LG 98UM5K-B Manual de usuario

OWNER’S MANUAL

LG Digital Signage

(MONITOR SIGNAGE)

Please read this manual carefully before operating your set and retain it for future

reference.

www.lg.com

98UM5K-B

110UM5K-B

ENGLISH

TABLE OF CONTENTS

BASIC .............................................3

- Checking the Accessories ............................................3

- Learning the Buttons......................................................4

GETTING READY ...........................5

- External Equipment Setup...........................................5

- Kensington Lock Device ................................................6

CHECKING BEFORE

INSTALLATION ..............................7

- Installation Orientation .................................................7

- Installation Location........................................................8

- Wall Mount Holder ..........................................................9

PRECAUTIONS FOR USE............ 10

- Dust.......................................................................................10

- Afterimage ........................................................................10

PRODUCT SPECIFICATIONS...... 12

LICENCE...................................... 15

ENGLISH

WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may

cause radio interference.

BASIC

NOTE

•The accessories provided with your product may vary depending on the model or region.

•Product specifications or contents in this manual may be changed without prior notice due to upgrade of product

functions.

•SuperSign Software & Manual

- Visit https://partner.lge.com to download the latest SuperSign software and manual.

Checking the Accessories

x 3

Depending on country

ENGLISH

Learning the Buttons

The illustrations may differ depending on the model.

98UM5K-B

110UM5K-B

•: Adjusts up and down.

•: Moves left and right.

•: Displays the current signal and mode.

•: Accesses the main menus, or saves your input and exits the menus.

•: Change the input signal.

•: Turns the power on and off.

ENGLISH

GETTING READY

External Equipment Setup

IR Receiver

This allows a remote control sensor to be placed in a custom location.

ENGLISH

Kensington Lock Device

(This feature applies only to some models.)

The Kensington lock device connector is located on the back of the monitor. For more information on installation and

use, refer to the user manual provided with the locking device.

Connect the Kensington security system cable between the monitor and a table.

NOTE

•The Kensington lock device is an optional specification.

•This is a general illustration of installation and may look different from the product held by the customer.

ENGLISH

CHECKING BEFORE INSTALLATION

We are not responsible for product damage caused by failure to follow the guide.

Installation Orientation

Using Vertically

(98UM5K-B Only)

When installing vertically, rotate the monitor 90 degrees clockwise while facing the front of the screen.

Tilt Angle

40 mm

15˚

Ceiling, Floor Orientation

ENGLISH

Installation Location

We are not responsible for product damage caused by failure to follow the guide.

Indoor

Installing on a Wall

A: 40mm (1.5inches) or more

•The warranty will not cover any damage

caused by using the product in direct sunlight

on the front panel.

Installing on a Recessed Wall

A : 40mm (1.5inches) or more

B : 50mm (1.9inches) or more

C: 100mm (3.9inches) or more

•The warranty will not cover any damage

caused by using the product in direct sunlight

on the front panel.

Outdoor

Outdoor Enclosed

ENGLISH

Wall Mount Holder

To install the monitor on a wall, attach a wall mount holder (optional) to the back of the monitor.

Take caution, and ensure that the wall mount holder (optional) is securely fixed to the monitor and to the wall.

The Wall Bracket dimensions of the wall mount by model are as follows.

B1 B2

98UM5K-B 110UM5K-B

Model Wall Bracket Dimensions (A x B1) (mm) Standard

Dimensions

Length (Maximum)

(mm) Quantity

98UM5K-B

800x400

M8 20 6

Wall Bracket Dimensions (A x B2) (mm)

800x800

Model Wall Bracket Dimensions (C x D) (mm) Standard

Dimensions

Length (Maximum)

(mm) Quantity

110UM5K-B 1500x600 M8 30 4

Model Wall Bracket Dimensions (A x B1) (inches) Standard

Dimensions

Length (Maximum)

(inches) Quantity

98UM5K-B

31.4x15.7

M8 0.7 6Wall Bracket Dimensions (A x B2) (inches)

31.4x31.4

Model Wall Bracket Dimensions (C x D) (inches) Standard

Dimensions

Length (Maximum)

(inches) Quantity

110UM5K-B 59.0x23.6 M8 1.1 4

CAUTION

•Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.

•If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.

•Damage to the monitor by tightening the screws too tightly may void your warranty.

•Use screws and wall mount plates conforming to Wall Mount standards. Breakage or personal injury due to use or

misuse of inappropriate components is not covered by the warranty of this product.

NOTE

•Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.

•For more information on installation, please refer to the user manual for the wall mount.

ENGLISH

PRECAUTIONS FOR USE

Dust

The warranty will not cover any damage caused by using the product in an excessively dusty environment.

Afterimage

•After-image appears when the product is turned off.

- Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screen-

saver function.

- Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause

an afterimage. This is normal due to the display characteristics of this product.

•When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between

the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time

and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called

an afterimage.

•Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed

for a long time. The following are operational recommendations for reducing the occurrence of afterimages when

using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better

for preventing afterimages.

•Recommended Usage Condition

Otros manuales para 98UM5K-B

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Señalización digital de otras marcas

SMART-AVI

SMART-AVI SIGNAGEPRO Manual de usuario

KeyWest Technology

KeyWest Technology BREEZE Manual de usuario

XtendLan

XtendLan XL-DSP-183C Manual de usuario

Dynascan

Dynascan DS861LR4 Manual de usuario

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Manual de usuario

protech

protech KT-7290 Manual de usuario

WebDT

WebDT 515A Instrucciones de montaje

Samsung

Samsung IWJ Series Manual de usuario

EVERI

EVERI Enrollment Kiosk Manual de usuario

NCR

NCR SelfServ 90 Manual

ViewSonic

ViewSonic EP4602 Manual de usuario

ViewSonic

ViewSonic EP3202r Manual de usuario

Samsung

Samsung OM46N Manual de usuario

Viessmann

Viessmann 6336 Manual de usuario

Osram

Osram Traxon Manual de instrucciones de instalación

Philips

Philips Signage Solutions Series BDL4990VL Manual de usuario

ViewSonic

ViewSonic EP5012-L Manual de usuario

Philips

Philips CRD01/00 Manual de usuario