Leica GPS1200+ Instrucciones de uso

Leica GPS1200+

Applications

Field Manual

Version 7.1

English

2GPS1200+ Introduction

Introduction

Purchase Congratulations on the purchase of a GPS1200+ Series instrument.

)To use the product in a permitted manner, please refer to the detailed safety direc-

tions in the User Manual.

Product

identification

The type and the serial number of your product are indicated on the type plate.

Enter the type and serial number in your manual and always refer to this information

when you need to contact your agency or Leica Geosystems authorized service

workshop.

Symbols The symbols used in this manual have the following meanings:

Trademarks • Windows and Windows CE are a registered trademark of Microsoft Corporation

• CompactFlash and CF are trademarks of SanDisk Corporation

• Bluetooth is a registered trademark of Bluetooth SIG, Inc

All other trademarks are the property of their respective owners.

Validity of this

manual

• This manual applies to all GPS1200+ instruments. Differences between the

various models are marked and described.

• The RX1200 is available as RX1210 or with touch screen functionality as

RX1210T, RX1250X, RX1250Xc, RX1250T or RX1250Tc. The name RX1210 is

used throughout the manual and may also represent the touch screen models.

Only use the supplied stylus on the screens of the touch screen models.

• This manual covers standard real-time surveying applications. Refer to the

GPS1200+ Technical Reference Manual for information about other function-

ality available.

Available

documentation

Type: _____________________

Serial No.: _____________________

Type Description

)Important paragraphs which must be adhered to in practice as

they enable the product to be used in a technically correct and

efficient manner.

Name Description Format

User Manual All instructions required in order to

operate the product to a basic level are

contained in the User Manual. Provides

an overview of the product together with

technical data and safety directions.

Introduction GPS1200+ 3

Refer to the following resources for all GPS1200+ documentation and soft-

ware:

• the SmartWorx DVD

• http://www.leica-geosystems.com/downloads

Name Description Format

System Field Manual Describes the general working of the

product in standard use. Intended as a

quick reference field guide.

-x

Application Programs

Field Manual

Describes specific onboard application

programs in standard use. Intended as a

quick reference field guide. The Road-

Runner application program is described

in a separate manual.

Technical Reference

Manual

Overall comprehensive guide to the

product and program functions. Included

are detailed descriptions of special soft-

ware/hardware settings and soft-

ware/hardware functions intended for

technical specialists.

