Metrohm 801 Manual de usuario

801 Stirrer

Manual

8.801.8001EN / 2019-11-27

Metrohm AG

CH-9100 Herisau

Switzerland

Phone +41 71 353 85 85

Fax +41 71 353 89 01

[email protected]

www.metrohm.com

801 Stirrer

Manual

8.801.8001EN / 2019-11-27

Technical Communication

Metrohm AG

CH-9100 Herisau

[email protected]

This documentation has been prepared with great care. However, errors

can never be entirely ruled out. Please send comments regarding possible

errors to the address above.

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of contents

801 Stirrer ￭￭￭￭￭￭￭￭ III

Table of contents

1 Introduction 1

1.1 Instrument description ......................................................... 1

1.2 About the documentation ................................................... 1

1.2.1 Symbols and conventions ........................................................ 1

1.3 Safety instructions ................................................................ 2

1.3.1 General notes on safety ........................................................... 2

1.3.2 Electrical safety ........................................................................ 2

1.3.3 Working with liquids ................................................................ 3

1.3.4 Flammable solvents and chemicals ........................................... 3

1.3.5 Recycling and disposal ............................................................. 4

2 Overview of the instrument 5

3 Installation 6

3.1 Setting up the instrument .................................................... 6

3.1.1 Packaging ................................................................................ 6

3.1.2 Checks .................................................................................... 6

3.1.3 Location .................................................................................. 6

3.2 Mounting the 801 Stirrer ..................................................... 7

3.3 Connecting the 801 Stirrer .................................................. 9

4 Technical specifications 11

4.1 Rotational speed ................................................................. 11

4.2 Power supply ...................................................................... 11

4.3 Ambient temperature ......................................................... 11

4.4 Dimensions .......................................................................... 11

4.5 Material ............................................................................... 12

5 Accessories 13

Table of figures ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

IV ￭￭￭￭￭￭￭￭ 801 Stirrer

Table of figures

Figure 1 Front 801 Stirrer ................................................................................ 5

Figure 2 Rear 801 Stirrer ................................................................................. 5

Figure 3 Connecting the 801 Stirrer ................................................................ 9

Figure 4 Connecting the Dosino to the 801 Stirrer. ........................................ 10

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction

801 Stirrer ￭￭￭￭￭￭￭￭ 1

1 Introduction

1.1 Instrument description

The magnetic stirrer 801 Stirrer including base plate, support rod and elec-

trode holder supplements the Titrino plus, Titrandos, Sample Processors,

805 Dosimats and 780/781 pH Meter.

It is directly connected to an analysis device via an MSB connection cable.

1.2 About the documentation

CAUTION

Please read through this documentation carefully before putting the

instrument into operation. The documentation contains information

and warnings which the user must follow in order to ensure safe opera-

tion of the instrument.

1.2.1 Symbols and conventions

The following symbols and styles are used in this documentation:

Cross-reference to figure legend

The first number refers to the figure number, the sec-

ond to the instrument part in the figure.

Instruction step

Carry out these steps in the sequence shown.

Warning

This symbol draws attention to a possible life hazard

or risk of injury.

Warning

This symbol draws attention to a possible hazard due

to electrical current.

Warning

This symbol draws attention to a possible hazard due

to heat or hot instrument parts.

1.3 Safety instructions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

2￭￭￭￭￭￭￭￭ 801 Stirrer

Warning

This symbol draws attention to a possible biological

hazard.

Caution

This symbol draws attention to a possible damage of

instruments or instrument parts.

Note

This symbol marks additional information and tips.

1.3 Safety instructions

1.3.1 General notes on safety

WARNING

Operate this instrument only according to the information contained in

this documentation.

This instrument left the factory in a flawless state in terms of technical

safety. To maintain this state and ensure non-hazardous operation of the

instrument, the following instructions must be observed carefully.

1.3.2 Electrical safety

The electrical safety when working with the instrument is ensured as part

of the international standard IEC 61010.

WARNING

Only personnel qualified by Metrohm are authorized to carry out service

work on electronic components.

WARNING

Never open the housing of the instrument. The instrument could be

damaged by this. There is also a risk of serious injury if live components

are touched.

There are no parts inside the housing which can be serviced or replaced

by the user.

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction

801 Stirrer ￭￭￭￭￭￭￭￭ 3

Supply voltage

WARNING

An incorrect supply voltage can damage the instrument.

Only operate this instrument with a supply voltage specified for it (see

rear panel of the instrument).

Protection against electrostatic charges

WARNING

Electronic components are sensitive to electrostatic charges and can be

destroyed by discharges.

Do not fail to pull the power cord out of the power socket before you

set up or disconnect electrical plug connections at the rear of the

instrument.

1.3.3 Working with liquids

CAUTION

Periodically check all system connections for leaks. Observe the relevant

regulations in respect to working with flammable and/or toxic fluids

and their disposal.

1.3.4 Flammable solvents and chemicals

WARNING

All relevant safety measures are to be observed when working with

flammable solvents and chemicals.

￭Set up the instrument in a well-ventilated location (e.g. fume cup-

board).

￭Keep all sources of flame far from the workplace.

￭Clean up spilled liquids and solids immediately.

￭Follow the safety instructions of the chemical manufacturer.

1.3 Safety instructions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

4￭￭￭￭￭￭￭￭ 801 Stirrer

1.3.5 Recycling and disposal

This product is covered by European Directive 2012/19/EU, WEEE – Waste

Electrical and Electronic Equipment.

The correct disposal of your old instrument will help to prevent negative

effects on the environment and public health.

More details about the disposal of your old instrument can be obtained

from your local authorities, from waste disposal companies or from your

local dealer.

Otros manuales para 801

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Metrohm

Metrohm

Metrohm 930 Compact IC Flex Manual de usuario

Metrohm

Metrohm OMNIS 6.03001.120 Manual de usuario

Metrohm

Metrohm Autolab RDE2 Manual de usuario

Metrohm

Metrohm Inline Ultrafiltration 2 Manual de usuario

Metrohm

Metrohm 930 Compact IC Flex Oven/ChS Manual de usuario

Metrohm

Metrohm OMNIS 2.1006.00X0 Manual de usuario

Metrohm

Metrohm 884 Professional VA Manual de usuario

Metrohm

Metrohm 761 SD Compact IC Manual de usuario

Metrohm

Metrohm 942 Extension Module Vario HPG Manual de usuario

Metrohm

Metrohm 832 KF Thermoprep Manual de usuario

Metrohm

Metrohm 870 KF Titrino plus Instrucciones de operación

Metrohm

Metrohm 663 VA Stand Manual de usuario

Metrohm

Metrohm 815 Manual de usuario

Metrohm

Metrohm 763 PVC Thermomat Manual de usuario

Metrohm

Metrohm 940 Professional IC Vario ONE/LPG Manual de usuario

Metrohm

Metrohm OMNIS 2.1006.0010 Manual de usuario

Metrohm

Metrohm Autosampler plus 919 IC Manual de usuario

Metrohm

Metrohm 838 Advanced Sample Processor Manual de usuario

Metrohm

Metrohm Professional IC Vario 940 Manual de usuario

Metrohm

Metrohm 802 Stirrer Manual de usuario

Metrohm

Metrohm 892 Professional Rancimat Manual de usuario

Metrohm

Metrohm 917 Coulometer Manual de usuario

Metrohm

Metrohm 730 Manual de usuario

Metrohm

Metrohm Titrino 719 S Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario