LG 47VL10 Manual de usuario

Order Number

: GETEC-C1-11-053

FCC Part 15 subpart B

Test Report Number

: GETEC-E3-11-014

Page 1 / 1

EUT Type: LCD Monitor

FCC ID.: BEJ47VL10

APPENDIX G

: USER’S MANUAL

www.lg.com

OWNER’S MANUAL

MONITOR SIGNAGE

47VL10

Please read this manual carefully before operating the

your set and retain it for future reference.

MONITOR SIGNAGE MODELS

ENG

ENGLISH

ENG

ENGLISH

TABLE OF CONTENTS

CONTENTS

3ASSEMBLING AND PREPAR-

ING

3 Unpacking

4 Separate purchase

5 Parts and buttons

6 Connecting the stand

6 Connecting the Speakers

8 Connecting stand hole cover

8 To install Portrait

9 Installing on a wall

10 REMOTE CONTROL

11 USING THE MONITOR SET

11 Connecting to a PC

11 - HDMI connection

12 - DVI/HDMI connection

12 - RGB connection

13 CUSTOMIZING SETTINGS

13 Accessing main menus

14 - PICTURE settings

17 - AUDIO settings

18 - TIME settings

19 - OPTION settings

21 - INFORMATION settings

22 MAKING CONNECTIONS

23 Connecting to a HD receiver, DVD or

VCR player

23 - HDMI connection

23 - DVI - HDMI connection

24 - AV connection

24 Connecting to the LAN

24 - LAN connection

25 TROUBLESHOOTING

25 General

28 SPECIFICATIONS

ENG

ENGLISH

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual product

and accessories.

y Do not use any pirated items to ensure the safety and product life span.

y Any damages or injuries by using pirated items are not covered by the warranty.

y The accessories supplied with your product may vary depending on the model.

y Product specifications or contents in this manual may be changed without prior notice due to upgrade

of product functions.

Remote control and Batteries Power Cord

CD (Owner's Manual) /

Card

D-Sub Signal Cable

CAUTION

NOTE

ScrewsStand hole cover

ENG

ENGLISH

ASSEMBLING AND PREPARING

Separate purchase

Without prior notice, optional accessories are subject to change to improve the performance of the product,

and new accessories may be added. The illustrations in this manual may differ from the actual product and

accessories.

y Cable holder/Cable tie may not be available in some areas or for some models.

Stand kit Speaker kit

Stand Screws

cable management Cable holder/

Cable Tie

Screws/Cable

Speaker

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

y You can set the Power indicator to on or off by selecting OPTION in the main menus.

Parts and buttons

Screen Marks Description

INPUT Changes the input source.

MENU Accesses the main menus, or saves your input and exits the menus.

 Adjust the up and down.

 Adjusts the volume level.

AUTO/SET Auto in progress for optimal display change change resolution.

/ITurns the power on or off.

IR Receiver This is where the unit receives signals from the remote control.

Power Indicator This Indicator lights up blue when the display operates normally(on mode). If the display

is in sleep (Energy Saving) mode, this indicator color changes to amber.

All of the buttons are touch sensitive and can be operated through simple touch with your finger.

Connection panel ( See p.23 to p.24 )

Screen Buttons

NOTE

Screen Marks

ENG

ENGLISH

ASSEMBLING AND PREPARING

y You can set the Power indicator to on or off

by selecting OPTION in the main menus.

Connecting the stand

- Only on some models.

1Take the parts for the stand out of the box and

assemble them as shown in the picture.

Connecting the Speakers

- Only on some models.

1Mount the product onto the speaker by using

a screw as shown in the following connect the

speaker cable.

2Place a soft cloth on the table and put the

product with the screen facing downward.

Connect the stand as shown in the following

picture.

2After installing your speakers, use holders and

cable ties to organize the speaker cables. (This

feature is not available in all model.)

3Use the screws to secure the stand on the rear

side of the product as shown in the diagram.

Stand Screws

cable management

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

y Do not use the cable management as a

handle for the Monitor.

y The illustrations in this manual may differ

from actual cable interfaces.

Cable Management

- Only on some models.

1Arrange the cables in the center as shown in

the following picture.

2Fit the cable guide to the back to help manage

the cables.

3Hold the Cable management with both hands

and pull it downward.

Using the Kensington security system

The Kensington security system connector is

located at the back of the Monitor set. For more

information of installation and using, refer to the

manual supplied with the Kensington security

system or visit

http://www.kensington.com

Connect the Kensington security system cable

between the Monitor set and a table.

y The Kensington security system is optional.

You can obtain additional accessories from

most electronics stores.

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

To install Portrait

- Only on some models.

When installing Portrait, rotate it clockwise based

on its front.

y When using the wall mounting bracket or

the portrait scene mode, the opening can be

covered by the stand hole cover.

Connecting stand hole cover

1Take the parts for the stand out of the box and

assemble them as shown in the picture.

2Place a soft cloth on the table and put the

product with the screen facing downward.

Connect the stand hole cover as shown in the

following picture.

3Use the screws to secure the stand hole cover

on the rear side of the product as shown in the

diagram.

ScrewsStand hole cover

NOTE

ENG

ENGLISH

ASSEMBLING AND PREPARING

y Disconnect the power cord first, and then

move or install the Monitor set. Otherwise

electric shock may occur.

y If you install the Monitor set on a ceiling or

slanted wall, it may fall and result in severe

injury. Use an authorized LG wall mount

and contact the local dealer or qualified

personnel.

y Do not over tighten the screws as this may

cause damage to the Monitor set and void

your warranty.

y Use the screws and wall mounts that

meet the VESA standard. Any damages

or injuries by misuse or using an improper

accessory are not covered by the warranty.

y Use the screws that are listed on the VESA

standard screw specifications.

y The wall mount kit includes an installation

manual and necessary parts.

y The wall mount bracket is optional. You can

obtain additional accessories from your local

dealer.

y The length of screws may differ depending

on the wall mount. Be sure to use the proper

length.

y For more information, refer to the

instructions supplied with the wall mount.

CAUTION

If you want to mount the monitor on the wall (op-

tional), attach the wall mounting bracket to the rear

of the monitor.

Make sure that the wall mounting bracket is se-

curely fixed to the monitor and to the wall.

Use the wall mount plate and screws that comply

with the VESA standard as specified below.

y 784.8 mm (30.9 inch) or less

* Thickness of the wall mount plate: 2.6 mm

* Fastening screw: Diameter 4.0 mm x Pitch 0.7

mm x

Length 10 mm

y 787.4 mm (31.0 inch) or greater

* Use the wall mount plate and screws con-

forming to the VESA standard.

Installing on a wall

Install the monitor at least 10 cm away from the

wall and leave about 10 cm of space at each side

of the monitor to ensure sufficient ventilation. De-

tailed installation instructions can be obtained from

your local retail store. Please refer to the manual

to install and set up a tilting wall mounting bracket.

10 cm

NOTE

Otros manuales para 47VL10

Tabla de contenidos

Manuales populares de Señalización digital de otras marcas

SMART-AVI

SMART-AVI SIGNAGEPRO Manual de usuario

KeyWest Technology

KeyWest Technology BREEZE Manual de usuario

XtendLan

XtendLan XL-DSP-183C Manual de usuario

Dynascan

Dynascan DS861LR4 Manual de usuario

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Manual de usuario

protech

protech KT-7290 Manual de usuario

WebDT

WebDT 515A Instrucciones de montaje

Samsung

Samsung IWJ Series Manual de usuario

EVERI

EVERI Enrollment Kiosk Manual de usuario

NCR

NCR SelfServ 90 Manual

ViewSonic

ViewSonic EP4602 Manual de usuario

ViewSonic

ViewSonic EP3202r Manual de usuario

Samsung

Samsung OM46N Manual de usuario

Viessmann

Viessmann 6336 Manual de usuario

Osram

Osram Traxon Manual de instrucciones de instalación

Philips

Philips Signage Solutions Series BDL4990VL Manual de usuario

ViewSonic

ViewSonic EP5012-L Manual de usuario

Philips

Philips CRD01/00 Manual de usuario