Larson Electronics EPL-16C-1MLED Manual de usuario

EPL-16C-1MLED

Explosion Proof LED Tank Light

21,000 Lumens LED - Wheelbarrow Cart - 150' Cord

Instruction Manual

Thank you for your purchase of the Larson Electronics EPL-16C-1MLED Explosion Proof LED Tank Light.

WARNING

TO AVOID THE RISK OFFIRE, EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE INSTALLED,

INSPECTED AND MAINTAINED BY A QUALIFIED ELECTRICIAN ONLY, IN ACCORDANCE WITH ALL

APPLICABLE ELECTRICAL CODES.

TO AVOID ELECTRIC SHOCK:

•BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.

•PRODUCT MUST BE CONNECTEDTOA WIRING SYSTEM WITHAN EQUIPMENT-GROUNDING

CONDUCTOR.

TO AVOID EXPLOSION:

•MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.

•ENSURE THE MARKED T RATING IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS

ATMOSPHERE.

•DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVE THOSE INDICATED ON THE PRODUCT

NAMEPLATE.

•DO NOT OPERATE IF THE LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED OR

DAMAGED. IF SO, DISCONTINUE USE AND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.

•ALL FASTENERS SHOULD BE PROPERLY SEATED.

The EPL-16C-1MLED Explosion Proof Portable Tank Light from Larson Electronics is rated Class 1 Division 1-2 Groups

C&D and Class II Division 1-2 and uses Cree LEDs to produce 21,000 lumens of light while drawing only 150 watts.

Larson Electronics, LLC Phone: (877) 348-9680 Fax: (903) 498-3364 www.larsonelectronics.com 1of 2

The light fixture on this wheelbarrow cart is factory sealed.

CART OPERATION

The wheelbarrow cart assembly consists of 2 parts:

1. Light head

2. Wheelbarrow cart base

To assemble cart, insert light head over center hole

of wheelbarrow cart and tighten hand screw. The

wheelbarrow cart is now ready for use.

Tilt cart using both handles and maneuver like a

wheelbarrow. Simply roll entire assembly toa new

location once assembled. Make sure light head is

secure prior to maneuvering cart.

This portable LED cart light has a removable light

head measuring 16 inches in diameter which allows

the unit to fit through the standard sized manholes or

entry passages commonly found in the petrochemical and marine industries. Often simply referred to as a

“tank light”, this unit is considered universal due to its ability to be passed through any conventional manhole

such as those found in petrochemical containers and ship storage tanks.

WARNING: Be sure all hand screws aretight before transporting! Use caution when maneuvering near inclines

or drop offs.

To adjust light head vertically, loosen hand screws on either side. Once desired angle is achieved,

tighten both hand screws to secure light in its place. Loosen the single hand screw holding light head to rotate

horizontally. Be sure all hand screws are tight before transporting!

Larson Electronics, LLC Phone: (877) 348-9680 Fax: (903) 498-3364 www.larsonelectronics.com 2of 2

EPL-16C-1MLED

This unit comes pre-wired from factory with the selected cord cap. Take precautionary steps for

weatherproofing all connections if installed in a location where water may come in contact with the unit. All

outdoor installations and indoor installations near a wet location require the use of a GFCI device for safety,

according to the National Electrical Code® (NEC). Ensure the unit is properly grounded.

Position device near work area for operation. Run cable to nearby power source. Insert and twist-lock

explosion-proof plug into a compatible receptacle within the hazardous environment. See plug operation

below.

WARNING: check nameplate for proper voltage. Damage from improper voltage may void warranty.

PLUG OPERATION

Electrical connection between plug and compatible receptacle is accomplished after plug fully inserts into

receptacle and is rotated clockwise.

1. Lift receptacle door and locate polarization on mating plug pin and receptacle face. Insert plug straight all

the way into receptacle until it cannot go further.

2. Rotate plug clockwise limit (37º), this closes internal contacts and completes circuit. This also

mechanically locks plug into receptacle so it cannot be pulled out.

3. To remove plug, push plug inward and turn to counterclockwise, pull plug straight out.

MAINTENANCE

Caution:To avoid personal injury,disconnect powerto the light and allow theunit to cool down before

performing maintenance.

Warning: No user serviceable parts inside of fixture.Risk of electricshock.Removalof the lenswill void any

warranty.

1. Perform visual,mechanical and electrical inspections on a regular basis.We recommend routine

checks to be made on a yearly basis. Frequency of use and environment shoulddetermine this. It is

recommendedto follow an Electrical Preventive Maintenance Program as described in NFPA 70B:

Recommendedpractice for Electrical Equipment.

2. The lens should be cleaned periodically as neededto ensure continued photometric performance.

Clean the lens with a damp, non-abrasive,lint-free cloth. If not sufficient, use mild soapor a liquid

cleaner.

3. Inspect the cooling fins on the luminaire to ensure that they are free of any obstructions or

contamination (i.e.excessivedust build-up). Clean with a non-abrasive clothif needed.

4. Do not operate if the lens is cracked or damaged. All fasteners shouldbe properly seated.

USE AND CARE

Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.

Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of

children when not in use.Inspect for good working condition prior to storage and before re-use.

REPLACEMENT PARTS

The EPL-16C-1MLED is designed to provide years of reliable performance. Should the need for replacement parts arise,

please contact Larson Electronics.

THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.

SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT

SAL[email protected] OR BY PHONE AT 1-877-348-9680 FOR FURTHER ASSISTANCE.

PLEASE VISIT LARSONELECTRONICS.COM FOR WARRANTY AND RETURN INFORMATION.

Tabla de contenidos

Otros manuales de Luz de trabajo de Larson Electronics

Larson Electronics

Larson Electronics EPL-16C-1MLED-300 Manual de usuario

Larson Electronics

Larson Electronics WAL-QP8-WP60PM-GRC50 Manual de usuario

Larson Electronics

Larson Electronics WAL-DL-60LED-M-GCR50-SP0002 Manual de usuario

Larson Electronics

Larson Electronics EHL-LED-7W-25-1523 Manual de usuario

Larson Electronics

Larson Electronics LEDWP-600E-OS Manual

Larson Electronics

Larson Electronics GL-9900 Manual

Larson Electronics

Larson Electronics EPL-FL-26 Manual de usuario

Larson Electronics

Larson Electronics EPL-QC-16C-2X50LED-RT-100 Manual de usuario

Larson Electronics

Larson Electronics EHL-LED-120X12V-XGFI Series Manual de usuario

Larson Electronics

Larson Electronics EPLC2-MB-100LED-100 Manual de usuario

Larson Electronics

Larson Electronics WAL-WBC-500LTL-LED-100 Manual de usuario

Larson Electronics

Larson Electronics WDL-12-IPS-LED-1227 Manual de usuario

Larson Electronics

Larson Electronics EPL-BS-70LED-6XMB-150X12 Manual

Larson Electronics

Larson Electronics RL-85-LED-36W-CPR Manual de usuario

Larson Electronics

Larson Electronics LEDWP-600E-DLC-5000K Manual de usuario

Larson Electronics

Larson Electronics L810 Manual de usuario

Larson Electronics

Larson Electronics EHL-LED-240X12V-50 Manual de usuario

Larson Electronics

Larson Electronics EPL-QC-16C-2X50LED-RT-X12V-C1D1-12.3-100-EPP Manual de usuario

Larson Electronics

Larson Electronics LEDP5W-12LT Manual de usuario

Larson Electronics

Larson Electronics EHL-LED-15W-50-HR Manual de usuario

Larson Electronics

Larson Electronics WAL-SBDL-WP60E-XX-1227 Manual de usuario

Larson Electronics

Larson Electronics WAL-TP-2X50E-1224 Manual de usuario

Larson Electronics

Larson Electronics WAL-QP-2X500LTL-LED-100 Manual de usuario

Larson Electronics

Larson Electronics WAL-BP-3XLED-CPR Manual de usuario

Manuales populares de Luz de trabajo de otras marcas

ANSMANN

ANSMANN POWERLIGHT 5.1 Manual de usuario

RTRMAX

RTRMAX RTX1868 Manual de usuario

FeinTech

FeinTech LAL00220 Manual de usuario

Bunker Hill Security

Bunker Hill Security 64735 Manual de usuario

Goobay

Goobay 30450 Manual de usuario

REV Ritter

REV Ritter SPOT Manual de usuario

Ignition

Ignition Stagepix Line 100 IP Manual de usuario

SCANGRIP

SCANGRIP DUO CONNECT Manual de usuario

Bosch

Bosch GLI 18 V Manual de usuario

Bayco

Bayco SL-1514 Manual de usuario

EUFAB

EUFAB SMD LED 8+1 Manual de usuario

DeWalt

DeWalt DCL510 Manual de usuario

PowerSmith

PowerSmith PWLD080T Manual de usuario

MaxLite

MaxLite 73683 Manual de usuario

Heitronic

Heitronic Trend 27867 Manual de usuario

Monzana

Monzana Gore MZCL10 Manual de usuario

EINHELL

EINHELL TE-CL 18/2000 LiAC Manual de usuario

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manual de usuario