Kramer TP-789Rxr Manual de usuario

TP-789Rxr Quick Start (P/N: 2900-301008QS REV 1)

P/N:

2900- 301008QS

Rev:

Scan for full manual

TP-789Rxr Quick Start Guide

This guide helps you install and use your TP-789Rxr for the first time.

Go to www.kramerav.com/downloads/TP-789Rxr to download the latest user manual and check iffirmware

upgrades are available.

Step 1: Check what’s in the box

TP-789Rxr HDMI Line Receiver

4 Rubber feet

1 Quick start guide

1 Power adapter and cord

1 Bracket set

Step 2: Get to know your TP-789Rxr

Feature

Function

SETUP DIP-switches

Set the operation DIP-switches.

IN LED

Lights green when an active, far-end source device input signal is

detected.

OUT LED

Lights green when an active sink (acceptor) output signal is detected

via the HDBT link.

LINK LED

Lights green when an HDBT link is established with the HDBT

transmitter.

POE FEEDER LED

Lights green when the device is feeding PoE power to the HDBT

connected transmitter.

ON LED

Lights green when the device receives power either from the power

supply unit or by PoE.

HDBT IN RJ-45 Connector

Connect to the RJ-45 HDBT OUT connector on a transmitter (for

example, WP-20, TP-780Txr).

HDMI OUT Connector

Connect to an HDMI acceptor.

ETHERNET RJ-45 Connector

For LAN extension to the transmitter.

IR 3.5mm Mini Jack Connector

Connect to an external infrared emitter / sensor.

RS-232 (G, Rx, Tx) 3-pin Terminal Block Connector

Connects to an RS-232 port for serial link extension to a transmitter.

48V DC Power Terminal Block Connector

If TP-789Rxr provides PoE, connect it to the Kramer power supply.

If it accepts PoE, no power connection is needed.

Step 3: Install TP-789Rxr

Install TP-789Rxr using one of the following methods:

Attach the rubber feet and place the unit on a flat surface.

Fasten a bracket (included) on each side of the unit and attach it to a flat surface. For

more information go to

www.kramerav.com/downloads/TP-789Rxr.

Mount the unit in a rack using an optional RK-3T rack adapter.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your TP-789Rxr. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to TP-789Rxr.

Connecting TP-789Rxr as a power provider:

Connecting TP-789Rxr as a power acceptor:

RJ-45 Pinout:

DIP-Switch Settings

For the HDBT connector, see the wiring diagram below:

All DIP-switches are set to OFF (up) by default.

Changes to DIP-switch 4 only takes effect after

rebooting the device.

PIN EIA /TIA 568B

Wire Color

Feature

Dip-switch Settings

Orange / White

HDBT Range

Mode

OFF –Normal HDBT range.

ON –HDBT ultra-long range (provides

increased range at a reduced bandwidth).

Orange

Green / White

Reserved

For future use. Set to OFF (up).

Blue

IR Frequency

OFF –IR frequency is 38kHz.

ON –Wide-range modulated IR frequency.

Blue / White

Green

FW Upgrade

OFF –Normal operation mode.

ON –FW upgrade mode.

Brown / White

Brown

When set to ON device operation is

disabled.

For optimum range and performance use the

recommended Kramer cables available at

www.kramerav.com/product/TP-789Rxr.

Step 5: Connect the power

When used as a PoE provider, connect the 48V DC power supply to TP-789Rxr and plug it into the mains electricity (to also provide

power to a transmitter).

When accepting power from an HDBT transmitter via PoE there is no need to connect the 48V DC power supply.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Use only the Kramer Electronics power adapter that is provided with the unit.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

See www.KramerAV.com for updated safety information.

Step 6: Operate TP-789Rxr

Upgrade the firmware by:

•Setting the DIP-switches.

•Loading the new firmware via

the RS-232 port on the

TP-789Rxr.

RS-232 Pass-through Data

Baud Rate:

115,200

Data Bits:

Stop Bits:

Parity:

None

Command Format:

ASCII

Technical Specifications

Input

HDBT

On an RJ-45 connector

Output

HDMI

On a female HDMI connector

Ports

RS-232

On a 3-pin terminal block connector for serial link extension

On a 3.5mm mini-jack connector for IR link extension

100BaseT Ethernet

On an RJ-45 female connector for LAN extension

Video

Max Bandwidth

10.2Gbps

Max Resolution

4K@60 (4:2:0)

Compliance

HDMI 2.0 and HDCP 2.2

Extension

4k@60 (4:2:0) Range

Up to 100m (330ft)

Full HD (1080p@60Hz) Range

Up to 130m (430ft) at HDBT normal range mode, up to 180m (590ft) at

HDBT ultra-long-range mode

Compliance

HDBaseT 1.0

Extended Ethernet

Bandwidth

Up to 100Mbps

Extended RS-232

Baud Rate

300 to 115200 baud

Extended IR

Frequency

20kHz to 100kHz

Direction

Bidirectional (IR sensor or emitter)

Controls

Front Panel

IN, OUT, LINK, POE FEEDER and ON LED indicators

Rear Panel

DIP-switches

Power

Consumption

48V DC, 370mA

With PoE

13Watt

Source

48V DC, 1.36A

Environmental

Conditions

Operating Temperature

0° to +40°C (32° to 104°F)

Storage Temperature

-40° to +70°C (-40° to 158°F)

Humidity

10% to 90%, RHL non-condensing

Regulatory Compliance

Safety

Environmental

RoHs, WEEE

Enclosure

Size

Tool

Type

Aluminum

Cooling

Convection ventilation

General

Net Dimensions (W, D, H), each

12cm x 7.2cm x 2.4cm

(4.7" x 2.8" x 0.94")

Shipping Dimensions (W, D, H)

15.7cm x 12cm x 8.7cm

(6.2" x 4.7" x 3.4")

Net Weight, each

0.2kg (0.44bs) approx.

Shipping Weight

0.72kg (1.6lbs) approx.

Accessories

Included

1 Power adapter, 1 power cord and 1bracket set per device

Optional

RK-3T rack adapter

Specifications are subject to change without notice at www.kramerav.com

Otros manuales de Receptor de Kramer

Kramer

Kramer TP-551HDCP Manual de usuario

Kramer

Kramer WPN-12 Manual de usuario

Kramer

Kramer 670T Manual de usuario

Kramer

Kramer VP-427X1 Manual de usuario

Kramer

Kramer 706XL Manual de usuario

Kramer

Kramer 690T Manual de usuario

Kramer

Kramer TP-305A Manual de usuario

Kramer

Kramer TP-590Rxr Manual de usuario

Kramer

Kramer 640T Manual de usuario

Kramer

Kramer TP-31 Manual de usuario

Kramer

Kramer DigiTOOLS KW-11T Manual de usuario

Kramer

Kramer DigiTOOLS TP-580RA Manual de usuario

Kramer

Kramer KIT-400 Manual de usuario

Kramer

Kramer RC-IR2 Manual de usuario

Kramer

Kramer 690R Manual de usuario

Kramer

Kramer TOOLS TP-220HD Manual de usuario

Kramer

Kramer TP-46N Manual de usuario

Kramer

Kramer 616R Manual de usuario

Kramer

Kramer 640T Manual de usuario

Kramer

Kramer TP-200 Manual de usuario

Kramer

Kramer WP-28 Manual de usuario

Kramer

Kramer 708 Manual de usuario

Kramer

Kramer 717 Manual de usuario

Kramer

Kramer KIT-500 Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario

Dish Network

Dish Network Satellite Television Manual de usuario