Lorex L15LD400 series Manual de usuario

HOME & BUSINESS SECURITY

WWW.LOREXCCTV.COM

INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. AS OUR PRODUCTS ARE SUBJECT TO CONTINUOUS

IMPROVEMENT, LOREX TECHNOLOGY AND OUR SUBSIDIARIES RESERVE THE RIGHT TO MODIFY PRODUCT DESIGN, SPECIFICATIONS

L15LD400Series

Quick Start Guide

L15LD400 Series Quick Set-Up Guide R2

PACKAGE CONTENTS AND

INSTALLATION GUIDE:



RECOMMENDED

TIPS:

Check Pages 9 and 10 for

recommended tips .

ATTENTION:

Broadband Router and

Computers are required

(for local and remote

monitoring), not included.

INSTRUCTIONS:

For detailed setup

information, please

refer to your User’s

manual.

SOFTWARE

REQUIREMENTS:

For Lorex Client 2.0

Software requirements,

please refer to Page 9 of

this guide.

System Contents:

1 - 15” 4 Channel LCD Monitor with 160GB HDD

1 - 10 ft Ethernet Cable

1 - Remote Control

2 - AAA Batteries

1 - Power Adaptor (for monitor)

1 - 4 in 1 Power Adaptor (for cameras)

1 - Lorex Client 2.0 Software CD

1 - PS2 Mouse

4 - Color CCD IR Cameras

4 - 60 ft Extension Cables

4 - Metal Camera Stands with Mounting Screws

1 - User’s Manual

1 - Software Manual

1 - Quick Start Guide

INSTALLATION GUIDE

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Time Tools Skills - Easy

Under 10 Minutes* Hand Tools Plug & Play connectors,

On screen set up

* Installation time may vary based on

application and camera cabling

STEP 1 STEP 2

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Time Skills - Intermediate

Plug & Play connectors,

On screen set up

Under 30 Minutes*

* Installation time may

vary based on application

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Hardware

Computer &

Router*

* Minimum System Requirement: Windows XP,

Pentium IV, 256MB Ram (512MB Recommended),

200MB Storage, Internet, DSL or Cable Modem

STEP 3

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Time Hardware Skills - Advanced

60 Minutes Computer &

Router*

Basic Computer

Skills, Router Port

Forwarding

* Installation time may vary

based on application

Skill Level

Intermediate

easy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

* Minimum System Requirement: Windows XP,

Pentium IV, 256MB Ram (512MB Recommended),

200MB Storage, Internet, DSL or Cable Modem

L15LD400 Series Quick Set-up Guide R2

STEP 1 - SET UP YOUR MONITOR FIRST

Congratulations! You have completed Step 1 successfully. You can now view, record

and playback images on your monitor.

Connect the ﬁrst camera to the CH1 input. Follow the same steps to connect the

additional cameras.

CONNECT CAMERAS TO THE MONITOR:

Connect one end of the ethernet cable to one of the router’s (not included) LAN

PORTS and the other end to Monitor’s Network Port located at the bottom of the

monitor. See picture below showing a generic LAN/WAN connection.

CONNECT ETHERNET CABLE:

Connect the 6 PIN end of the Mouse included with your system to the PS2 port of

the monitor.

CONNECT THE MOUSE:

WAN (WIDE

AREA NETWORK)

LAN (LOCAL AREA NETWORK)

TO YOUR COMPUTER

TO YOUR MONITOR

BACK OF THE ROUTER SHOWN



MOUSE CONTROL

AVAILABLE

1. Connect the Female BNC end of the supplied 60’ extension cable to the camera.

Connect the male Power end of the extension cable to the camera.

2. Connect the Female end of the supplied 60’ extension cable to an open BNC

camera input on the back of the System. Connect the female Power end of the

extension cable to one of end of the 4 in one power adaptor.

Connect one end of the Power adaptor to the monitor, the other end to an electrical

outlet. This unit powers ON once it is plugged in to the power outlet.

** After you see all four (4) camera images on your monitor screen, remove the

protective ﬁlm from camera(s) and monitor screen.

CONNECT POWER CABLE:

1. Press the MENU button from the Front Panel of the Monitor (or Remote Control), or use the

Mouse and Click the Menu Icon located at the bottom of the monitor screen (Show and

hide screen becomes available when the Mouse pointer is placed at the bottom of the Monitor).

2. DVR LOG IN screen appears soon after the Menu button is pressed asking for a password.

Note: USER ID BY DEFAULT IS ADMIN. Password is numeric and not necessarily needed for

initial MENU setup. Press ENTER to enter the MAIN MENU.

3. On the MENU screen select CONFIGURATION and click ENTER.

4. Select TIME AND DATE SETUP to change or alter the factory default settings and press ESC to

exit this menu.

SET THE TIME AND DATE:

Make sure that

the Date and Time

are set prior to

recording.

IMPORTANT NOTE: The ends of the extension cable are NOT

the same - one end has a Male power port, and the other has

a Female power port. Before permanently running the Camera

Extension Cable, make sure that the cable has been oriented

between the Camera and the unit correctly

L15LD400 Series Quick Set-Up Guide R2

1. Access the Main Menu Setup screens, and navigate to the SYSTEM

MENU - EXTERNAL DEVICE - TCP/IP SETUP - IP SETUP option.

2. Record the MAC Address of your system. This information is NECESSARY

for the DDNS Setup process.

3. Conﬁrm that the DHCP MODE is set to AUTOMATIC. This will allow your

system to lease an IP ADDRESS from your router. If the system not set to

AUTOMATIC, change the setting and click IP DETECT - the system will

obtain an IP address.

4. The IP PORT is 50000 by default. The IP Address, Gateway and Subnet are

assigned to your system by your router. If the settings are not displayed,

and the unit is set to DHCP MODE: AUTOMATIC, you may need to click IP

DETECT - the system will obtain an IP address.

STEP 2 - SET UP LOCAL VIEWING ON YOUR PC

RETRIEVE SYSTEM INFORMATION:

RECORD THE IP AND MAC ADDRESSES IN THE SECTION BELOW:

Insert the Lorex Client 2.0 Software CD into your local computer’s

CD ROM drive and proceed with the installation.

INSTALL SOFTWARE:

(on your local computer)

Follow the installation screens to complete Lorex Client 2.0

Software installation.

LOREX CLIENT 2.0 SOFTWARE:

(on your local computer)

Close the CD Menu Screen. A Lorex Client Icon will appear on your

desktop.

LOREX CLIENT 2.0 SOFTWARE:

(on your local computer)

*YOUR OBSERVATION SYSTEM MUST

BE CONNECTED TO A ROUTER PRIOR TO

POWERING IT ON.

IP ADDRESS: . . .

MAC ADDRESS:

(Required for DDNS registration)

For Lorex Client Software

requirements, please refer to

Page 9 of this guide.

2 3 4 5

Double-click the Lorex Client 2.0 Software icon on your desktop to run the

program.

RUN THE LOREX CLIENT 2.0 SOFTWARE:

(on your local computer)

NOTE: The system will lease networking

information from your Router. If you wish

to set your information manually, then

set the DHCP MODE to MANUAL. Please

consult your Hardware Manual for further

Menu options.

L15LD400 Series Quick Set-up Guide R2

STEP 2 - SET UP LOCAL VIEWING ON YOUR PC

CONTINUED

Click the SETUP button from the Lorex Client 2.0 Software Screen.

SET-UP:

(on your local computer for local viewing)

1. Select the IP/PORT Tab.

2. Click MANUAL (for local viewing).

3. NAME: Enter a name for the system. E.g. Ofﬁce

4. ADDRESS: Add the IP address recorded earlier at Step 2 - 1

5. PORT: By default is set to 50000

6. USER ID: By default is admin

7. PASSWORD: Leave it blank

8. Press SAVE to add the system name you have created.

LOREX CLIENT 2.0 REMOTE ACCESS SETUP

(on your local computer for local viewing):

From the Lorex Client 2.0 software - local conﬁguration screen (as shown in the pic-

ture), press the Connect button to connect to Local Live site to view your cameras.

VIEW CAMERAS LOCALLY:

(on your local computer for local viewing):

Congratulations! You have completed Step 2 successfully.

You can now view and playback images on your local

computer over the Local Area Network (LAN).

L15LD400 Series Quick Set-Up Guide R2

STEP 3 - SET UP INTERNET REMOTE SECURITY

MONITORING

PORT FORWARD YOUR ROUTER:

Open your web browser (Internet Explorer by default) and enter

http://www.lorexddns.com in the address bar.

DDNS SET-UP:

Port forward your router ﬁrst before proceeding with the set-up (port

50000).

All routers are different. To port forward your router, please refer to

your router’s user manual.

A router conﬁguration guide is available on your Lorex Client Software

CD and also on www.lorexcctv.com/support in the Consumer’s Guide

Section.

DDNS REGISTRATION:

Select the REGISTER option from the list on the left side of the

screen.

Complete the NEW USER ﬁelds with your personal information:

• USER NAME - Enter the desired User Name for connection.

• USER PASSWORD / CONFIRM PASSWORD - Enter and conﬁrm a

password for the connection.

NOTE: The username and password provided are NOT the same as the ADMIN/

PASSWORD on the Observation System. These credentials are used for your

speciﬁc connection to your unit.

• EMAIL - Enter your Email Address.

Press the OK button to save the settings.

A Successful Registration window will appear.

CREATE NEW USER INFORMATION:

L15LD400 Series Quick Set-up Guide R2

STEP 3 - SET UP INTERNET REMOTE SECURITY

MONITORING

Once the account has been created, you will need to login using your

credentials (as set in step 4).

Once the Username and Password have been entered, press the LOG IN button to

access the Conﬁguration Menu.

Select the ADD DVR link from the top of the page.

ADD DVR:

The DVR Setup screen will appear:

• DVR NAME - Enter the desired name for your Observation System (e.g.

MyBusiness) to a maximum of 20 numbers and letters.

• MAC ADDRESS - Enter the MAC Address from the system (as retrieved

from the System Information in the IP & MAC Address section on page 4). The

MAC ADDRESS IS 12 CHARACTERS WITH NO SPACES OR DASHES.

• IP ADDRESS & PORT - This information can be left blank - the DDNS Service

will access your unit based on the MAC Address.

Press OK to save the settings. Once the settings are saved, the conﬁguration will

appear in your DDNS List. This conﬁguration can now be added to the Observation

System.

Access the Main Menu Setup screens, and navigate to the SYSTEM MENU

- EXTERNAL DEVICE - TCP/IP SETUP - DDNS SETUP option.

ENTER DDNS SET-UP ON YOUR MONITOR:

L15LD400 Series Quick Set-Up Guide R2

STEP 3 - SET UP INTERNET REMOTE SECURITY

MONITORING

• Set the DDNS ENABLE to ON

• Click on REGISTER

The following will automatically complete after clicking the Register option:

• DNS SERVER - Conﬁrm that the IP address is set to 202.133.244.128

• INTERVAL - Set an interval for the DVR to auto-update its IP address to DDNS server (D-

days / H- hours / M- minutes).

• REGISTER - Connect to the DDNS server and register the DVR information to DDNS database

• DNS STATUS - Indicates the current status of DDNS connection.

• IP ADDRESS - Indicates the local IP address assigned by the router (the internal IP address of

your system).

• IP PORT - Indicates the current port number in the system (50000 by default).

• REMAIN TIME - Indicate the remaining time until the System next updates the IP address with

the DDNS Service.

• LAST REGISTRATION DATE - Indicates the last successful date and time that an update

occurred. Save the changes, and exit from the menu.

ENABLE DDNS SETTINGS:

CONTINUED

The remote connection information needs to be added to the Lorex Client software to allow

for a remote connection (using DDNS).

LOREX CLIENT 2.0 REMOTE ACCESS SETUP:

1. Load the Lorex Client 2.0 Software. Click on SETUP to add the conﬁguration.

2. The Remote Viewer Setup window will load to the IP/PORT Tab. Click on the DDNS option

(all settings will be greyed out).

3. Enter your DDNS Information as follows:

• USER NAME - Enter the user name you conﬁgured on the DDNS Website (default is set to

GROUP as an example, and can be deleted).

• DVR NAME - Enter the DVR name you conﬁgured on the DDNS Website.

4. Click the SAVE Button to accept the settings.

5. Click on the GET IP button to retrieve the IP Address and Port Number from the DDNS

Server.

6. Enter the USER ID AND PASSWORD for the Observation System:

• USER ID - admin (default)

• PASSWORD - leave blank (default)

NOTE: It is highly recommended that you change the System password. Please refer to

your Hardware Manual for menu settings.

7. Press OK to save the settings, and close the conﬁguration window.

Remote Viewing with Internet Explorer: Video from the Observation System can be viewed using the

Internet Explorer interface (for remote viewing and backup). All Remote functionality through the Internet

Explorer interface is provided at http://www.lorexddns.com. For more information, please refer to Lorex

Client 2.0 Software Manual.

Congratulations! You have completed Step 3 successfully. You can

now view and playback images on your remote computer over the

Internet.

10 Click the CONNECT button to remotely access your Observation System.

MyBusiness

VIEW CAMERAS REMOTELY:

L15LD400 Series Quick Set-up Guide R2

RECOMMENDED TIPS

PTZ

1234FULL SCREEN CH 1 ~4

QUAD MODE

TO PAN/TILT/ZOOM

CAMERA

TO VIEW IMAGE IN PICTURE

IN PICTURE MODE

ZOOM

PLAY IN SEQUENCE

OPENS SEARCH WIN-

DOW

QUICK PLAYBACK

Tilt the monitor UP to loacte your

monitor’s connections.

LOCATE MONITOR CONNECTIONS:

FUNCTION ICONS - AVAILABE FOR USE

ONLY THROUGH A MOUSE

LOREX CLIENT 2.0 SOFTWARE REQUIREMENTS:

The Lorex Client 2.0 software (included with the

Observation System) has the following installation

requirements:

MiniMuM SySteM RequiReMentS:

OPERATING SYSTEM: Windows 2000, Windows XP

Home Edition, Windows XP Professional

PROCESSOR: Pentium 4 - 1.5 GHz Processor (or

equivalent)

MEMORY: 256 MB RAM

HARD DRIVE: 50 MB - Installation space required.

* Additional Hard Drive space required for recording.

Recorded ﬁle size will vary depending on recording

quality settings

RecoMMended SySteM RequiReMentS:

OPERATING SYSTEM: Windows XP Home Edition,

Windows XP Professional

PROCESSOR: Pentium 4 / 3 GHz Processor (or

equivalent)

MEMORY: 1024 MB RAM

Hard Drive: 50 MB - Installation space required

* Additional Hard Drive space required for recording.

Recorded ﬁle size will vary depending on recording

quality settings

** Requires a high speed internet connection

(minimum upload speed: 256Kb/s, download speed

512Kb/s) and a broadband router – not included.

Typical network remote viewing at 1-2 FPS.

Please refer to the Lorex Client V2 Software

User Guide included with your Observation

System for further details.

Visit the Lorex support website at http://www.

lorexcctv.com for information on Windows

Vista compatibility.

Function icons can be located at the

bottom of the Monitor screen (as

shown above). A Show and Hide

screen readily becomes available

when the Mouse pointer is pointed to

the bottom of the Monitor.

L15LD400 Series Quick Set-Up Guide R2

FORMATTING THE NEW HARD DRIVE:

The New Hard Drive MUST be formatted. If a new HARD DRIVE is

detected, the system will prompt you to FORMAT the drive. Please

refer to the system’s user manual for HDD installation.

HDD INSTALLATION:

The System comes with a pre-installed Hard Drive, however

the unit will work with a replacement single Hard Drive (up to

400GB).

NOTE: Make sure that the System is OFF and the power cable has been

disconnected before changing the Hard Drive. For detailed instructions,

check your user’s manual included with the system.

TIP ON CAMERA MOUNTING:

Note: Test the cameras prior to selecting a permanent mounting

location by temporarily connecting the Cameras and Cables to

your L15LD400 DVR Combo System.

Pre-installed

160 GB HDD

SETTING THE NEW DRIVE TO MASTER:

• Refer to the General Jumper Pin Setting on HDD Surface (generally

located on a sticker on the top of the drive).

• Set the Jumper Pin Set to Master (1 Drive). NOTE: Use a Hard Drive

Model with a power supply rated UDMA66 or higher.

CONNECTING THE IDE CABLE:

• Conﬁrm the IDE Cable is securely connected within the System.

RECOMMENDED TIPS CONTINUED

NOTE: You must have an active internet connection to the

Observation System to be able to perform Remote viewing or

playback. Remote access is dependant on your connection

speed, internet trafﬁc and other network factors - the speed is

normally 1~2 FPS (frames per second).

For faster playback, it is recommended to download previously

recorded video using the backup function and play it back using

Backup Player 2.0 Software - refer to the user manual for details.

Regardless of the network playback speed, video is being

recorded on your system in real time, and can be viewed when

you are at the system or through the backup player.

TIP ON REMOTE VIEWING AND PLAYBACK:

Otros manuales para L15LD400 series

Tabla de contenidos

Otros manuales de Sistema de seguridad de Lorex

Lorex

Lorex SG21FD3044-161 Manual de usuario

Lorex

Lorex LHB800 Series Manual de usuario

Lorex

Lorex LW2310 Series Manual de usuario

Lorex

Lorex LW491HD Manual de usuario

Lorex

Lorex LW2702 series Manual de usuario

Lorex

Lorex LW2902 Manual de usuario

Lorex

Lorex lx4471w Manual de instrucciones

Lorex

Lorex L154-81C4 Manual de usuario

Lorex

Lorex L19LD800 Series Manual de usuario

Lorex

Lorex LW2700 SERIES Manual de usuario

Lorex

Lorex SG17LD800 Manual de usuario

Lorex

Lorex LHB806 Manual de instrucciones

Lorex

Lorex SG21CD7444UQ-A80 Manual de usuario

Lorex

Lorex L19LD800 Series Manual de usuario

Lorex

Lorex SG6331 Manual de usuario

Lorex

Lorex HC64A Series Manual de usuario

Lorex

Lorex L15LD420 SERIES Manual de usuario

Lorex

Lorex LHB900 Series Manual de usuario

Lorex

Lorex LW2960 SERIES Manual de usuario

Lorex

Lorex SG21CD7484UQ-A80 Manual de usuario

Lorex

Lorex SG15F6584 Manual de usuario

Lorex

Lorex LH314321 Guía

Lorex

Lorex SHS-2S7LD Series Manual de usuario

Lorex

Lorex LWB4800 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario