KYLAND KIEN1008BA Series Instrucciones de montaje

KIEN1008BA Industrial Ethernet Switch

Hardware Installation Manual

Publication Data: Dec. 2013

Version: V1.1

No.: 1.12.02.1053-0

KIEN1008BA Industrial Ethernet Switch

Hardware Installation Manual

Disclaimer:

Kyland Technology Co., Ltd. tries to keep the content

of this manual as accurate and as updated as possible. This

document is not guaranteed to be error-free, and we reserve the

right to amend it without notice to users.

No part of this documentation may be excerpted, reproduced,

translated, annotated or duplicated, in any form or by any means

without the prior written permission of KYLAND Corporation.

Notice for Safety Operation

The product performs reliably as long as it is used accord-

ing to the guidance. Artificial damage or destruction of the

device should be avoided. Before using the device, read

this notice carefully for personal and equipment safety.

Please keep the manual for further reference. Kyland is

not liable to any personal or equipment damage caused

by violation of this notice.

●Do not place the device near water sources or damp areas. Keep

the ambient relative humidity within the range from 5% to 95%

(non-condensing).

●Do not place the device in an environment with high magnetic field,

strong shock, or high temperature. Keep the working and storage

temperatures within the allowed range.

●Install and place the device securely and firmly.

●Please keep the device clean; if necessary, wipe it with a soft cotton

cloth.

●Do not place any irrelevant materials on the device or cables. Ensure

adequate heat dissipation and tidy cable layout without knots.

●Wear antistatic gloves or take other protective measures when

operating the device.

●Avoid any exposed metal wires because they may be oxidized

or electrified.

●Install the device in accordance with related national and local

regulations.

●Before power-on, make sure the power supply is within the allowed

range of the device. High voltage may damage the device.

●Power connectors and other connectors should be firmly interconnected.

●Do not plug in or out the power supply with wet hands. When the device

is powered on, do not touch the device or any parts with wet hands.

●Before operating a device connected to a power cable, remove all

jewelry (such as rings, bracelets, watches, and necklaces) or any

other metal objects, because they may cause electric shock or burns.

●Do not operate the device or connect or disconnect cables during

an electrical storm.

●Use compatible connectors and cables. If you are not sure, contact

our sales or technical support personnel for confirmation.

●Do not disassemble the device by yourself. When an anomaly

occurs, contact our sales or technical support personnel.

●If any part is lost, contact our sales or technical support personnel

to purchase the substitute. Do not purchase parts from other channels.

●Dispose of the device in accordance with relevant national provisions,

preventing environmental pollution.

In the following cases, please immediately shut down

your power supply and contact your Kyland represen-

tative:

●Water gets into the equipment.

●Equipment damage or shell damage.

●Equipment operation or performance has abnormally changed.

●The equipment emits odor, smoke or abnormal noise.

1 Product OverviewĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ1

2 Structure and InterfaceĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ2

2.1 Front Panel

ĂĂĂĂĂĂĂĂĂĂĂ ĂĂĂĂĂĂĂ Ă Ă

2.2 Top Panel

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

3 Mounting

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

3.1 Dimension Drawing

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

3.2 Mounting Modes and Steps

ĂĂĂĂĂĂĂĂĂĂĂĂĂ

3.2.1 DIN-Rail MountingĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

3.2.2 Panel MountingĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

4 Connection

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

4.1 10/100Base-T(X) Ethernet Port

ĂĂĂĂĂĂĂĂĂĂĂ

4.2 100Base-FX Ethernet Port

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

4.3 Grounding

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

4.4 Power Terminal Block

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

5 LEDs

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

6 Basic Features and Specifications

ĂĂĂĂĂĂĂĂĂĂĂĂĂ

Contents

1 Product Overview

KIEN1008BA includes a series of green, intrinsically safe industrial

Ethernet switches developed by Kyland with low power consumption.

Equipped with high-performance switching engine, the series switches

comply with intrinsically safe design.

KIEN1008BA has two forms: integrated device and bare board. An integrated

device supports both DIN-rail mounting and panel mounting, while a bare

board can be installed in another device. KIEN1008BA provides eight

100M cooper or fiber (optional) ports. For details, see the following table.

Product Overview

Table 1 KIEN1008BA Models

ƽIf conformal coating is required, add “-C” before port description.

ƽWe reserve the right to amend the product information listed

in this table without notice. To obtain the latest information,

contact our sales or technical support personnel.

Note:

Structure and Interface

2 Structure and Interface

Figure 1 Front Panel of KIEN1008BA-6S/M-2T

2.1 Front Panel

(2)(1)

(3) (5)

(7)

(6)

(8)

(4)

Caution:

It is recommended to purchase the port dustproof shield

(optional) to keep ports clean and ensure switch performance.

Structure and Interface

Table 2 Description

Figure 2 KIEN1008BA-EM-6S/M-2T (bare board)

(9)

(1) (2)

(5)

(7)

(6)

(8)

(3)

(4)

Structure and Interface

Figure 3 Top Panel

Table 3 Description of the Top Panel

2.2 Top Panel

PWR1

+/L -/N -/N +/L

PWR2

(1) (2)

+/L -/N -/N +/L

PWR1 PWR2

No. Identifie

Description

(1) Power terminal block

(2) -- Grounding screw

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de KYLAND

KYLAND

KYLAND Aquam8112 Series Instrucciones de montaje

KYLAND

KYLAND SICOM3024P Instrucciones de montaje

KYLAND

KYLAND SICOM6448G Series Instrucciones de montaje

KYLAND

KYLAND KIEN6000T Manual de usuario

KYLAND

KYLAND KIEN1026 Instrucciones de montaje

KYLAND

KYLAND Aquam5G Series Instrucciones de montaje

KYLAND

KYLAND SICOM3000S Instrucciones de montaje

KYLAND

KYLAND SICOM3008GV Series Instrucciones de montaje

KYLAND

KYLAND SICOM3000A-LITE Instrucciones de montaje

KYLAND

KYLAND Aquam5S Series Manual de usuario

KYLAND

KYLAND Aquam8012A-1U Series Instrucciones de montaje

KYLAND

KYLAND Aquam5 Series Instrucciones de montaje

KYLAND

KYLAND SICOM3014GV Instrucciones de montaje

KYLAND

KYLAND Opal5G Series Instrucciones de montaje

KYLAND

KYLAND Ruby3A Instrucciones de montaje

KYLAND

KYLAND SICOM6432G Series Instrucciones de montaje

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario