Lucent Technologies CBX 500 Manual de usuario

Beta Draft Confidential

CBX 500

Multiservice WAN Switch Hardware

Installation Guide

Product Code: 80011

Revision 10

April 2003

ii4/5/03 CBX 500 Multiservice WAN Switch Hardware Installation Guide

This material is protected by the copyright laws of the United States and other

countries. It may not be reproduced, distributed, or altered in any fashion by any entity

(either internal or external to Lucent Technologies), except in accordance with

applicable agreements, contracts or licensing, without the express written consent of

Lucent Technologies.

For permission to reproduce or distribute, please contact: Technical Publications,

Integrated Network Solutions/Core Switching Division at 978-692-2600.

Notice. Every effort was made to ensure that the information in this document was

complete and accurate at the time of printing. However, information is subject to

change.

Interference Information: Part 15 of FCC Rules. This equipment has been

tested and found to comply with the limits.

Trademarks. NavisXtend and NavisCore are trademarks of Lucent Technologies.

IP Navigator, Navis, CBX 500, GX 550, and B-STDX 9000 are registered trademarks

of Lucent Technologies. Other trademarks and trade names mentioned in this

document belong to their respective owners.

Limited Warranty. Lucent Technologies provides a limited warranty to this

product. For more information, see the hardware license agreement in this document.

Ordering Information. To order copies of this document, use the online ordering

instructions presented later in this guide.

Support Telephone Numbers. For technical support and other services, see the

customer support contact information in the “About This Guide” section of this

document.

CBX 500 Multiservice WAN Switch Hardware Installation Guide 4/5/03iii

Beta Draft Confidential

LUCENT TECHNOLOGIES LIMITED WARRANTY ON HARDWARE

Lucent Technologies warrants the CBX 500 against defects in materials and

workmanship for a period of one year from the date of shipment. During the warranty

period, Lucent will, at its option, repair, replace, or refund the purchase price of any

defective product at no additional cost, provided you return it during the warranty

period, transportation charges prepaid, to Lucent. You must attach your name, address

and telephone number, a description of the problem(s), and a dated proof-of-purchase

bearing the serial number of each product returned for warranty service.

This warranty is limited to the original purchaser of the product and is not transferable

unless otherwise agreed by Lucent in writing. This warranty does not apply if the

product: has been damaged by accident, abuse, misuse or misapplication; has been

modified without written permission by Lucent; or if any Lucent serial number has

been removed or defaced.

UNDER NO CIRCUMSTANCES SHALL LUCENT’S LIABILITY ARISING OUT OF OR IN

CONNECTION WITH THE PRODUCT OR THE USE OF, OR INABILITY TO USE, THE PRODUCT

IN TORT (INCLUDING NEGLIGENCE), OR OTHERWISE, EXCEED THE PURCHASE PRICE OF

THE PRODUCT. LUCENT MAKES NO WARRANTY OR REPRESENTATIONS, EITHER

EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCT, ITS QUALITY,

PERFORMANCE, MERCHANTABILITY, OR FITNESS IN A PARTICULAR PURPOSE.

ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE

OF ORIGINAL PURCHASE OF THE PRODUCT.

THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF

ALL OTHERS, ORAL OR WRITTEN, EXPRESSED OR IMPLIED. No Lucent dealer, agent, or

employee is authorized to make any modification, extension, or addition to this

warranty.

LUCENT IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY LEGAL

THEORY, INCLUDING LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR

REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COST OF RECOVERING,

REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED

WITH LUCENT’S PRODUCTS.

Some states do not allow the exclusion of implied warranties or liability for incidental

or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights

which vary from state to state.

iv4/5/03 CBX 500 Multiservice WAN Switch Hardware Installation Guide

Beta Draft Confidential

LUCENT TECHNOLOGIES LIMITED WARRANTY ON MEDIA AND

DOCUMENTATION

Lucent Technologies also warrants that the media on which the Software is distributed

and the Documentation are free from defects in materials and workmanship. Lucent

will replace defective media or documentation, provided you return the item with

dated proof of purchase to Lucent within 90 days of the date of delivery.

FEDERAL COMMUNICATIONS COMMISSION WARNING

This device complies with Part 15 of the FCC Rules and Regulations. Operation is

subject to the following two conditions:

This device may not cause harmful interference, and

This device must withstand any interference received, including interference that may

cause undesired operation.

The CBX 500 has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules and Regulations. These limits are

designed to provide reasonable protection against harmful interference when this

equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio-frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio and television

communications. Operation of this equipment in a residential area is likely to cause

interference in which case the user will be required to correct the interference at his or

her own expense.

Shielded cables must be used with this unit to ensure compliance with the FCC Class

Alimits.

Do not attempt to repair or modify this equipment. Any repairs to the unit must be

performed by Lucent Technologies or a Lucent-authorized representative.

CBX 500 Multiservice WAN Switch Hardware Installation Guide 4/5/03v

Beta Draft Confidential

Maintenance Agreements

Lucent offers a comprehensive program to provide hardware support, a 24-hour

emergency hotline, overnight parts replacement, and an escalation procedure.

Non-contract maintenance services are provided at current time-and-materials rates.

For more information, contact Lucent Technical Assistance Center (TAC) at

1-866-LUCENT8 (in the U.S.). For international telephone numbers see “Technical

Support” in “About This Guide.”

Lucent has adopted a maintenance strategy based on customer-initiated requests to the

Lucent TAC. The TAC coordinates all customer services, including hardware and

software technical support, on-site service requirements, and module exchange and

repair.

If the Product Is Damaged

If any portion of the switch is damaged, forward an immediate request to the delivering

carrier to perform an inspection of the product and to prepare a damage report. Save

the container and all packing materials until the contents are verified.

Concurrently, report the nature and extent of the damage to the Lucent TAC so that

action can be initiated, either to repair or replace the damaged items.

Do not return any items to Lucent until you obtain instructions from a TAC

representative. Report the problem or deficiency to the TAC representative, along

with the model, type, and serial number. Upon receipt of this information, Lucent will

provide you with service instructions, or a Return Authorization Number and shipping

information. All items returned under warranty must be shipped to the manufacturer

with the charges prepaid.

vi4/5/03 CBX 500 Multiservice WAN Switch Hardware Installation Guide

Beta Draft Confidential

If Problems Arise

If any of your telephone equipment is not operating properly, you should immediately

remove it from your telephone line, as it may cause harm to the telephone network. If

the telephone company notes a problem, they may temporarily discontinue service.

When practical, they notify you in advance of this disconnection. If advance notice is

not feasible, you will be notified as soon as possible. When you are notified, you will

be given the opportunity to correct the problem and informed of your right to file a

complaint with the FCC.

In the event that repairs are ever needed on this equipment, they should be performed

by Lucent Technologies or an authorized Lucent representative. For information

contact the Lucent TAC at 1-866-LUCENT8 (in the U.S.). For international telephone

numbers see “Technical Support” in “About This Guide.”

CBX 500 Multiservice WAN Switch Hardware Installation Guide vii

Beta Draft Confidential

Contents

Maintenance Agreements..............................................................................................v

If the Product Is Damaged.............................................................................................v

If Problems Arise...................................................................................................vi

About This Guide

What You Need to Know...........................................................................................xxi

Reading Path .............................................................................................................xxii

Documentation for New Modules .....................................................................xxiii

How to Use This Guide............................................................................................xxiii

What’s New in This Guide?.....................................................................................xxiv

Conventions...............................................................................................................xxv

Related Documents ..................................................................................................xxvi

Lucent................................................................................................................xxvi

Ordering Printed Manuals Online...........................................................................xxvii

Customer Comments...............................................................................................xxvii

Technical Support ...................................................................................................xxvii

Chapter 1 Overview

CBX 500 Product Description ...................................................................................1-1

CBX 500 Features......................................................................................................1-2

Hardware Component Descriptions...........................................................................1-4

SP Modules..........................................................................................................1-7

SP Features....................................................................................................1-7

SP Redundancy.............................................................................................1-7

IOP Modules (IOPs)............................................................................................1-8

I/O and SP Adapters (IOAs and SPAs)...............................................................1-9

viii4/5/03 CBX 500 Multiservice WAN Switch Hardware Installation Guide

Contents

Chapter 2 Specifications and Safety Warnings

Electronic/Electrical Requirements...........................................................................2-2

Physical Specifications..............................................................................................2-3

Site Specifications .....................................................................................................2-4

Operating Environment.......................................................................................2-4

Space Requirements............................................................................................2-4

DC Power Supply Warnings......................................................................................2-5

Safety Warnings.........................................................................................................2-5

Signes Précurseurs de Sécurité...........................................................................2-7

Achtung: Zusätzliche Sicherheitshinweise.........................................................2-8

Power Cord Requirements.........................................................................................2-9

Chapter 3 Preparing for the Installation

Selecting the Installation Site ....................................................................................3-1

Checking the Switch for Damage..............................................................................3-2

Moving the Switch to the Installation Site ................................................................3-3

Unpacking the Switch................................................................................................3-3

Unpacking the Accessory Kit....................................................................................3-4

Verifying the Hardware Configuration......................................................................3-5

Before Handling Equipment ...............................................................................3-5

Checking the SP and IOP Modules.....................................................................3-5

Checking the SPA and IOA Modules .................................................................3-7

Checking the PCMCIA Configuration................................................................3-8

What’s Next?.............................................................................................................3-9

Chapter 4 Installing the CBX 500 Switch

Before You Begin......................................................................................................4-1

Required Installation Tools and Equipment..............................................................4-2

Setting Up the Switch................................................................................................4-3

As a Free-Standing Switch..................................................................................4-3

As a Rack-Mounted Switch ................................................................................4-3

Installing 19-inch Mid-Mount Brackets.......................................................4-4

Installing 23-inch Mid-Mount Brackets.......................................................4-5

Installing 23-inch Front-Mount Brackets.....................................................4-6

Installing the Switch into the Cabinet...........................................................4-8

Connecting Cables to the Switch...............................................................................4-9

Network Management Connections....................................................................4-9

Beta Draft Confidential

CBX 500 Multiservice WAN Switch Hardware Installation Guide 4/5/03ix

Contents

Connecting the Console ...........................................................................................4-10

Setting Up the NMS.................................................................................................4-11

Connecting the NMS.........................................................................................4-11

Using Direct Ethernet..................................................................................4-13

Using Indirect Ethernet...............................................................................4-14

Using Management VC/PVC......................................................................4-15

Connecting External Clock Inputs and Outputs.......................................................4-16

T1 Clock Connection.........................................................................................4-16

E1 Clock Connection.........................................................................................4-17

Connecting External T1 Clock Source Inputs/Outputs .....................................4-18

Connecting Alarm Relays........................................................................................4-19

Connecting a Remote Alarm .............................................................................4-20

G.703 Product Attachment Information...................................................................4-21

Chapter 5 Determining the Operating Status

Before You Begin ......................................................................................................5-1

Status LEDs................................................................................................................5-2

Switch Status LEDs.............................................................................................5-2

Module Status LEDs............................................................................................5-3

Port Alarm LEDs.................................................................................................5-3

Redundancy Status LEDs....................................................................................5-4

PCMCIA Status LEDs.........................................................................................5-5

Power Supply Status LEDs..................................................................................5-6

DC Power Failures - LED Status..................................................................5-6

Evaluating Power Loads for a Two-Power Supply Switch........................................5-7

Calculating Power Consumption.........................................................................5-7

Connecting Power to the Switch................................................................................5-9

Switches with AC Power Supplies......................................................................5-9

Switches with DC Power Supplies....................................................................5-11

Powering Up the Switch...........................................................................................5-14

What’s Next?............................................................................................................5-15

Chapter 6 Installing and Removing Modules

Installation and Removal Precautions........................................................................6-2

Parts Repair..........................................................................................................6-2

Static Protection...................................................................................................6-2

Electrical Energy Hazard.....................................................................................6-2

