marsden M-610 Manual de usuario
M-610
USER MANUAL
PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE
STARTING TO USE THE SCALES
1
TABLE OF CONTENTS
INTRODUCTION…….………………………………………… 2
POWER SUPPLY…….………………………………………… 4
INSTRUCTION FOR REPLACING BATTERIES…………… 5
SPECIFICATIONS………………………………………….…. 7
KEY FUNCTIONS……………………………………………… 8
LCD SYMBOL DESCRIPTION………………………………. 9
MAINATENANCE AND GENERAL CARE……………….… 10
1.0 BASIC FUNCTIONS……………………………………. 11
1.1 SWITCHING ON ………………………………. 11
1.2 SWITCHING OFF……………………………… 12
1.3 SETTING ZERO……………………………….. 12
2.0 ADVANCED FUNCTIONS …………………………… 13
2.1 HOLD FUNCTION …………………………….. 13
2.2 BODY MASS INDEX (BMI) FUNCTION…….. 14
2.3 SETTING AND RECALL THE PRE-TARE FUNCTION 15
2.4 SETTING THE DATE AND TIME……………. 16
2.5 PRINTING FUNCTION………………………. 17
2.6 ASSEMBLING THE TP2100) PRINTER……… 18
2.7 BLUETOOTH VERSION……………………………. 18
2.8 BLUETOOTH CONNECTION……………………… 19
ERROR MESSAGES………………………………………... 21
ROHS COMPLIANCE & PRODUCT CONFORMITY……. 22
CONTACT INFORMATION ………..………………………… 23
2
INTRODUCTION
Thank you for purchasing a Marsden Professional Medical
Scale. This is a precision Class III Weighing Instrument and it
will reward considerate use with many years of accurate
weighing results
SAFETY INSTRUCTION
Before putting the device into use, please read with care the
information given in the Operating Instructions. They contain
important instructions for installation, proper use and maintenance of the
device.
The manufacturer shall not be liable for damages arising out of failure to
heed the following instructions:
1. Don’t leave the baby unattended on scale.
2. When using electrical components under increased safety requirements,
always comply with the appropriate regulations.
3. Improper installation will render the warranty null and void.
4. Ensure the voltage marked on the power supply unit matches your mains
power supply.
5. This device is designed for use indoors.
6. Observe the permissible ambient temperatures for use
7. The device meets the requirements for electromagnetic compatibility. Do
not exceed the maximum values specified in the applicable standards.
8. These batteries should be kept away from small children. If swallowed,
promptly seek medical assistance.
9. Expected Service Life: 5 years
If you have any problem, contact your local service partner.
CLEANING
10. We would recommend using alcohol based wipes or similar when
cleaning the scales.
11. Please do not use large amounts of water when cleaning the scales as
this will cause damage to the scales electronics, you should also refrain
from using corrosive liquids or high pressure washers.
12. Always disconnect the scales from the mains power supply before
cleaning.
3
13.
MAINTENANCE
14. The scale does not require any routine maintenance. However, we
recommend checking the scale’s accuracy at regular intervals. The
regularity of these checks is dependent on the level of use and the state
of the scale. If any inaccuracies occur, please contact your local dealer or
service partner
DISPOSING OF THE SCALE
15. This product is not to be treated as regular household waste, but should
be handed in to an electrical/electronic equipment recycling centre.
16. You can obtain further details from your local council, your municipal
waste disposal company or the firm which you purchased the product
17.
Explanation of the graphic symbols
This EEC verification mark indicates that
these scales are in conformity with EEC
Directive 2009/23/EC for Non-Automatic
Weighing Instruments. Weighing instruments
bearing this mark are approved for medical
purposes within the European Union.
SN-21300100
Designation of the serial number of every
device, applied at the device.
(Number as an example)
“Please note the accompanying documents“
or “Observe operating instructions”
“Electro-medical appliance“
with attachment for type B
Device protection category II
4
Dispose of old appliances separately from
your household waste!l!