-x

4GPS1200+ Table of Contents

Table of Contents

In this manual Chapter Page

1 Application Programs - Getting Started 7

1.1 Starting an Application Program 7

1.2 Configuration of a Logfile 10

2 COGO 11

2.1 Overview 11

2.2 Accessing COGO 12

2.3 Configuring COGO 13

2.4 COGO Calculation - Inverse Method 15

2.4.1 Inverse Point - Point 16

2.4.2 Inverse Point - Line 17

2.4.3 Inverse Point - Arc 20

2.4.4 Inverse Point - Current Position 23

2.5 COGO Calculation - Traverse Method 25

2.6 COGO Calculation - Intersections Method 29

2.7 COGO Calculation - Line/Arc Calculations Method 33

2.8 COGO Calculation - Shift, Rotate & Scale (Manual) Method 39

2.9 COGO Calculation - Shift, Rotate & Scale (Match Pts) Method 44

2.10 COGO Calculation - Area Division 46

3 Determine Coordinate System - General 53

3.1 Overview 53

3.2 Configuring Determine Coordinate System 55

3.2.1 Configuring Determine Coordinate System - Normal 55

3.2.2 Configuring Determine Coordinate System -

One Point Localisation 57

4 Determine Coordinate System - Normal 59

4.1 Determining a New/Updating a Coordinate System 59

4.2 Selecting/Editing a Pair of Matching Points 64

4.3 Transformation Results 65

5 Determine Coordinate System - One Point Localisation 67

5.1 Accessing Determine Coordinate System -

One Point Localisation 67

5.2 Determine Coordinate System -

Onestep/Twostep Transformation 68

5.2.1 Determining a New Coordinate System 68

5.2.2 Computing the Grid Scale Factor for

Twostep Transformations 74

5.2.3 Computing the Height Scale Factor for

Twostep Transformations 75

5.3 Determine Coordinate System - Classic 3D Transformation 76

5.4 Computing Required Azimuth 77

6 Reference Line 79

6.1 Overview 79

6.2 Configuring Reference Line 81

6.3 Managing Reference Lines/Arcs 84

6.3.1 Overview 84

Table of Contents GPS1200+ 5

6.3.2 Manually Entering a Reference Line/Arc 85

6.3.3 Selecting a Reference Line/Arc from the Job 88

6.3.4 Defining Reference Line/Arc Offsets 91

6.3.5 Defining Reference Line/Arc Slope 92

6.4 Measuring to a Reference Line/Arc 94

6.5 Staking to a Reference Line/Arc 99

6.6 Gridstaking to a Reference Line/Arc 102

6.7 Staking to a Polyline 104

6.7.1 Overview 104

6.7.2 Accessing Staking to Polylines & Choosing a Polyline 105

6.7.3 Stake Parameters 106

6.7.4 Staking Operation 108

6.7.5 Results of Stakeout 111

7 Reference Plane 113

7.1 Overview 113

7.2 Configuring Reference Plane 115

7.3 Managing Reference Planes 116

7.4 Measuring Points to a Reference Plane 120

8 Stakeout 123

8.1 Overview 123

8.2 Configuring Stakeout 124

8.3 Staking Out 128

8.4 Stakeout Difference Limit Exceeded 131

9 Survey - General 133

9.1 Pre-Survey Preparations 133

9.2 Static Operations 135

9.3 Post-Processed Kinematic Operations 138

9.4 Real-Time Reference Operations 139

9.5 Real-Time Rover Operations 141

10 Survey - Auto Points 143

10.1 Overview 143

10.2 Configuring Auto Points 144

10.3 Auto Points for Post-Processed Kinematic and

Real-Time Rover Operations 148

10.4 Offset Points of Auto Points 151

10.4.1 Overview 151

10.4.2 Configuring Offset Points 152

11 Survey - Hidden Points 153

11.1 Overview 153

11.2 Measuring Hidden Points 154

11.3 Hidden Point Measurement Including Heights 161

12 Survey Cross Section 165

12.1 Overview 165

12.2 Configuring Survey Cross Section 166

12.3 Surveying Cross Sections 168

12.4 Cross Section Templates 170

12.4.1 Accessing Cross Section Template Management 170

12.4.2 Creating/Editing a Cross Section Template 171

6GPS1200+ Table of Contents

13 Volume Calculations 175

13.1 Overview 175

13.2 Configuring Volume Calculations 176

13.3 Survey Points 177

13.4 Triangulate Surfaces 179

13.5 Compute Volumes 182

14 Wake-Up 185

14.1 Overview 185

14.2 Creating a New Wake-Up Session/Editing a Wake-Up Session 187

Index 189

Application Programs - Getting Started GPS1200+ 7

1 Application Programs - Getting Started

1.1 Starting an Application Program

Access an applica-

tion program step-

by-step

XX Begin SURVEY Survey Begin is shown as an example. Additional fields are available for

particular application programs. The first screen of Wake-Up Sessions differs from

XX Begin and is explained in the chapter on Wake-Up Sessions.

Description of fields

Step Description

1. Press PROG. The PROG key opens the application programs menu

GPS1200+ Programs.

2. GPS1200+ Programs

Select an option in the menu.

3. CONT (F1) to access XX Begin.

)Some application programs are protected. They are activated through a

specific licence key. This can either be typed in in Main Menu:

Tools...\Licence Keys or the first time the application program is started.

)Four application programs can be open at one time. XX Begin is shown

for the application program opened first, but not for the following applica-

tion programs.

CONT (F1)

To accept changes and access the

subsequent screen.

CONF (F2)

To configure the application program.

CSYS (F6)

To select a different coordinate

system. Not available for <Use Auto

CrdSys: Yes> configured in CONG-

FIGURE Additional Rover

Settings.

Field Option Description

<Control

Job:>

Choicelist Available for Reference Line. The original points

to be staked and the reference lines/arcs are

stored in this job.

<Stakeout

Job:>

Choicelist Available for Stakeout. The job containing the

points to be staked.

<Job:> Choicelist The active job.

For Stakeout and Reference Line: Points which

are occupied after staking out are stored in this

job. The original points to be staked are not

copied to this job.

8GPS1200+ Application Programs - Getting Started

Description of fields for Determine Coordinate System

Next step

<Coord

System:>

Output The coordinate system currently attached to the

selected <Job:>.

<Codelist:> Choicelist No codes are stored in the selected <Job:>. All

codelists from Main Menu:

Manage...\Codelists can be selected.

Output Codes have already been stored in the selected

<Job.>.

<DTM Job:> Choicelist Available for Stakeout if <Use DTM: DTM only>

and <Use DTM: DTM & Stake Job> in

STAKEOUT Configuration, Heights page.

Available for Reference Line if <Heights: Use

DTM Model> in REFLINE Configuration,

Heights page.

To select a DTM to be staked and to select the

active DTM layer to be used. Heights are then

staked out relative to the selected DTM.

<Config

Set:>

Choicelist The active configuration set.

<Antenna:> Choicelist The antenna currently defined to be used in the

selected configuration set.

Field Option Description

<Name:> User input A unique name for the coordinate system. The

name may be up to 16 characters in length and

may include spaces. Input is mandatory.

)Entering the name of an existing coor-

dinate system will allow that system to

be updated.

<WGS84 Pts

Job:>

Choicelist The job from which the points with WGS84 coor-

dinates will be taken.

<Local Pts

Job:>

Choicelist The job from which the points with local coordi-

nates will be taken.

<Method:> Choicelist Method used to determine the coordinate

system.

IF the application

program

THEN

is to be accessed CONT (F1) accepts the changes and starts the application

program. Refer to the relevant chapters.

Field Option Description

Application Programs - Getting Started GPS1200+ 9

is to be configured CONF (F2). Refer to the relevant chapters.

IF the application

program

THEN

10 GPS1200+ Application Programs - Getting Started

1.2 Configuration of a Logfile

Description A logfile is a summary of the calculations done while using an application program.

The logfile is written to the \DATA directory of the CompactFlash card or internal

memory if fitted. The creation of a logfile can be activated while configuring an appli-

cation program.

Access step-by-

step

Configuration,

Logfile page

Description of fields

Next step

PAGE (F6) changes to the first page on this screen.

Step Description

1. Refer to "1.1 Starting an Application Program" to access XX Begin.

2. CONF (F2) to access XX Configuration.

3. PAGE (F6) until the Logfile page is active.

Field Option Description

<Write

Logfile:>

Yes or No To generate a logfile when the application

program is exited.

<File Name:> Choicelist Available for <Write Logfile: Yes>. The name

of the file to which the data should be written.

<Format

File:>

Choicelist Available for <Write Logfile: Yes>. A format file

defines which and how data is written to a

logfile. Format files are created using LGO.

Otros manuales para GPS1200+

Tabla de contenidos

Otros manuales de GPS de Leica

Leica

Leica MojoMINI Manual de usuario

Leica

Leica apMK12 Manual de usuario

Leica

Leica GPS500 Manual de usuario

Leica

Leica MojoMINI Manual de instalación y funcionamiento

Leica

Leica GG02 Manual de usuario

Leica

Leica T-Scan5 Manual de usuario

Leica

Leica GS20 Manual de usuario

Leica

Leica INEX 1-1296 Manual de usuario

Leica

Leica DistoX2 Manual de usuario

Leica

Leica SR20 Manual de usuario

Leica

Leica GPS1200+ Manual del producto

Leica

Leica T-Scan 5 Manual de usuario

Leica

Leica MojoMINI Manual de usuario

Leica

Leica Digilux 2 Manual de usuario

Leica

Leica iNEX Manual de usuario

Leica

Leica GPS1200 Series Manual de usuario

Leica

Leica RX1250 SmartRover Manual de usuario

Leica

Leica GPS1200 Series Manual del producto

Leica

Leica MX400 Manual de usuario

Leica

Leica GS09 Manual de usuario

Leica

Leica mojo3D Manual de usuario

Leica

Leica GPS System 500 Manual de usuario

Leica

Leica mojo3D Manual de usuario

Leica

Leica mojo 3D Manual de usuario

Manuales populares de GPS de otras marcas

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Manual de usuario

Garmin

Garmin SOUNDER 125 Manual de usuario

Garmin

Garmin DEZL 580 Manual de usuario

Jigabot

Jigabot EX Manual de usuario

Pointer

Pointer Cellocator CelloTrack XT LTE Guía de instalación

Queclink

Queclink GV55LITE Manual de usuario

Voxson

Voxson Voxtrack GPS500 Manual de instrucciones

Garmin

Garmin ECHOMAP PLUS Manual de usuario

Starcom Systems

Starcom Systems Kylos Compact Manual de usuario

Garmin

Garmin 15 H Series Manual de usuario

Cobra

Cobra Marine MC 600Ci Manual de usuario

Cellocator

Cellocator CelloTrack T Manual de usuario

Enfora

Enfora Mini-MT GSM2228UG001 Manual de usuario

Magellan

Magellan eXplorist 100 Manual de usuario

LTE

LTE G50B Manual de usuario

Garmin

Garmin DEZL OTR500 Manual de usuario

SkyGolf

SkyGolf SkyCaddie SG1 Manual de usuario