Kramer VS-88HD Manual de usuario

Kramer Electronics, Ltd.

USER MANUAL







Model:

VS-88HD

8x8 SD/HD-SDI Matrix Switcher

Contents

Introduction 1

Getting Started 1

2.1

Quick Start 1

Overview 3

Your VS-88HD 8x8 SD/HD-SDI Matrix Switcher 3

Installing on a Rack 6

Connecting Your VS-88HD 8x8 SD/HD-SDI Matrix Switcher 7

6.1

DIP-switch Settings 8

6.1.1

Setting the Machine # DIP-switches 9

6.2

Controlling via RS-232 (for example, using a PC) 9

6.3

Controlling via the RS-485 Port 10

6.4

Genlock Switching 11

Operating the VS-88HD 12

7.1

Switching OUT-IN Combinations 12

7.2

Confirming Settings 12

7.2.1

Toggling between the AT ONCE and CONFIRM Modes 13

7.2.2

Switching in Confirm Mode 13

7.3

Storing/Recalling Input/Output Configurations 13

7.3.1

Storing an Input/Output Configuration 14

7.3.2

Recalling an Input/Output Configuration 14

Technical Specifications 14

Table of Hex Codes for Serial Communication 15

Kramer Protocol 2000 16

Figures

Figure 1: VS-88HD 8x8 SD/HD-SDI Matrix Switcher 4

Figure 2: Connecting the VS-88HD 8x8 SD/HD-SDI Matrix Switcher 8

Figure 3: DIP-switches 8

Figure 4: Connecting a PC without using a Null-modem Adapter 9

Figure 5: Controlling via RS-485 (for example, using an RC-3000) 10

Tables

Table 1: Front Panel VS-88HD 8x8 SD/HD-SDI Matrix Switcher 5

Table 2: Rear Panel VS-88HD 8x8 SD/HD-SDI Matrix Switcher 5

Table 3: Machine # DIP-switch Settings 9

Table 4: Technical Specifications of the VS-88HD 8x8 SD/HD-SDI Matrix Switcher 14

Table 5: VS-88HD Hex Codes for Switching via RS-232/RS-485 15

Table 6: Protocol Definitions 16

Table 7: Instruction Codes for Protocol 2000 17

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast

range of problems that confront the video, audio, presentation, and

broadcasting professional on a daily basis. In recent years, we have

redesigned and upgraded most of our line, making the best even better! Our

1,000-plus different models now appear in 11 groups

that are clearly defined

by function.

Congratulations on purchasing your Kramer VS-88HD 8x8 SD/HD-SDI

Matrix Switcher. This product is ideal for:

Professional broadcasting and production studios

Presentation applications

The package includes the following items:

VS-88HD 8x8 SD/HD-SDI Matrix Switcher

Power cord, Null-modem adapter and this user manual

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Use Kramer high performance high resolution cables

2.1 Quick Start

This quick start chart summarizes the basic setup and operation:

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4:

Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories

and Rack Adapters; GROUP 11: Sierra Products

2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com

3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

Overview

3 Overview

The VS-88HD is an HDTV compatible high performance matrix switcher

for HD-SDI and SDI digital video signals. It lets you simultaneously route

any of the eight inputs to any or all of the eight outputs. In particular, the

VS-88HD features:

Input and output signals on BNC connectors

A looping analog sync input with selectable sync signal termination

Switching synchronization, letting you synchronize to either the external

reference or incoming video

Equalization on each input

Each input button on the front panel automatically lights up when the

VS-88HD detects a video signal on that input

Switching according to the Bi-level or Tri-level Genlock input

The storing and recalling of setups

A Take button for the execution of multiple switches all at once

A 7-segment display

The VS-88HD, which is housed in a 19" 1U rack mountable enclosure, and is

fed from a 90-240 VAC universal switching power supply, can be controlled

via the:

Front panel buttons

Remotely, by RS-232 or RS-485 serial commands transmitted by a touch

screen system, PC, or other serial controller

To achieve the best performance:

Connect only good quality connection cables, thus avoiding interference,

deterioration in signal quality due to poor matching, and elevated noise

levels (often associated with low quality cables)

Avoid interference from neighboring electrical appliances that may

adversely influence signal quality and position your Kramer VS-88HD

away from moisture, excessive sunlight and dust

4 Your VS-88HD 8x8 SD/HD-SDI Matrix Switcher

Figure 1, Table 1, and Table 2 define the VS-88HD 8x8 SD/HD-SDI Matrix

Switcher.

1 Switching is implemented during the vertical interval period according to the SMPTE RP-168 standard, when using

synchronized SDI sources

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your VS-88HD 8x8 SD/HD-SDI Matrix Switcher

Figure 1: VS-88HD 8x8 SD/HD-SDI Matrix Switcher

Your VS-88HD 8x8 SD/HD-SDI Matrix Switcher

Table 1: Front Panel VS-88HD 8x8 SD/HD-SDI Matrix Switcher

# Feature Function

1 POWER Switch Illuminated switch for turning the unit ON or OFF

2 OFF Button An OFF-OUT combination disconnects that output from the inputs; an

OFF-ALL combination disconnects all the outputs

3 ALL Button Pressing ALL followed by an INPUT button, connects that input to all

outputs

4 IN SELECT Buttons Select the input to switch to the output

5 OUT SELECT Buttons Select the output to which the input is switched

6 STO (STORE) Button Pressing STO followed by an INPUT / OUTPUT button stores the current

setting

7 RCL (RECALL) Button Pressing the RCL button and the corresponding INPUT / OUTPUT key

recalls a setup from the non-volatile memory

8 TAKE Button Pressing TAKE toggles the mode between the CONFIRM mode

and the

AT ONCE mode (user confirmation per action is unnecessary)

9 7-segment Display Displays the selected input switched to the output (marked above each

input)

INPUT STATUS LEDs Lights when the input signal complies with the SDI standard

Table 2: Rear Panel VS-88HD 8x8 SD/HD-SDI Matrix Switcher

# Feature Function

INPUT BNC Connectors Connect to the serial digital video sources

OUTPUT BNC Connectors Connect to the serial digital video acceptors

LOOP BNC Connector Connect to the Genlock connector of the next unit in the line

SYNC BNC Connector Connect to the Genlock source

75TERM Button Press to terminate the Genlock source (75) or release for looping

RS-232 IN 9-pin D-sub

Female Port Connects to the PC or the Remote Controller

RS-232 OUT 9-pin D-sub

Male Port Connects to the RS-232 IN DB 9F port of the next unit in the

daisy-chain connection

MACHINE # DIP-switches Dipswitches for setup of the unit (1, 2, 3 and 4 are for setting the

Machine #; 8 is for RS 485 Termination)

RS-485 Detachable

Terminal Block Port

The SYNC and the G PINs are for vertical sync and the ground

connection respectively; pins A (+) and B (-) are for RS-485

Power Connector with Fuse AC connector enabling power supply to the unit

1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs

2 For example, press STO and then the Output button # 3 to store in Setup # 3

3 When in Confirm mode, the TAKE button illuminates

4 Push in to terminate the input. Release when the input extends to another unit

5 Via a null-modem connection

6 The ground connection is sometimes connected to the shield of the RS-485 cable. In most applications, the ground is not

connected

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Installing on a Rack

5 Installing on a Rack

This section describes what to do before installing in a rack and how to rack

mount.

Before Installing in a Rack How to Rack Mount

Before installing in a rack, be sure that the environment is

within the recommended range:

Operating temperature range +5°to +45°C (41°to 113°F)

Operating humidity range 10 to 90% RHL, non-condensing

Storage temperature range -20°to +70°C (-4°to 158°F)

Storage humidity range 5 to 95% RHL, non-condensing



CAUTION!!

When installing on a 19" rack, avoid hazards by taking

care that:

1. It is located within the recommended environmental

conditions, as the operating ambient temperature of a

closed or multi unit rack assembly may exceed the

room ambient temperature.

2. Once rack mounted, enough air will still flow around

the machine.

3. The machine is placed straight in the correct

horizontal position.

4. You do not overload the circuit(s). When connecting

the machine to the supply circuit, overloading the

circuits might have a detrimental effect on overcurrent

protection and supply wiring. Refer to the appropriate

nameplate ratings for information. For example, for

fuse replacement, see the value printed on the

product label.

5. The machine is earthed (grounded) in a reliable way

and is connected only to an electricity socket with

grounding. Pay particular attention to situations where

electricity is supplied indirectly (when the power cord

is not plugged directly into the socket in the wall), for

example, when using an extension cable or a power

strip, and that you use only the power cord that is

supplied with the machine.

To rack-mount a machine:

1. Attach both ear brackets to the

machine. To do so, remove the

screws from each side of the

machine (3 on each side), and

replace those screws through the

ear brackets.

2. Place the ears of the machine

against the rack rails, and insert the

proper screws (not provided)

through each of the four holes in the

rack ears.

Note that:

In some models, the front panel

may feature built-in rack ears

Detachable rack ears can be

removed for desktop use

Always mount the machine in the

rack before you attach any cables

or connect the machine to the

power

If you are using a Kramer rack

adapter kit (for a machine that is not

19"), see the Rack Adapters user

manual for installation instructions

(you can download it at:

http://www.kramerelectronics.com)

Connecting Your VS-88HD 8x8 SD/HD-SDI Matrix Switcher

6 Connecting Your VS-88HD 8x8 SD/HD-SDI Matrix Switcher

You can use your VS-88HD to switch one of the eight standard definition /

high definition SDI inputs to any or all of the eight standard definition / high

definition SDI outputs, as the example in Figure 2 shows.

To connect the VS-88HD 8x8 SD/HD-SDI Matrix Switcher, do the following

1. Connect up to eight SDI sources to the SDI INPUT BNC connectors (for

example, an HD/SD SDI camera to input 1 and an SDI player to input 8).

2. Connect the SDI OUTPUT BNC connectors to up to

eight SDI acceptors

(for example, output 1 to a non linear editor, and output 8 to an HD SDI

display).

3. Set the DIP-switches (see section 6.1).

4. As an option

, connect:

A Genlock source to the SYNC BNC connector

The LOOP BNC connector to the GENLOCK connector of the next

unit in the line, and release the TERM button for looping

5. Connect a PC and/or controller (if required), to the:

RS-232 port (see section 6.2), and/or

RS-485 port (see section 6.3), and/or

6. Connect the power cord

1 Switch OFF the power on each device before connecting it to your VS-88HD. After connecting your VS-88HD, switch on

its power and then switch on the power on each device

2 When only one output is required, connect that output, and leave the other outputs unconnected

3 Not illustrated in Figure 2

4 Pushed in terminates the input. Release when the input extends to another unit (see section 6.4)

5 We recommend that you use only the power cord that is supplied with this machine

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting Your VS-88HD 8x8 SD/HD-SDI Matrix Switcher

Figure 2: Connecting the VS-88HD 8x8 SD/HD-SDI Matrix Switcher

6.1 DIP-switch Settings

By default, DIP-switches 2, 3 and 4 are set to ON (for setting the machine

number to 1) and the other DIP-switches are set to OFF. Figure 3 illustrates

the VS-88HD DIP-switches:

Figure 3: DIP-switches

Otros manuales para VS-88HD

Tabla de contenidos

Otros manuales de Conmutador de matriz de Kramer

Kramer

Kramer VS-42HDMI Manual de usuario

Kramer

Kramer 21-70686010 Manual de usuario

Kramer

Kramer VS-81HD Manual de usuario

Kramer

Kramer VS-62DT Manual de usuario

Kramer

Kramer Sierra Pro XL 1208V5S Manual de usuario

Kramer

Kramer VS-44DT Manual de usuario

Kramer

Kramer VS-808DS Manual de usuario

Kramer

Kramer VP-4x4K Manual de usuario

Kramer

Kramer 88V5S Manual de usuario

Kramer

Kramer Sierra Pro XL 1204V5 Manual de usuario

Kramer

Kramer VS-42UHD Manual de usuario

Kramer

Kramer VS-1616A Manual de usuario

Kramer

Kramer Cobra MX-1616 Manual de usuario

Kramer

Kramer Cobra MX-88 Manual de usuario

Kramer

Kramer VP-778 Manual de usuario

Kramer

Kramer Sierra Video 1616V5S Manual de usuario

Kramer

Kramer VS-42HN Manual de usuario

Kramer

Kramer VP-8x8TP Manual de usuario

Kramer

Kramer VP-4x8AK Manual de usuario

Kramer

Kramer XL 1208V2S Manual de usuario

Kramer

Kramer VP-32K Manual de usuario

Kramer

Kramer VP-4x4 Manual de usuario

Kramer

Kramer XL 1204V2 Manual de usuario

Kramer

Kramer VS-88HD Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Roland

Roland XS-1HD Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario

Extron electronics

Extron electronics MTPX Plus Series Manual de usuario

Key Digital

Key Digital Champion KD-16x16CS Manual de usuario

Shinybow USA

Shinybow USA SB-8811 Manual de usuario

Optimus

Optimus Compact Manual de usuario