Marshall Amplification EFFECT PEDAL BB2 Manual de usuario

BB-2 Bluesbreaker II

Bluesbreaker II Suggested Settings

Owners Manual

BOOST (Amp: Slightly Distorted)

BLUES LEAD (Amp: Clean)

FUNKY BLUES (Amp: Clean)

HOT HARMONICS (Amp: Clean)

Whilst the information contained herein is correct at the time of

publication, due to our policy of constant improvement and

development, Marshall Amplification plc reserve the right to alter

specifications without prior notice.

7 / 05

Marshall Amplification plc

Denbigh Road, Bletchley, Milton Keynes,

MK1 1DQ, England.

Tel : +44 (0)1908 375411 Fax : +44 (0)1908 376118

www.marshallamps.com

WARNING!

IMPORTANT Precautions

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

WARNING

Do not expose the apparatus to rain or moisture. Do not expose

the apparatus to dripping or splashing. No objects filled with

liquids should be placed on or near the apparatus. Do not use

this apparatus near water.

Clean only with dry cloth.

Changes or modifications not expressly approved by Marshall

Amplification plc could void the user’s authority to operate the

equipment.

Heed all warnings.

Follow all instructions.

Keep these instructions.

2367

European Product Only

From The Chairman

I would like to personally thank you

for selecting one of our effects pedals.

For over 40 years the Marshall name has been synonymous

with the greatest guitar tones in music. We have worked hand

in hand with guitarists from all levels throughout the world to

maintain and improve that special ingredient, ‘The Marshall

Sound.’

Our range of effects pedals gives the opportunity to augment

the classic Marshall tone to add Marshall character to a guitar

set-up.

All our pedals are made with the same utmost attention to

quality, in both materials and manufacture as our world

renowned amplifiers, cabinets and combos, in order to provide

you with optimum reliability and tone.

I would like to wish you every success with all of your musical

endeavours and also your new Marshall effects pedal, which I

am sure you will find a pleasure to play for many years to

come.

Yours Sincerely,

ENGLISH

Introduction

The Bluesbreaker II takes the philosophy of our original

Bluesbreaker pedal one step further and features two modes,

Blues and Boost. This effectively makes it two pedals in one.

Boost Mode is designed with the vintage valve amp or ‘tone

purist’ type of guitar player in mind. If you don’t want to alter

the tone of your amp at all, but want to drive the front end

harder to push the amp further into natural overdrive. The

Boost mode features a clean boost controlled by the pedal’s

volume control, which will not affect your original tone. It can

also be used for boosting the signal which can sometimes be

lost when using long leads (particularly with single coil pick-

ups).

Blues Mode is reminiscent of the tonal and distortion

characteristics of our non master volume amps such as the

classic Bluesbreaker combo from the 1960s. This Mode

produces a wonderful natural style overdrive for crunchy

chord work and singing single notes for truly inspirational

leads, all delivered with the warmth and tonality of those early

Marshalls.

The Bluesbreaker II features a true full passive bypass for the

main signal path to ensure complete tonal integrity and has a

quality of tone matched only by its versatility.

This booklet provides a guide to the Bluesbreaker II’s features

for your information. We have also enclosed a number of

suggested settings to help you to get started. It should be

remembered that these are only suggested settings and you

should really experiment whenever you can.

If you take the time to explore the many different overdrive

and distortion characters of the Bluesbreaker II, you won’t be

disappointed.

Features

1. Out Jack Socket

This is the output of the Bluesbreaker II and is for connection

to the amplifier or to another effects pedal.

2. Mode

Allows for selection of Boost and Blues modes.

Boost Mode completely bypasses the Tone and Drive network

of the Bluesbreaker II and adds a clean boost to the signal

controlled by the Volume (Item 7) control. This will give your

guitar an extra lift and is ideal for driving the front end of a

valve amp into distortion without affecting your all important

tone. This is particularly suited for amps that are already

naturally slightly distorting, giving them an extra kick over

the edge, or for boosting your sound for solos.

Always use good quality shielded leads.

Always use 9V regulated DC supply with centre negative.

Although it may seem obvious the first action in achieving a

good effected sound (be it duration / compression etc.) is to

find the perfect bypassed sound. This will then allow the

correct level to be set with the effect unit to allow a cut or

boost in volume and a realistic tone.

On clean channels it is advisable to set the gain (or volume)

to a setting of no less than one quarter maximum so as not to

get unrealistic results due to any volume dependent tonal

shaping on the amplifier preamp.

Setting Up

ENGLISH

In Blues Mode all controls are operational and the

Bluesbreaker II will give your guitar a wonderfully creamy,

natural sounding bluesy overdrive. This mode is great when

using a clean amp but can also be used with an amp that is

already distorting for extra Marshall mayhem.

3. Drive

This increases the amount of distortion, taking you from

vintage breakup, ideal for big crunchy chords and sweet

singing blues, to full on overdrive.

N.B. This control is only operational when on Blues mode.

4. DC Input

For input of a 9V DC adaptor should you not wish to use

batteries.

5. LED

Indicates when the Bluesbreaker II is in operation.

6. Tone

The Bluesbreaker II features pre-set bass and mid controls, for

optimum response. This Tone control effects the treble region

of your tone adding brightness and cut.

N.B. This control is only operational when on Blues mode.

7. Volume

Controls the volume of the pedal.

