LG 32LW55A Manual de usuario

www.lg.com

OWNER’S MANUAL

MONITOR SIGNAGE

32LW55A

Please read this manual carefully before operating the your set and

retain it for future reference.

MONITOR SIGNAGE MODELS

ENG

ENGLISH

TABLE OF CONTENTS

3INSTALLATION PREPARATION

3 Accessories

4 Mounting Holes

5 Portrait Layout

6 Storage Method for Panel Protection

6 - Correct Method

6 - Incorrect Method

7PRODUCT INSTALLATION

7 Installing an LVDS Cable

8 Lighting Installation

9 Installation in Enclosure

10 Precaution

10 - Correct Method

10 - Incorrect Method

11 TROUBLESHOOTING

12 SPECIFICATIONS

14 LVDS PIN MAP GUIDE

yThe warranty will not cover any damages caused by using the product in an excessively dusty

environment.

NOTE

ENG

ENGLISH

INSTALLATION PREPARATION

Accessories

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual product

and accessories.

yThe accessories supplied with your product may vary depending on the model.

yProduct specifications or contents in this manual may be changed without prior notice due to upgrade

of product functions.

yLVDS cable is optional and not provided with the product. Please refer to LVDS Pin Map Guide on

pages 14 to 15 for the LVDS cable assembly.

CD (Owner's Manual)/

Easy Setup Guide

yDo not use any unauthorized parts or accessories to ensure the safety and product life span.

yAny damages or injuries by using unauthorized items are not covered by the warranty.

CAUTION

NOTE

ENG

ENGLISH

INSTALLATION PREPARATION

yThis product has the front and back sides. Make sure the product is installed with the front side facing

forward.

yThe image is reversed on the back.

CAUTION

Mounting Holes

Use M3 screws to mount the monitor. The holes for the screws are on the rear of the product.

< Front of the product >

< Rear of the product >

ENG

ENGLISH

INSTALLATION PREPARATION

Portrait Layout

To install in portrait mode, rotate the set clockwise 90 degrees when looking at from the front.

The portrait mode is only available on the scaler board. (The scaler board should support portrait mode.)

yYou can make a scaler board or purchase AD Box (TSP500, TSP300).

yThe production of a scaler board is optional.

CAUTION

ENG

ENGLISH

INSTALLATION PREPARATION

Correct Method Incorrect Method

Storage Method for Panel Protection

When laying the product on a flat floor, pit it face

down on a cushion or blanket to prevent scratch-

ing and damage.

If there is no a cushion or a soft cloth available,

ensure the floor is clean. Then lay the product

down carefully with the panel facing either upward

or downward. At this time, make sure that no

object falls on the panel.

Cushion

Panel

If the product is tilted onto the bezel, the bottom of

the panel may be damaged.

If the product is tilted onto the edge of the panel,

the panel may be damaged.

Panel

ENG

ENGLISH

PRODUCT INSTALLATION

Installing an LVDS Cable

The LVDS cable port is located as shown in the figure below.

When installing the product, make sure there is enough space to install the LVDS cable.

45 mm

30 mm

LVDS Cable

(Not included)

yLVDS cable is optional and not provided with the product.

NOTE

ENG

ENGLISH

PRODUCT INSTALLATION

Lighting Installation

This product must be installed with backlighting.

Lighting must be installed behind the product so that the display can be seen clearly.

If something obstructs the backlighting, additional lighting may be required.

Lighting

Additional lighting

Object

600 lux or more

(When the Full Screen

is White.)

600 lux or more

(When the Full Screen

is White.)

ENG

ENGLISH

PRODUCT INSTALLATION

< Example of the product in the enclosure >

< Example of the lighting installation >

Lighting must be installed in the enclosure.

Installation in Enclosure

Install the product in the enclosure. Wear work gloves when installing the product. Do not use bare hands.

Otherwise, it may cause personal injury.

1Place the product in the enclosure.

2Attach the product using the prepared screw holes and an additional enclosure guide frame.

yThis product can be installed in locations

other than within the enclosure.

NOTE

yThe panel of this product is so thin that it can

be easily broken when it is exposed to the

outside. Use a clear protective cover to keep

the product from exposure to the elements.

yWhen installing the product in its housing,

make sure that the framework of the product

is grounded. (This helps prevent the product

being damaged in the event of thunder and

lightning.)

CAUTION

ENG

ENGLISH

PRODUCT INSTALLATION

Precaution

Do not lift up the product by holding a corner.Do not hold the screen area when holding the prod-

uct.

Use a soft cloth moistened with n-hexane to

remove dust or stains on the screen.

Correct Method Incorrect Method

yMake sure the power is disconnected before

moving or installing the product. Otherwise

electric shock may occur.

yWear working gloves when installing the

product. Do not use bare hands. Otherwise,

it may cause personal injury.

yIf you install the product on a ceiling or

slanted wall, it may fall and result in severe

injury.

yDo not fasten the screws too tightly; this may

cause damage to the product and void your

warranty.

yUse M3 x 4 mm screws to mount the

monitor. Any damages or injuries caused by

misuse or use of improper accessories are

not covered by the warranty.

yIf a fixed image displays on the screen for a

long period of time, it will be imprinted and

become a permanent disfigurement on the

screen. This is image burn or burn-in and not

covered by the warranty.

yTo prevent image sticking, do not play a still

image for more than two hours.

yRecommended operation time for optimum

performance and reliability is 12 hours or

less per day.

CAUTION

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Señalización digital de otras marcas

SMART-AVI

SMART-AVI SIGNAGEPRO Manual de usuario

KeyWest Technology

KeyWest Technology BREEZE Manual de usuario

XtendLan

XtendLan XL-DSP-183C Manual de usuario

Dynascan

Dynascan DS861LR4 Manual de usuario

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Manual de usuario

protech

protech KT-7290 Manual de usuario

WebDT

WebDT 515A Instrucciones de montaje

Samsung

Samsung IWJ Series Manual de usuario

EVERI

EVERI Enrollment Kiosk Manual de usuario

NCR

NCR SelfServ 90 Manual

ViewSonic

ViewSonic EP4602 Manual de usuario

ViewSonic

ViewSonic EP3202r Manual de usuario

Samsung

Samsung OM46N Manual de usuario

Viessmann

Viessmann 6336 Manual de usuario

Osram

Osram Traxon Manual de instrucciones de instalación

Philips

Philips Signage Solutions Series BDL4990VL Manual de usuario

ViewSonic

ViewSonic EP5012-L Manual de usuario

Philips

Philips CRD01/00 Manual de usuario