Marmitek GIGAVIEW 545 Manual de usuario

IGAVIE

545

20447/20120118 • GIGAVIEW 545™

LAUNAMRESU

GEBRAUCHSANLEITUNG

GUIDE UTILISATEUR

MODO DE EMPLEO

MANUALE D’ISTRUZIONI

GEBRUIKSAANWIJZING

GigaView 545™

website_lr_20447_20120118_UG_124Page 1 10-2-2012 14:11:21

GIGAVIEW 545 1

ENGLISH

SAFETY WARNINGS

xTo prevent short circuits, this product should only be used inside

and only in dry spaces. Do not expose the components to rain or

moisture. Do not use the product close to a bath, swimming pool

etc.

xDo not expose the components of your system to extremely high

temperatures or bright light sources.

xDo not open the product: the device contains live parts. The

product should only be repaired or serviced by a qualified

repairman.

xIn case of improper use or if you have opened, altered and

repaired the product yourself, all guarantees expire. Marmitek

rejects responsibility in the case of improper use of the product or

when the product is used for purposes other than specified.

Marmitek does not accept liability for additional damages other

than covered by the legal product liability.

xOnly connect the adapter to the mains after checking whether

the mains voltage is the same as the values on the identification

tags. Never connect an adapter or power cord when it is

damaged. In that case, contact your supplier.

xThis product is not a toy. Keep out of reach of children.

CONTENTS

SAFETY WARNINGS..................................................................................1

CONTENTS ................................................................................................1

WIRELESS SOUND AND VISION! ..............................................................2

HOW DOES THE GIGAVIEW 545™ WORK?.............................................2

SET CONTENTS .........................................................................................2

GIGAVIEW 545 .........................................................................................3

SETTING UP THE AV TRANSMITTER ........................................................4

SETTING UP THE AV RECEIVER ................................................................5

CONNECT IR EXTENDER CABLE & SENOR (IF NECESSARY).....................6

FREQUENTLY ASKED QUESTIONS ...........................................................7

TECHNICAL DATA ....................................................................................8

WIRELESS SOUND AND VISION!

xWireless transmission of pictures and stereo sound through walls

and ceilings.

xCan be used with any make of DVD player, satellite receiver,

decoder, etc.

xWatch all your digital TV channels on a second TV.

xNo distortion from devices such as microwave ovens, wireless

(WiFi) networks, Bluetooth, etc. by using the 5.8 GHz frequency

band.

xMount the receiver (out of sight) behind your TV or on the ceiling

next to your projector.

HOW DOES THE GIGAVIEW 545™

WORK?

It's really simple! The set consists of a transmitter and a receiver.

Connect the transmitter to your A/V equipment (e.g. Satellite or

DVD). Then connect the receiver to your second TV. Via the infrared

extender, you can also continue to operate A/V equipment that is set

up in a different room (or in a closed cupboard) with your own

remote control.

SET CONTENTS

1 A/V Transmitter

1 A/V Receiver

2 Power adapters

1 IR Sensor Extender cable

1 IR Extender cable with 3 LEDs.

2 RCA cables (white / red / yellow)

1 SCART adapter (labelled Transmitter).

1 SCART adapter (labelled Receiver)

1 User manual

ENGLISH

GIGAVIEW 545

12 3

A/V Transmitter A/V Receiver

14 5

1. Power adapter jack

2. AV jack Transmitter.

3. IR LED Extender jack

4. AV jack Receiver

5. IR Sensor Extender jack

6. Antenna

7. ID code switch, the AV transmitter and AV receiver have to be on

the same channel.

8. LED indicator: POWER

GIGAVIEW 545 3

SETTING UP THE AV TRANSMITTER

1. Connect the RCA cable to the AV jack at the back of the AV

transmitter [2].

2. Connect the other end of the cable to the Audio/Video OUT jacks

of the video source you want to transmit the signal from (e.g.

your VCR, DVD, Satellite or TV: connecting the transmitter to

your VCR or Satellite receiver, allows you to choose channels

independent from your main TV). If your video source is

equipped with a SCART connector use the SCART Adapter

labelled Transmitter.

3. Switch your ID code switch [7] to CH1.

4. Switch the power slide switch to ‘OFF’.

5. Connect the DC plug of the adapter to the DC jack, [1] at the

back of the AV Transmitter and connect the adapter to an outlet.

Only use the supplied power adapter!

6. Switch the power slide switch to ‘ON’.

7. The power LED [8] will go on.

8. Position the AV transmitter in a convenient location, preferably

free on all sides. Make sure the antenna [6] is placed vertical.

ENGLISH

SETTING UP THE AV RECEIVER

1. Connect the RCA cable to the AV jack at the back of the AV

receiver [4].

2. Connect the other end of the A/V cables to your TV. If your TV

has a SCART connector, you may use the SCART adapter provided,

labelled “Receiver”.

3. Switch your ID code switch [7] to CH1.

4. Switch the power slide switch to ‘OFF’.

5. Connect the DC plug of the adapter to the DC jack, [1] at the

back of the AV Receiver and connect the adapter to an outlet.

Only use the supplied power adapter!

6. Switch the power slide switch to ‘ON’.

7. The power LED [8] will go on.

8. Position the AV Receiver in a convenient location, preferably free

on all sides. Make sure the antenna [6] is placed vertical.

GIGAVIEW 545 5

CONNECT IR EXTENDER CABLE &

SENOR (IF NECESSARY)

1. Plug the IR Sensor Extender cable into the IR IN connector [5] on

the GigaView 545 Receiver and place this in sight of the Remote

Control.