When in Boost mode this governs the level of the signal

driving into the amplifier. The more the level is increased the

more you will push the amp into distortion.

When in Blues mode this control allows you to set a different

volume level for solos etc.

8. In Jack Socket

This is the input jack, for connection to your guitar or to

another effects pedal if you are linking pedals together.

9. Foot Switch

For switching the Bluesbreaker II on and off.

WHAT IF

OUTPUT

SOUND TOO

TREBLY OR

FIZZY

UNUSUAL

HUM

BASS

FEEDBACK

SOUND TOO

MUSHY OR

BASSY

UNUSUAL

FEEDBACK

INDICATOR

LED NOT

NOISE IN

BYPASS

CHECK

BATTERY

CHECK

LEADS

CHECK PEDAL

CONTROLS

DC INLET

CHECK AMP

CONTROLS

CHECK GUITAR

REDUCE

TREBLE

REDUCE

TREBLE

INPUT

LEAD

Trouble Shooting

3333

333

MOVE AWAY

FROM AMP

PICKUPS

MAY BE

VIBRATING

ESPAÑOL

Battery Replacement

1. To replace the battery, open

the easily accessed coin

screw battery cover plate by

loosening screw as shown,

then disconnect the battery

connector lead.

2. Use PP3 or equivalent

battery (for improved

battery life use alkaline type)

3. Always ensure that the

battery is removed when the

pedal is not in use for long

periods.

4. Dispose of old battery

in a safe place.

Technical Specification

Power: 9V DC Centre Negative Regulated

Current Draw: 8mA

Controls: Blues/Boost Mode Select, Drive, Tone & Volume

Switches: On/Off Switch

Indicators: On/Off LED

Jacks: Input/Output ‘Jacksockets’

Input Impedance: 1MΩ

Output Load Impedance: max 25kΩ

Dimensions: 120mm x 65mm x 55mm

Weight: 510 grammes

Unas palabras

del Presidente

Quiero agradecerte personalmente el haber elegido uno de

nuestros pedales de efectos.

Desde hace más de 40 años el nombre de Marshall es

sinónimo del mejor sonido de guitarra. Hemos trabajado mano

a mano con guitarristas de todos los niveles y de todas partes

del mundo para mantener y mejorar este ingrediente especial:

“El sonido Marshall”.

Nuestra nueva gama de pedales de efectos te da la

oportunidad de aumentar el clásico tono de Marshall o añadir

“personalidad” Marshall a cualquier equipo de guitarra. Están

fabricados prestando tanta atención a la calidad de los

materiales como el resto de la gama de amplificadores y

combos Marshall, para ofrecerte gran fiabilidad y tono.

Quiero desearte grandes éxitos en todas tus empresas

musicales y con tu nuevo pedal de efectos, que estoy seguro

te resultará un placer utilizar durante muchos años.

Sinceramente

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pedal de música de Marshall Amplification

Marshall Amplification

Marshall Amplification SHREDMASTER Manual de usuario

Marshall Amplification

Marshall Amplification EFFECT PEDAL RG-1 REGENERATOR Manual de usuario

Marshall Amplification

Marshall Amplification EFFECT PEDAL EH-1 ECHOHEAD Manual de usuario

Marshall Amplification

Marshall Amplification Bluesbreaker Manual de usuario

Marshall Amplification

Marshall Amplification EFFECT PEDAL RF-1 REFLECTOR Manual de usuario

Marshall Amplification

Marshall Amplification JH-1 Manual de usuario

Marshall Amplification

Marshall Amplification EFFECT PEDAL SV-1 SUPERVIBE Manual de usuario

Marshall Amplification

Marshall Amplification JH-1 Manual de usuario

Marshall Amplification

Marshall Amplification EFFECT PEDAL VT-1 VIBRATREM Manual de usuario

Marshall Amplification

Marshall Amplification EFFECT PEDAL VT-1 VIBRATREM Manual de usuario

Marshall Amplification

Marshall Amplification GV-2 Guv’nor Plus Manual de usuario

Marshall Amplification

Marshall Amplification DRIVEMASTER Manual de usuario

Marshall Amplification

Marshall Amplification EFFECT PEDAL ED1 COMPRESSOR Manual de usuario

Marshall Amplification

Marshall Amplification GUV'NOR Manual de usuario

Manuales populares de Pedal de música de otras marcas

Behringer

Behringer ULTRA WAH UW300 Manual de usuario

Whirlwind

Whirlwind oc-bass Manual de usuario

Strymon

Strymon Lex-rotary Manual de usuario

Behringer

Behringer PB600 Manual de usuario

Lexicon

Lexicon MX200 Manual de usuario

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manual de usuario

Matthews Effects

Matthews Effects Whaler V2 Manual de usuario

Grid 1

Grid 1 Pedal Jeanie Manual de usuario

Amptweaker

Amptweaker tightboost Manual de usuario

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manual de usuario

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manual de usuario

BYOC

BYOC Analog Chorus Manual

Dimavery

Dimavery EPVP-50 Manual de usuario

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manual de usuario

Pro-MIDI

Pro-MIDI G25 Manual de usuario

DW 7000 Manual de usuario

FAMC

FAMC Liquid-Foot Jr. Series Manual de usuario

Dimavery

Dimavery EPOD-50 Overdrive Manual de usuario