies HDUS325DX Manual de usuario

Carry

Carry Pro118 Manual de usuario

CopyPro

CopyPro PowerPro II Manual de usuario

Primera

Primera Max Manual de usuario

Logicube

Logicube EchoPlus-NG Manual de usuario

Silca

Silca Delta 2000 SA Manual de usuario

Reflex7

Reflex7 Daisy Chain Series Manual de usuario

Vinpower Digital

Vinpower Digital SharkCopier DC Manual de usuario

Codonics

Codonics Virtua E Manual de usuario

Octave

Octave Copy Master II Manual de usuario

Kanguru

Kanguru U2-DVDDUPE-S Manual de usuario

StarTech.com

StarTech.com 8STSATDUP11 Manual de usuario

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Manual de usuario

Addonics Technologies

Addonics Technologies UDFH7 Manual de usuario

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Manual de usuario

Addonics Technologies

Addonics Technologies CFASTD5 Manual de usuario

Telex

Telex SpinWise Manual de usuario