Switch Processor Module...........................................................................................6-3

x4/5/03 CBX 500 Multiservice WAN Switch Hardware Installation Guide

Contents

Removing an SP Module ....................................................................................6-3

Installing an SP Module......................................................................................6-5

Installing a Redundant SP...................................................................................6-6

Replacing the SPA Module .......................................................................................6-8

Removing and Replacing PCMCIA Cards..............................................................6-12

Installing or Replacing IOA Modules......................................................................6-14

Installing IOA Modules.....................................................................................6-16

Replacing IOA Modules ...................................................................................6-17

Installing and Replacing IOP Modules....................................................................6-18

IOP Slots According to SP Model Number ......................................................6-18

Redundant IOP Modules...................................................................................6-20

Installing a New IOP Module ...........................................................................6-21

Installing a New IOA Module....................................................................6-21

Installing a New IOP Module.....................................................................6-22

Replacing an IOP Module.................................................................................6-23

Installing or Replacing Power Supplies...................................................................6-25

Removing a Power Supply................................................................................6-28

Installing a Power Supply .................................................................................6-29

Replacing the Cooling Fan Module.........................................................................6-33

Removing the Cooling Fan Module..................................................................6-34

Installing the Cooling Fan Module ...................................................................6-35

Installing or Replacing Air Filters...........................................................................6-36

Chapter 7 Troubleshooting

Power-up Diagnostics for SP and IOP Modules........................................................7-2

Switch Troubleshooting.............................................................................................7-3

IOP Module Troubleshooting....................................................................................7-4

Power Supply Troubleshooting .................................................................................7-5

Appendix A IOP and IOA Module Specifications

8-port T1 and E1 IOP Modules ................................................................................A-2

Specifications.....................................................................................................A-2

Physical Dimensions....................................................................................A-2

Power Requirements....................................................................................A-2

Agency Approvals.......................................................................................A-2

Temperature Range......................................................................................A-3

Physical Interfaces.......................................................................................A-3

Physical Connectors (T1) ............................................................................A-3

Otros manuales para CBX 500

Tabla de contenidos

Otros manuales de Cambiar de Lucent Technologies

Lucent Technologies

Lucent Technologies Cajun P333T Manual de usuario

Lucent Technologies

Lucent Technologies CAJUN P120 Manual de usuario

Lucent Technologies

Lucent Technologies MAX 3000 Manual de usuario

Lucent Technologies

Lucent Technologies 4ESS Manual de usuario

Lucent Technologies

Lucent Technologies LambdaUnite Manual de usuario

Lucent Technologies

Lucent Technologies GX 550 Manual de usuario

Lucent Technologies

Lucent Technologies ED83134-30 Manual de usuario

Lucent Technologies

Lucent Technologies LambdaUnite Manual de usuario

Lucent Technologies

Lucent Technologies Cajun P220 Manual de instrucciones

Lucent Technologies

Lucent Technologies A500 Manual de usuario

Lucent Technologies

Lucent Technologies CBX 3500 Manual de usuario

Lucent Technologies

Lucent Technologies Cajun P333T Manual de usuario

Lucent Technologies

Lucent Technologies Cajun P550 Guide Manual de instrucciones

Lucent Technologies

Lucent Technologies OptiStar EdgeSwitch Manual de usuario

Lucent Technologies

Lucent Technologies Cajun P220 Manual de usuario

Lucent Technologies

Lucent Technologies Stinger Compact Remote Manual de usuario

Lucent Technologies

Lucent Technologies 5ESS Manual de usuario

Lucent Technologies

Lucent Technologies 4ESS Manual de usuario

Lucent Technologies

Lucent Technologies GX 550 Manual de usuario

Lucent Technologies

Lucent Technologies Lucent Compact Switch Manual de usuario

Lucent Technologies

Lucent Technologies Cajun P333T Manual de usuario

Lucent Technologies

Lucent Technologies LambdaUnite MSS Manual de usuario

Lucent Technologies

Lucent Technologies B-STDX Manual de usuario

Lucent Technologies

Lucent Technologies GX 550 ES Manual

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario