Lippert Curt 13496 Manual de usuario

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •13496-INS-RA •12/13/2021 •ECN9115 •PAGE 1

Product Registration and Warranty

CURT stands behind our products with industry-leading warranties. To get copies of the product

warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys

Weight Carrying Capacity

Gross trailer weight (GTW) 2,000 lbs.

Tongue weight (TW) 200 lbs.

INSTALLATION MANUAL 13496

Tools Required

Ratchet Fishwire, 1/2"

(includes 4 qty)

Socket, 3/4" Tape measure

6" Socket extension Die grinder

Torx bit, T-10, T-25 Tape

Torque wrench Reciprocating saw/

Rotary tool

* For a tools reference guide visit

curtmfg.com/trailer-hitch-installation

Level of Difficulty

Moderate

Installation difficulty levels are based on time

and effort involved and may vary depending on

the installer level of expertise, condition of the

vehicle and proper tools and equipment.

WARNING

Never exceed the vehicle manufacturer's recommended towing capacity.

SAFETY INSTRUCTIONS

Safety glasses should be worn at all times while installing this product.

NOTICE

Visit www.curtmfg.com for a full-color copy of this

instruction manual, as well as helpful videos, guides and much more!

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

This installation requires:

• Part removal and trimming of the underbody panel

Periodic inspection of the trailer hitch should be performed to ensure all

mounting hardware remains tight and structural components are secure.

To help prevent damage to the product or vehicle, refer to the specified

torque specifications when securing hardware during the installation process.

CAUTION

Use caution when trimming lower fascia

Parts List

Item Qty Description

1 4 Carriage bolt, 1/2-13" UNC,

1-1/4", grade 8

2 4 Serrated flange nut,

1/2"-13 UNC, grade 8

3 4 Square hole spacer,

1/4" x 1" x 3"

Product Photo

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •13496-INS-RA •12/13/2021 •ECN9115 •PAGE 2

ASSEMBLY

HOLE ENLARGEMENT

Attach the ﬁshwire to

the carriage bolt and

slide the spacer onto

the ﬁshwire.

Push the bolt through

the hole followed by

the spacer, as shown.

Pull the bolt back into

position, protruding

from the frame.

REVERSE PULL FISHWIRE TECHNIQUE

Insert coiled end of ﬁshwire tool through hitch

mounting hole in vehicle frame rail and out the

access hole. Pass coiled end of ﬁshwire

through spacer and thread bolt into

coil. Kink wire to keep spacer

seperate from bolt as shown.

Pull ﬁshwire, spacer and

bolt through frame and

out mounting hole. Use

ﬁshwire to guide hitch during mounting and

prevent loss of bolt or spacer inside frame rail.

MOUNTING

HOLE

ACCESS

HOLE

FISHWIRE TECHNIQUE

Parts List

Item Qty Description

1 4 Carriage bolt, 1/2-13" UNC,

1-1/4", grade 8

2 4 Serrated flange nut,

1/2"-13 UNC, grade 8

3 4 Square hole spacer,

1/4" x 1" x 3"

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •13496-INS-RA •12/13/2021 •ECN9115 •PAGE 3

Step 1

From behind the driver-side wheel well,

remove the screw using a T-25 torx bit.

Remove the retaining screw using a T-10 torx

bit from the retaining clip from the lower

fascia. Finish removing the retaining clip that

connects the lower fascia to the trunk pan.

Repeat on the other side of the vehicle.

Note: To assist in the removal of the retaining

clip, compress the tabs that are accessible

from behind / above the lower fascia.

Step 2

Use a utility knife to remove the

underbody coating from the holes in

the frame to allow the hardware to pass

through the holes within the frame.

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •13496-INS-RA •12/13/2021 •ECN9115 •PAGE 4

Step 3

Fishwire the carriage bolt (#1) and square hole

spacer (#3) into each frame rail through an

access hole in each frame rail to the forward-

most mounting hole. The access hole may

need to have the coating removed and / or be

enlarged slightly to allow the hardware to pass

through. Reverse fishwire the hardware through

the access hole into the frame rail.

Step 4

Trim the lower fascia using

the trim diagram as a reference.

3-1/4"

3-1/2"

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •13496-INS-RA •12/13/2021 •ECN9115 •PAGE 5

Step 6

Torque all 1/2" hardware to 110 ft-lbs.

Step 7

Reinstall both retaining clips and screws in

lower fascia that were removed in Step 1.

Step 5

Raise the hitch into position. Pull downward

and rearward on the lower fascia to allow

room for the hitch to pass between the fascia

panel and trunk pan. Make sure to guide

the fishwire through the holes in the hitch.

Remove fishwire and secure the hitch

using the supplied 1/2" flange nuts (#2).

Note: Be careful not to

push the hardware into frame.

TOWING BASICS & SAFETY INFORMATION

For information on safely towing your trailer, visit curtmfg.com/understanding-towing.

Final Installed Image

Otros manuales de Accesorios para automóviles de Lippert

Lippert

Lippert TI-276 Manual de usuario

Lippert

Lippert Vela Pop Up Manual de uso y cuidado

Lippert

Lippert ARIES S224050 Manual de usuario

Lippert

Lippert Promaster Manual de usuario

Lippert

Lippert Tire Linc Instrucciones de instalación

Lippert

Lippert Stargazer Spirit XTR Manual de usuario

Lippert

Lippert Vela Manual de usuario

Lippert

Lippert ARIES 2500207 Manual de usuario

Lippert

Lippert Stargazer Nano Long Skylight Manual de usuario

Lippert

Lippert Power Step 2.0 Manual de usuario

Lippert

Lippert RV ENTRY DOOR Manual de usuario

Lippert

Lippert LUVERNE 401720 Manual de usuario

Lippert

Lippert Curt 18150 Manual de usuario

Lippert

Lippert RV Manual de instrucciones

Lippert

Lippert Curt 16613 Manual de usuario

Lippert

Lippert 45940-85 Manual de usuario

Lippert

Lippert SMART BED UNIVERSAL KIT Manual de usuario

Lippert

Lippert Curt 18110 Manual de usuario

Lippert

Lippert Tire Linc 2020106863 Instrucciones de instalación

Lippert

Lippert Stargazer Nano Wide Skylight Manual de usuario

Lippert

Lippert 2000 Series Manual de usuario

Lippert

Lippert Kwikee Step Well Cover Manual de usuario

Lippert

Lippert Thule 5200 Manual de uso y cuidado

Lippert

Lippert 2021000090 Instrucciones de instalación

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario