Lippert 2021000090 Instrucciones de instalación

lippert.com 432-LIPPERT (432-547-7378) Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

Table of Contents

Introduction ............................................ 1

Purchase Verication .................................. 2

Handle Style ........................................... 2

Door Size .............................................. 2

Safety ................................................... 2

Resources Required ................................... 3

Parts List ................................................ 3

Mounting Options ...................................... 3

Lever Handle Push Bar Installation ................... 4

Removing Original Lever Handle ...................... 4

Sleeve to Bar Installation (Standard Method) .......... 4

Sleeve to Bar Installation (Alternate Method) .......... 5

Completed Lever Push Bar to Door Installation ........ 6

Lever Handle Push Bar Operation .................... 6

Fixed Push Bar Installation ............................ 7

Sleeve to Bar Installation (Standard Method) .......... 7

Sleeve to Bar Installation (Alternate Method) .......... 8

Completed Fixed Push Bar to Door Installation ........ 9

Fixed Push Bar Operation ............................. 9

Notes ................................................... 10

Screen Assist

Installation and

Owner’s Manual

(For Aftermarket Applications)

Introduction

The Screen Assist is a lever handle push bar that allows

you to conveniently and effortlessly open your screen door

in a simple motion. Screen Assist can alternatively be

utilized as a fixed push bar.

Additional information about this product can be obtained

from lci1.com/support or by using the LippertNOW app.

Replacement kits can be ordered from https://store.lci1.

com/ or by using the LippertNOW app.

The myLCI app is available for free on the Apple App

Store®for iPhone®and iPad®and also on Google Play™for

Android™users.

App Store®, iPhone®, and iPad®are registered trademarks

of Apple Inc.

Google Play™and Android™are trademarks of Google Inc.

Screen Assist Aftermarket KitScreen Assist Aftermarket Kit

PNPN DescriptionDescription QtyQty

2021000090 Screen Assist; Rough Opening

(RO) 26-30 IN - Aftermarket Kit

lippert.com 432-LIPPERT (432-547-7378) Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

XX"

Fig.1

Fig.2

doorjamb

measure

here

THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT A

PROCEDURE HAS A SAFETY RISK INVOLVED AND

MAY CAUSE PERSONAL INJURY, PRODUCT AND/OR

PROPERTY DAMAGE IF NOT PERFORMED SAFELY

AND WITHIN THE PARAMETERS SET FORTH IN THIS

MANUAL.

THE “WARNING” SYMBOL ABOVE IS A SIGN THAT

AN INSTALLATION PROCEDURE HAS A SAFETY

RISK INVOLVED AND MAY CAUSE DEATH, SERIOUS

PERSONAL INJURY, SEVERE PRODUCT AND/OR

PROPERTY DAMAGE IF NOT PERFORMED SAFELY

AND WITHIN THE PARAMETERS SET FORTH IN THIS

MANUAL.

FAILURE TO FOLLOW INSTRUCTIONS PROVIDED

IN THIS MANUAL MAY RESULT IN DEATH, SERIOUS

PERSONAL INJURY AND/OR SEVERE PRODUCT AND

PROPERTY DAMAGE, INCLUDING VOIDING OF THE

COMPONENT WARRANTY.

ALWAYS WEAR EYE PROTECTION WHEN

PERFORMING SERVICE, MAINTENANCE OR

INSTALLATION PROCEDURES. OTHER SAFETY

EQUIPMENT TO CONSIDER WOULD BE HEARING

PROTECTION, GLOVES AND POSSIBLY A FULL FACE

SHIELD, DEPENDING ON THE NATURE OF THE TASK.

Safety

Read and fully understand all instructions before installing or

operating this product. Adhere to all safety labels.

This manual provides general instructions. Many variables

can change the circumstances of the instructions, i.e., the

degree of difficulty, operation and ability of the individual

performing the instructions. This manual cannot begin to plot

out instructions for every possibility, but provides the general

instructions, as necessary, for effectively interfacing with the

device, product or system.

Door Size

To verify the proper size of the Screen Assist required, just

above the threshold (Fig.2A), at the front of the entry door

opening (NOT the screen door), measure from doorjamb to

doorjamb (Fig.2). Round up approximately 5/8” to determine the

rough opening (RO) door size. The Screen Assist will only fit

doors with rough openings between 26 and 30 inches.

Purchase Verification

Handle Style

The Screen Assist will only function as a lever handle push bar

if installed on screen doors with the handle style in (Fig.1). The

Screen Assist will work as a fixed push bar on screen doors

with any handle style. See Mounting Options section.

lippert.com 432-LIPPERT (432-547-7378) Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

NOTE: Part numbers are shown for identification purposes

only. Not all parts are available for individual sale. All parts

with a link to the Lippert Store can be purchased.

Screen Assist Aftermarket Kit 2021000090Screen Assist Aftermarket Kit 2021000090

PNPN DescriptionDescription QtyQty

A 2020222201 Mount bracket 2

B 2020222199 Push bar lever handle screw

cover

C 2020222200 Push bar lever handle 1

D276611 Screw - #8-18 X 1/2 square head,

black

E 2020222203 Sleeve 2

F 2020222202 Sleeve - lever handle side 1

G 20203296552 Push bar 1

NOTE: Kit parts will be left over, depending on Mounting

Options (Fig.3 and Fig.4).

Parts List

Fig.3

Mounting Options

parts list E parts list F

Lever Handle Push Bar Mounting Option Parts List

PNPN DescriptionDescription QtyQty

A 2020222201 Mount bracket 1

B 2020222199 Push bar lever handle screw cover 1

C 2020222200 Push bar lever handle 1

D276611 Screw - #8-18 X 1/2 square head,

black

E 2020222203 Sleeve 1

F 2020222202 Sleeve - lever handle side 1

G 20203296552 Push bar 1

Lever Handle Push Bar

Fixed Push Bar

Fig.4

parts list E parts list E

Fixed Push Bar Mounting Option Parts List

PNPN DescriptionDescription QtyQty

A 2020222201 Mount bracket 2

D276611 Screw - #8-18 X 1/2 square head,

black

E 2020222203 Sleeve 2

G 20203296552 Push bar 1

NOTE: If choosing this option, proceed to Fixed Push Bar

Installation instructions.

Resources Required

• Cordless or electric drill or

screw gun

• Appropriate drive bits

• Small flat blade screwdriver

• Non-permanent method of

marking

• Measuring tape

lippert.com 432-LIPPERT (432-547-7378) Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

Fig.7

ball pocket

mount bracket

back view shown

to depict ball

Sleeve to Bar Installation (Standard Method)

1. Insert the ball of the non-lever side sleeve into the

pocket of the mount bracket (Fig.7).

2. Slide the sleeves over the ends of the push bar (Fig. 8)

Fig.5

Fig.6

screw cover

original inside lever handle

push bar inside lever handle

Lever Handle Push Bar

Installation

These steps detail how to install the lever-style push bar to

the inside of the door frame.

Removing Original Lever Handle

Prior to the installation of the lever handle push bar, the

original lever handle must be removed and replaced with

the shorter push bar lever handle that fits into the receiver

sleeve.

1. Using a small at blade screwdriver, remove the

screw cover on the original lever handle on the inside of

the door (Fig.5), then remove the screw.

2. Remove the original inside door lever handle (Fig.5).

3. Install the new push bar lever handle on the inside of the

door, noting the location of the insertion line (Fig.6). Hold

the lever handle on the opposite side to keep it from falling

out while installing the new lever handle.

4. Reinsert the screw and tighten, then install the new

screw cover.

screw

cover

3. From inside the screen door, dry t the assembly to the

door’s width. Insert the lever side sleeve up to the insertion

line (Fig.6) on the inside push bar lever handle (Fig.9) and

align the mount bracket (Fig.7) on the door hinge side so

that the bar rests parallel to the frame of the door.

4. Mark the push bar dimensions with a non-permanent

marker (Fig.9).

insertion

line

Fig.9

Fig.8

mark

center of raised portion of

screen door frame

insertion line

NOTE: Choose one of the following methods to install the

sleeves to the push bar. The standard method begins here

and the alternate method begins on page 5. Both methods

for installing the sleeves to the push bar will utilize the

same method for mounting the completed bar to the door.

parts list F

parts list E

lippert.com 432-LIPPERT (432-547-7378) Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

5. Move the assembly to a stable work surface and

measure from the ends of the push bar to each mark made

previously in step 4. (Fig. 10A, Fig. 10B)

6. Add these measurements together, then divide that

sum by 2. Then, using a non-permanent marker make

new marks on each end of the push bar equal to this new

number. Example: If measurement (Fig. 10A) = 1 ½” and

measurement (Fig. 10B) = 3”, adding them equals 4 ½”.

Then, 4 ½” divided by 2 equals 2 ¼”. Re-apply marks on

each end of the bar at 2 ¼”.

NOTE: This centers the push bar between the sleeves,

ensuring that there is an equal amount of bar for strength

inside each sleeve.

Fig.11

measure measure

marks

Fig.10

7. Slide the sleeves onto each end of the push bar to the

new marks and, using the supplied screws, fasten the

sleeves to the push bar. (Fig.11). The push bar is now

complete.

NOTE: Ensure that care is taken when measuring and

fastening the push bar to the sleeves. The screw creates

a hole in the bar, and once installed, small adjustments

cannot be made.

Sleeve to Bar Installation (Alternate Method)

NOTE: Additional assistance may be needed for this

method.

1. Measure to nd center point on the push bar. Mark the

center point with a non-permanent marker (Fig 12).

2. Slide sleeves over the ends of the push bar (Fig.12).

Fig.12

center mark

B B

X” X”

Fig.13

center

3. From inside the screen door, dry t the assembly to the

door’s width. Insert the lever side sleeve up to the insertion

line on the inside push bar lever handle (Fig. 13A) and align

the mount bracket on the door hinge side so that the bar

rests parallel to the frame of the door (Fig. 13). The sleeve

mount bracket should be centered vertically on the raised

portion of the screen door frame (Fig. 13).

4. Adjust the push bar in the sleeves and measure to

make sure an equal amount of bar (X”) is showing from

the center mark made in step 1 to the start of the each

sleeve (Fig. 13). This ensures there is an equal amount of

bar inside each sleeve for strength. Mark on the bar where

the sleeves start with a non-permanent marker (Fig.13B).

You may need additional assistance to hold the assembly

in place while the measurements are taken and marks are

made.

Parallel A

center

A B

lippert.com 432-LIPPERT (432-547-7378) Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

insertion line

Fig.14

Completed Lever Push Bar to Door Installation

1. Insert the lever side sleeve up to the insertion line on the

inside push bar lever handle (Fig.15). The sleeve should rest

at the insertion line on the lever handle.

NOTE: If a sliding panel is present on the door, ensure that

it is out of the way during the Screen Assist installation to

avoid any accidental damage to the sliding panel. If the

sliding panel is all the way to the hinge side of the door,

damage from installing the bracket will occur.

5. Move the assembly to a stable work surface and install

the sleeves to the marked dimensions using the provided

screws (Fig.14). The push bar is now complete.

NOTE: Ensure that care is taken when measuring and

fastening the push bar to the sleeves. The screw creates

a hole in the bar, and once installed, small adjustments

cannot be made.

Fig.15

screw

Fig.16

Fig.17

crossbar

mount

bracket

center of raised portion of

screen door frame

parallel

2. Mount the bracket on the screen door to the center of

the raised portion of the screen door frame (Fig.16).

NOTE: As a guide during installation, the bottom of the

mount bracket will rest near the top of the mid-door

crossbar and the push bar should be parallel to the

crossbar (Fig.13). Adjust as needed.

3. Using two of the supplied screws secure the mount

bracket to the screen door. (Fig.17). The assembly is now

complete

Lever Handle Push Bar

Operation

To operate the Screen Assist, push down on the lever

handle push bar to unlatch the door.

lippert.com 432-LIPPERT (432-547-7378) Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

Fixed Push Bar Installation

These steps detail how to install the fixed-style push bar to

the inside of the door frame.

NOTE: Be sure to install two Parts List E sleeves (Fig.19).

See the Mounting Options section on page 3 (Fig. 4).

NOTE: Choose one of the following methods to install the

sleeves to the push bar. The standard method begins here

and the alternate method begins on page 8. Both methods

for installing the sleeves to the push bar will utilize the

same method for mounting the completed bar to the door.

Sleeve to Bar Installation (Standard Method)

1. On both sleeves, insert the ball of the sleeve into the

pocket of the mount bracket (Fig.18).

2. Slide the sleeves over the ends of the push bar (Fig. 19)

ball

pocket

mount bracket

back view shown

to depict ball

Fig.18

Fig.19

mark

Fig.20

center of raised portion of

screen door frame

5. Move the assembly to a stable work surface and

measure from the ends of the push bar to each mark made

previously in step 4 (Fig. 21A, Fig. 21B).

6. Add these measurements together, then divide that

sum by 2. Then, using a non-permanent marker, make

new marks on each end of the push bar equal to this new

number. Example: If measurement (Fig. 21A) = 1 ½” and

measurement (Fig. 21B) = 3”, Adding them equals 4 ½”.

Then, 4 ½” divided by 2 equals 2 ¼”. Re-apply marks on

each end of the bar at 2 ¼”.

NOTE: This centers the push bar between the sleeves,

ensuring that there is an equal amount of bar for strength

inside each sleeve.

3. From inside the screen door, dry t the assembly to

the door’s width. Align the mount brackets (Fig.20) on both

sides of the screen door so that the bar rests parallel to the

frame of the door. Each sleeve mount bracket should be

centered vertically on the raised portion of the door frame.

(Fig. 20).

4. Mark the push bar dimensions using a non-permanent

marker (Fig.20).

measure measure

marks

Fig.21

parts list E

A B

lippert.com 432-LIPPERT (432-547-7378) Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

Fig.22

Sleeve to Bar Installation (Alternate Method)

NOTE: Additional assistance may be needed for this

method

1. Measure to nd center point on the push bar. Mark the

center point with a non-permanent marker (Fig. 23).

2. Slide sleeves over the ends of the push bar (Fig.23).

7. Slide the sleeves onto each end of the push bar to the

new marks and, using the supplied screws, fasten the

sleeves to the push bar. (Fig.22).

NOTE: Ensure that care is taken when measuring and

fastening the push bar to the sleeves. The screw creates

a hole in the bar and, once installed, small adjustments

cannot be made.

4. Adjust the push bar in the sleeves and measure to make

sure an equal amount of bar (X”) is showing from the

center mark made in step 1 to the start of the each sleeve

(Fig. 25). This ensures there is an equal amount of bar

inside each sleeve for strength. Mark on the bar where

the sleeves start with a non-permanent marker (Fig.25A).

You may need additional assistance to hold the assembly

in place while the measurements are taken and marks are

made.

3. From inside the screen door, dry t the assembly to the

door’s width. Align the mount brackets on both sides of the

screen door so that the bar rests parallel to the frame of

the door. Each sleeve mount bracket should be centered

vertically on the raised portion of the door frame. (Fig. 20).

Fig.23

center

mark

Fig.24

center of raised portion of

screen door frame

center mark

A A

X” X”

Fig.25

lippert.com 432-LIPPERT (432-547-7378) Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

Fixed Push Bar Operation

1. The xed push bar can be used as needed to assist in

opening or closing the screen door in conjunction with the

existing screen door handle.

X”

cross bar

Fig.26

center of raised

portion of

screen door frame

X”

cross bar

Fig.27

center of raised

portion of

screen door frame

Completed Fixed Push Bar to Door Installation

1. Determine a preferred height for mounting the xed push

bar Screen Assist.

2. Measure from the top of the crossbar to the top

hole in the mount bracket on each side of the push bar

(Fig.27, Fig.28). Ensure the measurements are identical on

both sides so that the bar is installed level to the door.

3. Mark the location of the top holes in the center of the

raised portion of the screen door frame (Fig.27, Fig.28).

NOTE: If a sliding panel is present on the door, ensure that

it is out of the way during the Screen Assist installation to

avoid any accidental damage to the sliding panel. If the

sliding panel is all the way to the hinge side or non-hinge

side of the door, damage from installing the bracket will

occur.

4. Using a cordless or electric drill or screw gun, install the

top screws into the mount bracket (Fig.27A, Fig.28A).

5. Install the bottom screws (Fig.27B, Fig.28B). The

Assembly is now complete.

5. Move the assembly to a stable work surface and install

the sleeves to the marked dimensions using the provided

screws (Fig.26).

NOTE: Ensure that care is taken when measuring and

fastening the push bar to the sleeves. The screw creates

a hole in the bar, and once installed, small adjustments

cannot be made.

Fig.28

lippert.com 432-LIPPERT (432-547-7378) Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

Notes

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Lippert

Lippert

Lippert Vela Pop Up Manual de uso y cuidado

Lippert

Lippert Stargazer Spirit XTR Skylight Manual de usuario

Lippert

Lippert TI-276 Manual de usuario

Lippert

Lippert Curt 13496 Manual de usuario

Lippert

Lippert 10570 Manual de instrucciones

Lippert

Lippert Tire Linc 2020106863 Instrucciones de instalación

Lippert

Lippert Curt 18150 Manual de usuario

Lippert

Lippert Thule 5200 Manual de uso y cuidado

Lippert

Lippert Stargazer Nano Long Skylight Manual de usuario

Lippert

Lippert Curt 60654 Manual de usuario

Lippert

Lippert CURT 45937 Manual de usuario

Lippert

Lippert ARIES S224050 Manual de usuario

Lippert

Lippert OneControl Manual de usuario

Lippert

Lippert 2000 Series Manual de usuario

Lippert

Lippert Tire Linc Instrucciones de instalación

Lippert

Lippert SolidStep Gen 2 Instrucciones de instalación

Lippert

Lippert Vela Pop Up Manual de usuario

Lippert

Lippert Power Step 2.0 Manual de usuario

Lippert

Lippert Project 2000 Sliding Step Manual de usuario

Lippert

Lippert Ground Control 3.0 Manual de usuario

Lippert

Lippert Kwikee Step Well Cover Manual de usuario

Lippert

Lippert Stargazer Spirit XTR Manual de usuario

Lippert

Lippert LatchXtend RV Door Handle Manual de usuario

Lippert

Lippert Power Steps 2.0 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario