Labnet BioPette E BE20-1 series Manual de usuario
BioPette E
Single and 8-channel Electronic Pipettes
Operation Manual
Version: 2.7
www.labnetlink.com
Labnet InternationalLabnet International
PO Box 841PO Box 841
Woodbridge, NJ 07095Woodbridge, NJ 07095
USAUSA
Declaration of ConformityDeclaration of Conformity
Product Name: BioPette E Single/8-channel Electronic PipettesProduct Name: BioPette E Single/8-channel Electronic Pipettes
Model Names: BE20-1, BE200-1, BE1000-1, BE20-8, BE 200-8Model Names: BE20-1, BE200-1, BE1000-1, BE20-8, BE 200-8
All models comply with the following European standards:All models comply with the following European standards:
EMC: EN 55011, Class AEMC: EN 55011, Class A
EN 60601-1-2EN 60601-1-2
To the best of my knowledge and belief, these units conform to these
standards.
To the best of my knowledge and belief, these units conform to these
standards.
Name: Mike ReveszName: Mike Revesz
Position: Director of Quality ControlPosition: Director of Quality Control
Issue Date: 2003/4/30Issue Date: 2003/4/30
Copyright Notice:Copyright Notice:
N
o part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose,
without prior written permission of Labnet International, Inc.
N
o part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose,
without prior written permission of Labnet International, Inc.
Table of Contents
1. Safety Precautions...................................................................................1
1.1. Operation Safety Precautions ..........................................................1
1.2. Battery Safety..................................................................................1
2. General Description................................................................................3
2.1. Features............................................................................................3
2.2. Ranges and Specifications...............................................................4
3. Getting Started ........................................................................................4
3.1. Unpacking........................................................................................4
3.2. Inserting the Battery ........................................................................5
3.3. Charging the Battery........................................................................6
3.4. Start Pipetting..................................................................................8
3.5. Hanger Installation ..........................................................................9
4. BioPette E Overview...............................................................................9
4.1. Keypad Function............................................................................13
4.2. Audible Signals .............................................................................13
5. Function Map ........................................................................................15
6. SYS (System) Mode...............................................................................16
6.1. Aspirating Speed............................................................................16
6.2. Dispensing Speed ..........................................................................17
6.3. Audible Signals .............................................................................17
6.4. Tip Ejector Alarm..........................................................................17
6.5. Blow-out........................................................................................18
6.6. Reverse Pipetting...........................................................................18
6.7. Setting PROG (Programs) .............................................................19
6. AUTO Mode 20
7. MD (Multiple Dispensing) Mode .........................................................20
8. MIX Mode 21
9. SE (Sequential Aspirating/Dispensing) Mode.....................................22
10.1. SA (Sequential Aspirating) Mode – Not available on BE1000-1
because the diameter of 1000ul tips does not allow the required air gap to be
maintained...................................................................................................22
10.2. SD (Sequential Dispensing) Mode ................................................24
10. Sterilization 26
11.1. Removal of the Lower Piston Assembly .......................................27
11.2. Reattach the lower piston assembly...............................................28
11. Maintenance 29
12. Troubleshooting.....................................................................................30
Appendix A: Technical Specifications...........................................................32
Appendix B : Tip Ejector Height Adjustment..............................................32
Appendix C: Warranty...................................................................................33
1. Safety Precautions
Before using the BioPette E for the first time, please read this entire
operating manual carefully. To guarantee problem free, safe operation of the
BioPette E, it is essential to observe the following points:
1.1. Operation Safety Precautions
When using infectious, radioactive, toxic and other solutions which
may pose health risks, please observe appropriate safety precautions.
1. Do not use the BioPette E in a potentially explosive environment or
with potentially explosive chemicals.
2. When using organic solvents or corrosive chemicals, please check their
compatibility with the pipette tips and the BioPette E.
3. Repair should be carried out by Labnet authorized service personnel
only. Contact Labnet International, Inc. for information on authorized
service options.
4. Use original spare parts and accessories only.
1.2. Battery Safety
The BioPette E operates on a small but powerful Lithium-ion battery.
Misuse or abuse of the Lithium-ion battery may cause damage or injury
through fire, electric shock, or chemical leakage. Please read and
understand all warnings before using the battery.
1. When storing the battery, do not allow it to come into contact with any
metallic surfaces.
2. Never use the BioPette E while using the DC-in jack to charge the
battery.
1
2
3. Do not incinerate the Lithium battery or expose it to excessive heat.
4. Do not short-circuit, puncture, crush, disassemble, damage, force
over-discharge (reversal) or modify the battery.
5. Do not expose the battery to water or moisture.
6. Do not drop or subject the battery to strong impacts.
7. Only use the battery specified in this BioPette E manual.
8. Only use the specified, battery charging unit or DC-in jack to charge
the battery.
9. Do not use a leaking battery.
10. If charging is not completed within the specified time period, unplug
the charger and discontinue charging immediately.
11. The charger and battery temperature rises with extended periods of use.
Care should be taken to avoid burns.
12. Burns may result if the battery is removed immediately after extended
periods of use.
13. If fluid from the battery enters your eye, immediately rinse the eye with
plenty of fresh water and contact a doctor. If fluid from the battery
makes contact with your skin or clothing, wash the area thoroughly
with water.
2. General Description
Labnet's BioPette E is designed to replace the traditional manual pipette. It
features an accurate and efficient, as well as ergonomic and light-weight
design. Researchers can program this state-of-the-art product to conduct
different pipetting tasks. More accurate and comfortable pipetting can be
easily achieved without any concern of finger stress or injury.
2.1. Features
zHigh accuracy and precision
zLow forces
zUseful, practical operation protocols, such as Automatic
Pipetting(AUTO), Multiple Dispensing(MD), Mixing(MIX), and
Sequential Aspirating/Dispensing (SE), etc.
z9 user-defined program sets
z5 speeds for aspirating and dispensing
zLi-ion battery provides extended use on a single battery charge
zErgonomic design
zAutomatic calibration
zUser-friendly graphic operation interface.
zAdjustable tip ejector.
zAutomatically remembers the last-used pipetting protocol and settings
zComplies with CE, ISO-8655, GLP
3
2.2. Ranges and Specifications
Product No. Channels Volume
Range (µl)
Increment
(µl)
Accuracy
(Rel.±)
Precision
( Rel. CV )
BE20-1-X 1 2 -20 0.1
7.0-1.0% 2.0-0.3%
BE200-1-X 1 10 -200 1 2.5-0.8% 1.0-0.15%
BE1000-1-X 1 100 -1,000 1 3.0-0.8% 0.6-0.15%
BE20-8-X 8 2-20 0.1 7.0-1.0% 2.0-0.3%
BE200-8-X 8 10-200 1 3.5-0.8% 1.0-0.15%
Note:
1. X: power plug, no designation=U.S. plug, EU=European plug,
UK=U.K. plug, AU=Australian plug
2. BioPette E Accuracy and Precision Specifications have been attained
using Labnet brand pipette tips. Labnet guarantees Accuracy and
Precision only if Labnet brand tips or other approved tips are used.
3. Getting Started
3.1. Unpacking
Open the BioPette E package and confirm that all items are included:
zSingle/8-channel BioPette E unit zOperation manual
zQuality assurance card zAC-DC power adaptor
zBioPette E hanger and
accessories zPipette tips
4
If there are any items missing, damaged, or not according to your order,
please contact your distributor or sales representatives for replacement
immediately.
Please charge the battery before first-time operation.
3.2. Inserting the Battery
Figure 1: Open the battery cover. Figure 2: Insert the battery.
Remove the battery cover by pressing the latch (see Figure 1). Insert the
battery (see Figure 2). Metallic contacts must be face down. Close the cover
of the battery compartment. Press the RESET button to power on and
calibrate the BioPette E.
Note: After a charged battery is inserted, the BioPette E will automatically
carry out a calibration routine.
5
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Equipo de laboratorio de Labnet
Labnet
Labnet C0336 Manual de usuario
Labnet
Labnet Prism Manual de usuario
Labnet
Labnet S0200 Manual de usuario
Labnet
Labnet D0100 Manual de usuario
Labnet
Labnet BioPette 5A Manual de usuario
Labnet
Labnet D1100 Manual de usuario
Labnet
Labnet BioPette PLUS Manual de usuario
Labnet
Labnet Orbit S2030-LS-B-230 Manual de usuario
Labnet
Labnet Z100-A Manual de usuario
Labnet
Labnet Spectrafuge 24D Manual de usuario
Labnet
Labnet Spectrafuge 6C Manual de usuario
Labnet
Labnet BioPette A Series Manual de usuario
Labnet
Labnet ENDURO GEL XL E0160 Manual de usuario
Labnet
Labnet Spectrafuge C1301 Manual de usuario
Labnet
Labnet FASTPETTE Manual de usuario
Labnet
Labnet ENDURO VE10 Manual de usuario
Labnet
Labnet Spectrafuge 16M Manual de usuario
Labnet
Labnet MultiGene OptiMax Thermal Cycler Manual de usuario
Labnet
Labnet VorTemp 1550 Manual de usuario
Labnet
Labnet FASTPETTE PRO Manual de usuario
Manuales populares de Equipo de laboratorio de otras marcas
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manual de usuario
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manual de usuario
NI
NI PXI-5422 Manual
Collomix
Collomix Aqix Manual de usuario
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario
Ocean Insight
Ocean Insight FLAME-NIR+ Manual de usuario