Instead, take them to communal collection
points.
Carefully read this operation manual
before setup and commissioning, even if
you are already familiar with Marsden
scales.
5
POWER SUPPLY
1. Make sure the battery pack is installed in the battery box of
indicator, or, plug the connector of AC ADAPTER (12V 1A) in the
indicator.
The INDICATOR uses a rechargeable battery pack, or an
AC adaptor.
When the indicator displays (low battery
indication), please plug in the AC adaptor for operation and
rechargeable batteries (where rechargeable batteries are
installed) –for at least 4.5 hours if batteries are fully
charged.
The battery should be recharged at least every 3
months regardless if it is used or not. After a long
period in storage, e.g. over 3 months, the battery
should run a full cycle (charge/discharge) to allow it
to restore to full capacity.
6
9
INSTRUCTION FOR REPLACING
BATTERIES
1. Take out the battery housing, and reset the rechargeable battery.
2. To make sure that the housing pin is connecting to the right point.
3. Place the housing back, and close the battery housing cover.
Rechargeable
Battery
AA size Battery
( to fit on an
optional battery
holder)
7
SPECIFICATION
Capacity &
Division
300kg x 100g
Accuracy
±150g
Units of Measure
kg
Function keys
ON/OFF, ZERO, TARE, BMI, UNIT, HOLD, PRINT,
0 ~ 9
Stabilisation Time
1-2 seconds
Operating Temp. and
humidity
0°C - 40°C
15% - 85% RH
Transport and storage
temp. And humidity
- 20°C … + 60°C
10% - 95% RH
Power supply
7.2V 2000mA Rechargeable battery pack or
Adaptor: 12v 1A
Indicator display
1.0” LCD display with 5 active digits
Dimensions
(w x d x h)
1200mm x 150mm x 95mm
8
KEY FUNCTIONS
Key
Description
ON/OFF
Switching on/off the scale
PRINT
Data transmission via interface
BMI
Determination of Body Mass Index
HOLD
Hold function / determination of stable weighing
value
Long press 3sec, to enter into the “TIME” setting
mode.
ZERO
The scale is reset to 0.0kg display.
It is possible to set max. up to 2% of maximal load
for verified scales, and 2% or 100% of maximal load
for common scales (possibility of selection in the
menu)
TARE
Taring the scale
Long press 3sec, to enter the Pre-tare Setting
mode.
UNIT
Press this key to select weight units (kg and lb).
NOTE: only “kg” unit can be used in approval
mode.
0-9
Entering digits
9
LCD SYMBOL DESCRIPTION
Definitions
Stable symbol: To indicate that the weight is stable.
Minor weight: Weight under zero.
Zero symbols: Weight is at zero point.
Power Index: When the indicator show “LO”, means Battery need to
recharge.
Otros manuales para M-610
1
Tabla de contenidos
Otros manuales de Escala de marsden
marsden
marsden M-100 Manual de usuario
marsden
marsden M-550BT Manual de usuario
marsden
marsden M-700 Manual de usuario
marsden
marsden MBF-6000 Manual de usuario
marsden
marsden M-310 Manual de usuario
marsden
marsden MBF-6010 Manual de usuario
marsden
marsden Jadever JCO Manual de usuario
marsden
marsden PB-1200-I-400-APP Manual de usuario
marsden
marsden V-110 Manual de usuario
marsden
marsden M-M-955 Manual de usuario
marsden
marsden M-999 Manual de usuario
marsden
marsden V-180 Manual de usuario
marsden
marsden VT-250 Manual de usuario
marsden
marsden MSS-I-400 Manual de usuario
marsden
marsden M-225 Manual de usuario
marsden
marsden M-545 Manual de usuario
marsden
marsden M-165 Manual de usuario
marsden
marsden VS 250E Manual de usuario
marsden
marsden M-925 Manual de usuario
marsden
marsden M-150 Manual de usuario