2. Plug the IR LED Extender cable into the IR OUT connector [3] on

the GigaView 545 Transmitter. Attach the IR LEDs to the front of

your AV devices. This will now send all received infrared

commands via the IR Sensor Extender cable.

Environmental Information for Customers in the European Union

European Directive 2002/96/EC requires that the equipment bearing this symbol

on the product and/or its packaging must not be disposed of with unsorted

municipal waste. The symbol indicates that this product should be disposed of

separately from regular household waste streams. It is your responsibility to

dispose of this and other electric and electronic equipment via designated

collection facilities appointed by the government or local authorities. Correct disposal and

recycling will help prevent potential negative consequences to the environment and human

health. For more detailed information about the disposal of your old equipment, please contact

your local authorities, waste disposal service, or the shop where you purchased the product.

GIGAVIEW 545 7

ENGLISH

FREQUENTLY ASKED QUESTIONS

I do not get any signal.

xCheck if the units are connected to the mains and if the channel setting

[2] is the same on both units.

xCheck if both units are in the ‘ON’ position [7].

xCheck if the receiving TV is on the correct A/V channel.

The signal received is poor.

xTry another channel (the channel settings must be the same on both

units).

xMove transmitter and/or receiver from the immediate vicinity of the

connected A/V devices. These may affect the range.

xYou are (almost) out of range.

xChanging the position of the transmitter and / or receiver a few

centimetres may rectify the problem.

xTry again with shorter distances.

The images and sound are perfect, but the infrared return signal does

not work.

Check the following:

xDepending on the local situation the A/V signal can reach further than

the signal of the IR receiver. Try again with shorter distances.

xHas the IR emitter been properly connected to the AV transmitter?

xHas the IR emitter been properly placed near the IR window of your A/V

device?

I do get images but no sound.

xThe GigaView 545 can send analogue stereo signals, such as Dolby

Surround. Digital systems such as Dolby 5.1 or Dolby Digital cannot be

transmitted.

Does the GigaView 545TM cause a conflict with my wireless network

(WLAN) ?

xNo, WiFi uses the 2.4Ghz frequency band. The GigaView 545 uses the

5.8GHz frequency band. In cases where a 2.4GHz video transmitter

experiences interference from for instance a WiFi network, the GigaView

545 can be the right solution.

Can I combine multiple receivers?

xYes. However, the signal will be the same on all receivers.

Do you still have questions?

Check out www.marmitek.com for more information.

TECHNICAL DATA

General specifications

Supply voltage: 100 - 240VAC 50/60Hz, 2 x DC

adapter

Operation Frequency Range: 5.725GHz ~ 5.865GHz

Channel Frequency (CH1-CH8) : 5733, 5752, 5771, 5790, 5809, 5828,

5847, 5866MHz

Transmission Range: Up to 100m free field, up to 30m

through walls and ceilings

RF Frequency IR: 433.92 MHz

IR-remote Modulation: ASK

Infrared freq. range: 32 KHz ~38 KHz

Ambient temperature: 10°C~50°C (operation)

-20°C tot +70°C (storage)

AV Transmitter

Supply voltage: DC +9V

Supply Current: 600mA

Transmit power output: 10dBm (CE), 0dBm (FCC)

Modulation: FM (video and audio)

Video Input Level: 1V p-p ᧼75 ohm

Audio Input Level: 1V p-p ᧼600 ohm (STEREO)

Antenna: Omni-directional

IR–remote IR output: 940nm with ON/OFF keying

Dimension: 90mm*60mm*22mm

Weight: 82g

AV Receiver

Supply voltage: DC +9V

Supply Current: 600mA

Sensitivity: -80dBm MIN.

Video Output Level: 1±0.2V p-p ᧼75 ohm

Audio Output Level: 1±0.2V p-p ᧼600 ohm (STEREO)

Antenna: Omni-directional

Dimension: 90mm*60mm*22mm

Weight: 95g

Specifications may be modified without prior notice.

Tabla de contenidos

Idiomas:

Otros manuales de Receptor de Marmitek

Marmitek

Marmitek BOOMBOOM 75 Manual de usuario

Marmitek

Marmitek TV Anywhere 5.8GHz Manual de usuario

Marmitek

Marmitek Invisible Scart 200 Manual de usuario

Marmitek

Marmitek Audio Anywhere 725 Manual de usuario

Marmitek

Marmitek BOOMBOOM 100 Manual de usuario

Marmitek

Marmitek IR Control Pro System 3099T Manual de usuario

Marmitek

Marmitek GigaVideo 580 Manual de usuario

Marmitek

Marmitek Gigavideo 50 Manual de usuario

Marmitek

Marmitek UM7206 X-10 Manual de usuario

Marmitek

Marmitek Boomboom 90 Manual de usuario

Marmitek

Marmitek GIGAVIEW 821 Manual de usuario

Marmitek

Marmitek POWERMID XL Manual de usuario

Marmitek

Marmitek TV Anywhere 5.8GHz Manual de usuario

Marmitek

Marmitek 20095 Manual de usuario

Marmitek

Marmitek IRC Reiceiver 3060P Manual de usuario

Marmitek

Marmitek Audio Anywhere 630 Manual de usuario

Marmitek

Marmitek boomboom 77 Manual de usuario

Marmitek

Marmitek iParty Manual de usuario

Marmitek

Marmitek 20014 POWERMID XL Manual de usuario

Marmitek

Marmitek POWERMID XL Manual de usuario

Marmitek

Marmitek BOOMBOOM 75 Manual de usuario

Marmitek

Marmitek Powermid XS Manual de usuario

Marmitek

Marmitek TVAW4K RX Manual de usuario

Marmitek

Marmitek GIGAVIDEO 45 Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario