LevelOne KCM-0832 Manual de usuario

LevelOne

KCM-0832 / KCM-1632

8 / 16-Port KVM Module

Quick Installation Guide

PackageChecklist

KCM-0832 or KCM 1632

Quick Installation Guide

Introduction

Each Host port connectoris HDDB15 type. The 3-in-1 VGA cable has a HDDB15 male connectorat one end, plug it into PC

port of KVM switch back panel, and plug theother end’s connectors to PC VGA port, and if

■PS/2 Computers --- Connect PS/2 keyboard connectorto keyboard port, and PS/2 mouse connectorto mouse port.

■USB Computers --- connect PS/2-USB changerto PS/2 keyboard connector, then plug the changerinto available USB

port. This single USB port can communicate both keyboard and mouse signals. It works as a standard HID (Human

Interface Device), no extra driver needed.

■Note: the PS/2 mouse connectorshould be left disconnected.

HardwareInstallation

Before installation, please make sure all of peripherals and computers have been turned off.

Install ModularKVMSwitch

1. Push KVM switch into the rails from rear of cabinet.

2. Slide the unit into therack and secure it to the rack.

Install the Computer/Server on Host Side

Local Console --- Connect the keyboard, mouse and monitor to the local consoleports.

The recommended Power Up sequence is as follows: monitor, KVM Switch, finally the computers.

Hotkeys& OSD

The table blow lists all supported hotkey commands.

Command

Function

Space bar

Bring up the OSD overlay screen

↑or↓

Moving Up or Down

[1,2,..,8] bank,

[01, 02,..,32] port

■The first digit is bank number starting with “1”. The first KVM

switch unit on the Daisy chain line is of bank 1 (the Master). A

standalone KVM switch is fixed in bank 1.

■The second & third digits are port number starting with “01”

PgUp

Previous bank

PgDn

Next bank

To enable/disable beep sound function

To enable/disable theScreen Saving function and 10min

auto-logout function. This function is default OFF (Disable).

To enable Firmware upgrade function

To log out the OSD. If Security is enabled it will showup the Login

window waiting for username and password.If Security is disabled

it will showup the Status window

For SUPERVISOR to set the OSD back to factory default value

(except User Security settings).

For SUPERVISOR to activate the Auto-Scan function

For SUPERVISOR to enable/disable Security function. If the

Security is off, we don’t need user name & password to access to the

KVM system. This function is default OFF (Disable).

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”. Immediately,

the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch, and does not affect your

computers or software function in any way.

Example #2 –To switch to Bank 1 Port1, press “Caps Lock”, “Caps Lock”, and “1”, “0”, “1”.

Caps

Lock

Caps

Lock

Caps

Lock

Caps

Lock

Space Bar

please enter next key in

2 seconds in the

Hotkey sequence

please enter next key in

2 seconds in the

Hotkey sequence

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de LevelOne

LevelOne

LevelOne GEU-2429 Manual de usuario

LevelOne

LevelOne GNS-8000A Manual de usuario

LevelOne

LevelOne GSW-2472TGX Manual de usuario

LevelOne

LevelOne GTL-2881 Manual de usuario

LevelOne

LevelOne GEL-2060 Guía rápida

LevelOne

LevelOne GSW-2473 Manual de usuario

LevelOne

LevelOne ProCon GSW-1291 Manual de usuario

LevelOne

LevelOne FSW-1610TX Manual de usuario

LevelOne

LevelOne GTP-5271 Manual de usuario

LevelOne

LevelOne FGP-1000 Manual de usuario

LevelOne

LevelOne Infinity IES-0880 Manual de usuario

LevelOne

LevelOne POH-1260 Manual de usuario

LevelOne

LevelOne FSW-1640TX Manual de usuario

LevelOne

LevelOne FSW-1609TFX Manual de usuario

LevelOne

LevelOne IES-0853 Manual de usuario

LevelOne

LevelOne Infinity IES-0510 Manual de usuario

LevelOne

LevelOne KVM-0221 Manual de usuario

LevelOne

LevelOne IES-0600 Manual de usuario

LevelOne

LevelOne GSW-0504 Manual de usuario

LevelOne

LevelOne GTP-2871 Manual de usuario

LevelOne

LevelOne GEL-2060 Guía rápida

LevelOne

LevelOne GES-2451 Manual de usuario

LevelOne

LevelOne ProCon GSW-2496 Manual de usuario

LevelOne

LevelOne GEP-2652 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario