Lefroy Brooks 1135 Manual de usuario

1135 / 1422 / 1154 / 8022 / 8030 / 8054

BATH AND BASIN PILLAR TAPS

INSTALLATION GUIDE

IMPORTANT INFORMATION

Professional installation

We recommend that our products are ﬁtted

by a fully qualiﬁed professional plumber. They

should be installed correctly and in accordance

with all local water regulations and the system

protected by non-return valves (not supplied).

All products should be accessible for routine

servicing.

Supply temperature safety notice

A thermostatic mixing valve (TMV) should

be ﬁtted (not supplied) to the hot supply to

restrict the temperature to a safe working/

maximum temperature to comply with local

building regulations, current legislation, relevant

standards and codes of practice. Maximum

allowed temperatures vary subject to type of

installation or speciﬁcation of building.

Flushing system

It is most important to ﬂush out all pipework

thoroughly before connecting the taps. This

is the single most common cause of ceramic

cartridge failure.

Supply connections

Lefroy brooks do not supply any pipework or

connections for taps as they can be installed

in a variety of conﬁgurations subject to each

customers installation design or requirement.

Water quality

In hard water areas, a suitable water treatment

system should be provided to prevent limescale

deposits (calcium deposits) which may eect

the long term performance of the ceramic

cartridge. Exterior surfaces should be gently

wiped with a dry soft cloth after use to minimise

water stains and limescale deposits.

General installation details

Basin models have ½" BSP threaded tails and are

designed to ﬁt standard 15mm tap connectors.

Bath models have ¾" BSP threaded tails and are

designed to fit 22mm tap connectors. The white

sealing washer should be fitted to the underside

of the basin/bath/mounting surface, NOT

directly under the tap base.

Servicing

All serviceable parts are available to maintain

your Lefroy brooks product.

90mm

1154

G¾

Ø26mm

26mm max

50mm

Ø50mm

95mm

8054

G¾

Ø26mm

26mm max

50mm

Ø50mm

124mm

8030

Ø21mm

26mm max

50mm

G½

Ø45mm

18mm

85mm

1422

15mm

Ø21mm

26mm max

50mm

G½

Ø45mm

26mm

15mm

90mm

8022

Ø21mm

26mm max

50mm

G½

Ø45mm

24mm

15mm

65mm

1135

Ø21mm

26mm max

50mm

G½

Ø45mm

Bath taps

Long nosed taps

Short nosed taps

DIMENSIONS

Not to scale

10 20 30 40

3.0

2.0

1.0

Flow (Litres/minute)

Static Pressure (Bar)

Outlet (Static)

Bar Litres / min

1 6.0

1.5 14.2

2 21.0

2.5 25

3 28.5

As the valve contains a 3/4” ceramic cartridge, for this

test the ceramic cartridge from the 3/4 deck valve in the

test rig was removed and blanked o giving full ﬂow to the

tap.

Test set up with a 3/4” to 3/4” ﬂexible hose attached.

10 20 30 40

3.0

2.0

1.0

Flow (Litres/minute)

Static Pressure (Bar)

TYPICAL FLOW RATES

Note: Pressures shown are applied directly to the inlets; ﬂow rates indicated are free ﬂowing and may

vary subject to restrictions created by installation, pipework, layout or application.

Basin taps

(The ﬂow rate indicated is for a single tap.)

Bath taps

(The ﬂow rate indicated is for a single tap.)

INSTALLATION

1 Remove the backnut and rubber sealing

washer from the threaded tail of the tap.

2 Locate the threaded tail of the tap through the

hole in the mounting surface.

3 Place the rubber sealing washer onto the

threaded tail of the tap. The raised area in the

centre of the rubber washer must be on top.

4 Locate and screw the backnut onto the

threaded tails.

5 Ensure the tap is aligned correctly then tighten

the backnut.

6 Connect the tap to the water supply.

7 Check for leaks and that the tap operates

correctly.

SERVICING – CARTRIDGE REPLACEMENT

Before continuing please ensure that the

water supplies have been isolated and drained

where necessary. Always support the spout

when removing/ﬁtting handwheel/lever

assemblies or ceramic cartridges.

1 Unscrew and remove the handwheel/lever

assembly in a counterclockwise direction.

Wearing rubber gloves such as those used for

washing up will improve grip.

2 Unscrew and remove the ceramic cartridge

in a counterclockwise direction using a 17mm

spanner.

3 Fit a new ceramic cartridge. Turn the splined

end of the ceramic cartridge so that it is in the

‘o’ position.

4 Fit the handwheel/lever assembly ensuring

that the indice/graphics are correct.

REPLACEMENT PARTS

FAULT FINDING

The tap is turned o but the spout drips continuously.

• Replace the ceramic cartridge. See below for spare part numbers and the ‘servicing – cartridge

replacement’ section

Noisy operation

• Reduce water pressure

Spare cartridges for lever models

PHL035 – Pair of ½" x ¼ turn ceramic cartridges for basin taps

PHL036 – Pair of ¾" x ¼ turn ceramic cartridges for bath taps

Spare cartridges for handwheel models

PHL034 – Pair of ½" x ½ turn ceramic cartridges for basin taps

PHL037 – Pair of ¾" x ½ turn ceramic cartridges for bath taps

Whilst every effort is made to ensure the accuracy of these, they are subject to change without

notice as part of the company’s product development process. The use of trademarks, product design

and artwork is subject to licence or agreement with LBIP Ltd. The design registrations, trademark registrations

and copyrights are protected by law and the use or reproduction outside the terms of an agreement is prohibited.

The right to modify designs and dimensions is reserved. LBIP Ltd is a member of ACID (Anti Copying in Design).

CUSTOMER SUPPORT

+44 (0)1992 708 316

LEFROYBROOKS.CO.UK

20.065.116B / AUGUST 2017

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Producto de plomería de Lefroy Brooks

Lefroy Brooks

Lefroy Brooks M2-4400 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks M1-1017 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks WL 1560 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks R1-4009 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks X1-2000 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks R1-4025 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks CW-2153 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks CW-1010 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks K1-1301 Manual de usuario

Lefroy Brooks

Lefroy Brooks M2-4302 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks R1-4015 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks CB-4060 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks C1-4715 Manual de usuario

Lefroy Brooks

Lefroy Brooks C1-2666 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks R1-4010 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks M2-4701 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks M1-4701 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks CW-4076 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks K1-4202 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks C1-2665 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks Y1-1071 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks M2-4700 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks M1-4400 Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks K1-4302 Instrucciones de montaje

Manuales populares de Producto de plomería de otras marcas

Weka

Weka 506.2020.00E Instrucciones de funcionamiento

Kohler

Kohler K-6228 Instrucciones de montaje

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Manual de usuario

American Standard

American Standard DetectLink 6072121 Manual de usuario

Uponor

Uponor Contec TS Manual de usuario

Pfister

Pfister Selia 49-SL Manual de usuario

Fortis

Fortis VITRINA 6068700 Manual de usuario

Fortis

Fortis MILANO 78211JS Manual de usuario

Kohler

Kohler K-12183 Instrucciones de montaje

Maxxus

Maxxus MX-M206-01 Manual de usuario

Moen

Moen 5922 Series Manual de usuario

Viega

Viega Prevista Pure 8512 Manual de usuario

Kohler

Kohler Centerset K-15240 Instrucciones de montaje

Viega

Viega Prevista Dry 8522.33 Manual de usuario

Sanela

Sanela Lema SLP 59RB Manual de usuario

Elkay

Elkay EDF15AC Manual de instalación

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Manual

baliv

baliv WT-140 Manual de usuario