Leister Comet 700 Manual de usuario

Leister Technologies AG

Galileo-Strasse 10

6056 Kaegiswil/Switzerland

Tel. +41 41 662 74 74

Fax +41 41 662 74 16

www.leister.com

sales@leister.com

COMET 700

COMET 500

English

Table of contents

1. Application COMET 700/500 4

1.1. Important safety instructions 4

1.2. Intended use 5

1.3. Non-intended use 5

2. Technical data COMET 700/500 6

3. Transport COMET 700/500 7

4. Your COMET 700/500 8

4.1. Type plate and identiﬁcation 8

4.2. Scope of delivery 8

4.3. Optional accessories 8

4.4. Overview of device parts 9

4.5. Park position 10

4.6. Power supply interruption 10

5. Settings on COMET 700/500 11

5.1. Checking the position of the hot wedge 11

5.2. Contacting system setup 12

6. Quick Guide COMET 700/500 13

6.1. Switch on COMET 700/500 (upper line) 13

6.2. Switch o COMET 700/500 (lower line) 13

7. Control panel of the COMET 700 14

7.1. Control panel overview 14

7.2. Function keys 14

7.3. Display of the status LED 15

7.4. Display symbols of the status display 16

7.5. Display symbols of the function display 16

7.6. Display symbols of the working display 17

8. COMET 700 control panel setup menu 18

8.1. Menu navigation overview 18

8.2. Setting up, saving, and selecting recipes (Save recipes) 19

8.3. Entry of recipe names 21

8.4. Standby Mode 22

8.5. Advanced Mode 22

8.6. Duty Info 23

8.7. General Info 23

8.8. Warnings 23

8.9. Machine Setup 23

8.10. Application Mode 24

8.11. Set Values 24

8.12. Welding data recording and WLAN settings WLAN settings 25

8.13. Reset (Reset to defaults) 25

8.14. Day distance display 25

8.15. Key lock 26

Table of contents

9. Commissioning COMET 700 27

9.1. Work environment and safety 27

9.2. Preparation for welding 27

9.3. Welding process 29

10. Warnings and error messages COMET 700 31

11. COMET 500 control panel 32

11.1. Control panel overview 32

11.2. Status LED display 32

11.3. Display symbols 33

11.4. Setting the unit system 33

11.5. Key lock 33

12. Commissioning COMET 500 34

12.1. Work environment and safety 34

12.2. Preparation for welding 35

12.3. Welding process 37

13. COMET 500 errors 38

14. Frequently asked questions, causes, and measures COMET 700/500 38

15. Assembly of accessories COMET 700/500 39

15.1. Replacement of the drive/pressure rollers 39

15.2. Assembling the ﬁeld kit 40

15.3. Assembling the guide bar 41

15.4. Assembling the drive roller extension 41

16. Maintenance COMET 700/500 42

17. Disposal COMET 700/500 43

18. Declaration of conformity COMET 700/500 43

The local supply voltage must match the nominal voltage speciﬁed on the device. If the line voltage

fails, switch o the main switch and place the welding machine in the park position. EN 61000-3-11;

Zmax = 0.324Ω + j 0.202Ω. Consult electricity supply company if necessary.

If the device is being used on construction sites, a fault current circuit breaker must be used to

protect site personnel from electrical shock due to dampness and moisture.

There is a danger to life

from electric shock due to electrical voltage. The welding machine must therefore only be connect-

ed to sockets and extension cables with a protective earth conductor. Protect the welding machine

from moisture and wet conditions. Prior to commissioning, check the power cord, the plug, and the

extension cable for electrical and mechanical damage. The welding machine may only be opened by

instructed, qualiﬁed personnel.

Risk of ﬁre and explosion

The welding machine can become an ignition source for ﬁre and explosion. It must therefore not be

used near explosive gases or ﬂammable materials. To avoid burning of the material to be welded,

please read the material safety data sheet from the material manufacturer. The welding machine must

only be used in the open or in a well-ventilated area.

Risk of burns

Do not touch hot wedge and surrounding parts when hot. Only touch the device at the handles and

operating units. Always allow the device to cool down.

Caution

Warning

1.1. Important safety instructions

Read through the operating instructions before commissioning for the ﬁrst time.

In addition to the safety instructions contained in the individual sections of this instruction manual, the following

regulations must always be observed.

1. Application COMET 700/500

We recommend that you always keep the instruction manual with the device.

You can ﬁnd more information on the COMET 700/500 and the myLeister app at www.leister.com

Congratulations on purchasing your COMET 700 or 500.

You have chosen a ﬁrst-class hot-wedge welding machine.

It was developed and produced in accordance with the latest technology in the plastics-processing industry.

It has also been manufactured using high-quality materials.

COMET 700/500

Hot wedge welding machine

Operating Manual (Translation of the Original User Manual)

Material Material thickness reference value Hot Wedge

PE-HD, PP 0.5 mm – 2.5 mm/ 20 mil – 100 mil Copper

PE-LD, TPO, FPO 0.5 mm – 3.0 mm/ 20 mil – 120 mil Copper

CSPE 0.5 mm – 2.5 mm/ 20 mil – 100 mil Steel

PVC-P 0.5 mm – 3.0 mm/ 20 mil – 120 mil Steel

Do not touch moving parts

There is a risk of inadvertently becoming caught and being pulled in. Do not wear loose articles of

clothing such as scarves or shawls. Tie up long hair or protect it by wearing headgear.

The device may only be operated under supervision as waste heat can reach ﬂammable materials.

The device should also only be operated by trained specialists or under their supervision. Children are

not permitted to operate the device.

When welding, be aware of device hazards in the surrounding area, e.g., risk of tripping, risk of slip-

ping, strong sunlight, unattended equipment, etc.

1.3. Non-intended use

Additional materials upon request.

Material-speciﬁc properties can inﬂuence the welding capability.

Material types and thicknesses

1.2. Intended use

Any other use or any use beyond the type of use described is deemed non-intended use. In particular, the welding

of unintended materials.

The COMET 700/500 is intended for overlap welding of thermoplastic ﬁlms and sealing sheets.

Only use original Leister spare parts and accessories; otherwise, any warranty and/or guarantee claims will be

invalidated.

Welding geometry

• The maximum overlap width of the lower and upper membranes is 125 mm.

• Welding seam widths 45 mm or 50 mm (depending on design).

• Welding seam with/without test channel (depending on version).

COMET 700

230 V

COMET 700

120 B

COMET 500

230 V

Voltage * V~ 230 120 230

Power W 2300 1700 2300

Frequency Hz 50/60

Temperature °C

°F

80 – 460

176 – 860

Drive m/min

ft/min

0.8 – 8.0

2.6 – 26.2

Max. joining force N

lbf

1000

225

Noise level LA LpA (dB)

LWA (dB)

60.4 (K = 3 dB)

68.4 (K = 3 dB)

Sound power level

Vibration level ah(m/s2)< 2.5 (K = 1.5 m/s2)

Weight

(without power cord)

lbs

9.4

20.7

9.4

20.7

9.2

20.3

cDimensions

a) mm

inches

375 (ﬁeld kit) or 325 (indoor kit)

14.7 (ﬁeld kit) or 12.7 (indoor kit)

b) mm

inches

285 (ﬁeld kit) or 245 (indoor kit)

11.1 (ﬁeld kit) or 9.6 (indoor kit)

c) mm

inches

285 (ﬁeld kit) or 260 (indoor kit)

11.1 (ﬁeld kit) or 10.2 (indoor kit)

2. Technical data COMET 700/500

* Connection voltage cannot be changed

We reserve the right to make technical changes.

To lift the hot wedge welding machine manually, use

the handles (2) and the clamping lever (4).

Use the storage box supplied and the handle attached to the storage box to transport the hot wedge welding

machine.

The hot wedge (15) must have cooled down to at least 60°C/140°F before transport.

Never store ﬂammable materials (e.g. plastic, wood) in the storage box!

Never use the handles (2) and the clamping lever (4) on the device or the handles on the storage

box for transport with the crane.

Comply with applicable national regulations regarding the carrying or lifting of loads.

The total weight of your COMET 700/500 including transport box is up to 14.5 kg (depending on the

version).

3. Transport COMET 700/500

4.3. Optional accessories

4.2. Scope of delivery

4.1. Type plate and identification

4. Your COMET 700/500

You can ﬁnd more information on optional accessories at www.leister.com

Standard equipment in the storage box:

• 1x COMET 700/500 hot wedge welding machine (according to your speciﬁcation)

• 1x Quick Guide (glued into case)

• 1x Safety instructions

• 1x Brass brush

• 1x Test Certiﬁcate (COMET 700 only)

The model and serial number are indicated on your device's name plate (18).

Please transfer this information to your instruction manual. In the event of any inquiries to our representatives or

authorized Leister Service Centers, please always refer to this information.

Model:..............................................................................................................................................................

Serial no.:.........................................................................................................................................................

Example of a name plate for COMET 700 and COMET 500

431

17186b6a

1314

4.4. Overview of device parts

11. drive/pressure roller bottom

12. roller rear

13. contacting system bottom

14. contacting system top

15. hot wedge

16. rollers front (according to your device speciﬁcation)

17. main switch

18. name plate (with model number and serial number)

1. Power cord

2. for handles

3. on control panel

(3a COMET 700, 3b COMET 500)

4. clamping lever

5. for locking clamping lever

6. for joining force module

(6a COMET 700, 6b COMET 500)

7. clamping arm

8. for swing head

9. for drive/pressure roller, top

10. Towing tongue (according to your device speciﬁcation)

Condition of device prior to

power supply interruption

Duration power

outage Condition of device after power supply interruption

COMET 700 COMET 500

The drive and heating are

switched on

≤ 5 sec

If the BASIC recipe is load-

ed: The device continues

to run without a restart

safeguard with the same

settings as before the

outage.

If another recipe is loaded:

The device continues to run

without protection against

restarting with the settings

stored in the recipe.

The device continues to run

without a restart safeguard

with the same settings as

before the outage.

> 5 sec The device restarts. The start display appears on the

display.

Drive and/or heating are

switched o > 0 sec The device restarts. The start display appears on the

display.

The local supply voltage must match the nominal voltage speciﬁed on the device. If the line voltage

fails, switch o the main switch and place the welding machine in the park position. EN 61000-3-11;

Zmax = 0.324Ω + j 0.202Ω. Consult electricity supply company if necessary.

The clamping lever (4) must be open during work interruptions and for cooling. The device must be stored in

accordance with the ﬁgure below and secured against rolling away independently.

4.6. Power supply interruption

4.5. Park position

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de soldadura de Leister

Leister

Leister WELDPLAST 600 Manual de usuario

Leister

Leister Varimat V Manual de usuario

Leister

Leister BITUMAT B2 Manual de usuario

Leister

Leister Uniplan Wedge Manual de usuario

Leister

Leister TRIAC AT Manual de usuario

Leister

Leister VARIANT T1 Manual de usuario

Leister

Leister UNIPLAN S Manual de usuario

Leister

Leister Uniroof E Manual de usuario

Leister

Leister FUSION 2 Manual de usuario

Leister

Leister VARIMAT V2 Series Manual de usuario

Leister

Leister WELDPLAST S6 Manual de usuario

Leister

Leister HEMTEK ST Manual de usuario

Leister

Leister WELDPLAST S4 Manual de usuario

Leister

Leister Astro Manual de usuario

Leister

Leister TWINNY T7 Guía de configuración

Leister

Leister WELDPLAST S1 F Manual de usuario

Leister

Leister Asto Manual de usuario

Leister

Leister BITUMAT B2 Manual de usuario

Leister

Leister Twinny T Manual de usuario

Leister

Leister AIRSTREAM 100 Manual de usuario

Leister

Leister Uniplan E Manual de usuario

Leister

Leister DRIVE Manual de usuario

Leister

Leister FUSION 3C Manual de usuario

Leister

Leister SEAMTEK 36 Manual de usuario

Manuales populares de Sistema de soldadura de otras marcas

Berner

Berner PLASMACUT 54 Manual de usuario

Pro Spot

Pro Spot PR-155 Manual de usuario

Forney

Forney 210 Manual de usuario

Thermal Arc

Thermal Arc 400S Manual de usuario

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manual de usuario

GYS

GYS PROTIG 201 AC/DC Manual de usuario

TAFA

TAFA 30*8B35 Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manual de usuario

ESAB

ESAB Buddy Arc 145 Manual de usuario

CIGWELD

CIGWELD 636804 Guía rápida

Red-D-Arc

Red-D-Arc DC-400 Manual de usuario

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manual de usuario

Elettro

Elettro HI-MIG 3000 SYNERGIC Manual de usuario

WIA

WIA Weldmatic 270 CP132-2 Manual de usuario

Sonics

Sonics H520T Manual de usuario

Miller

Miller Big Blue 400D Manual de usuario

NewArc

NewArc RT2000 Guía de inicio rápido

Hypertherm

Hypertherm powermax1000 Manual de usuario