Kramer VS-88DVI Manual de usuario

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VS-88DVI

8x8 DVI Matrix Switcher

P/N: 2900-000592 Rev 3

VS-88DVI – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Defining the VS-88DVI 8x8 DVI Matrix Switcher 4

3.2Using the IR Transmitter 7

4Installing in a Rack 8

5Connecting the VS-88DVI 9

6Operating the VS-88DVI 11

6.1 Routing Inputs to Outputs 11

6.2 Disconnecting the Outputs 11

6.3 Storing and Recalling a Setup 11

6.4 Acquiring the EDID 13

6.5 Connecting the VS-88DVI Using RS-232 15

6.6 Connecting the VS-88DVI Using Ethernet 16

7Technical Specifications 19

8Hex Table 20

9Protocol 2000 21

9.1 Syntax 21

9.2 Instruction Codes 22

Figures

Figure 1: VS-88DVI 8x8 DVI Matrix Switcher Front Panel 5

Figure 2: VS-88DVI 8x8 DVI Matrix Switcher Rear Panel 6

Figure 3: Connecting the VS-88DVI 8x8 DVI Matrix Switcher 10

Figure 4: SELECTOR Buttons 12

Figure 5: Crossed Cable RS-232 Connection 15

Figure 6: Local Area Connection Properties Window 17

Figure 7: Internet Protocol (TCP/IP) Properties Window 17

VS-88DVI - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer VS-88DVI 8x8 DVI Matrix Switcher,

which is ideal for the following typical applications:

•Projection systems in conference rooms, boardrooms, auditoriums, hotels

and churches, production studios

•Rental and staging

2 VS-88DVI - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer VS-88DVI away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

VS-88DVI - Getting Started 3

2.2 Safety Instructions

Caution: There are no operator serviceable parts inside the unit

Warning: Use only the power cord that is supplied with the unit

Warning: Do not open the unit. High voltages can cause

electrical shock! Servicing by qualified personnel only

Warning: Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4 VS-88DVI - Overview

3 Overview

The VS−88DVI is a high−performance matrix switcher for DVI signals. The unit

reclocks and equalizes the signal and can route any or all inputs to any or all

outputs simultaneously.

DVI-D (Digital). Note that only the digital signal (DVI-D) is available on the DVI connector.

The VS-88DVI features:

•A maximum data rate of 6.75Gbps (2.25Gbps per graphic channel)

•HDTV compatibility

•Kramer Equalization & re-Klocking™ Technology that rebuilds the digital

signal integrity to travel longer distances

•I-EDIDPro™ Kramer Intelligent EDID Processing™ an intelligent EDID

handling & processing algorithm that ensures Plug and Play operation for

DVI systems

•Flexible control options: front panel, IR remote, RS−232, Ethernet

•Output disconnect for each output

•Front panel lockout

•16 memory locations that store multiple switches as presets

•A 100−240V AC worldwide power supply

•A standard 19” rack mount size, 2U with rack “ears” included

Control the VS-88DVI using the front panel buttons, or remotely via:

•RS-232 serial commands

•The Kramer infrared remote control transmitter

•The Ethernet

•An optional external remote IR receiver

3.1 Defining the VS-88DVI 8x8 DVI Matrix Switcher

This section defines the VS-88DVI.

VS-88DVI - Overview 5

VS-88DVI – Overview 5

Figure 1: VS-88DVI 8x8 DVI Matrix Switcher Front Panel

# Feature Function

1 IR Receiver LED The yellow LED is illuminated when receiving signals from the infrared remote control transmitter

2 POWER LED Illuminates green when receiving power

3 ALL Button Use ALL to select all outputs (see Section 6.1)

4 OFF Button Use OFF to disconnect one or all outputs (see Section 6.2)

5 SELECT IN Press an INPUT selector button to select an input (from 1 to 8)

6 SELECT OUT Press an OUTPUT selector button to select an output (from 1 to 8)

7 STO Button Press to store the present setup

8 RCL Button Press to recall a saved setup

9 EDID Button Press to acquire the EDID (see Section 6.4) (illuminates when configuring the EDID)

10 LOCK Button Press to toggle disengaging the front panel buttons and to acquire the EDID

11 7-segment Display Displays the status of the inputs switched to the outputs (marked above each input)

6 VS-88DVI - Overview

Figure 2: VS-88DVI 8x8 DVI Matrix Switcher Rear Panel

# Feature Function

12 OUT DVI Connectors Connect to the DVI acceptors (from 1 to 8)

13 IN DVI Connectors Connect to the DVI sources (from 1 to 8)

14 RS-232 9-pin D-sub Port Connects to the PC or the RS-232 Remote Controller

15 Ethernet Connector Connects to the PC or other Ethernet Controller

16 RESET Button Press the reset button to reset to the Ethernet factory default definitions:

IP number −192.168.1.39

Mask – 255.255.255.0

Gateway – 192.168.1.1

First disconnect the power cord and then connect it again while pressing the RESET button. The unit powers

up and loads its memory with the factory default definitions

17 REMOTE IR Opening Connects to an external IR receiver unit for controlling the machine via an IR remote controller instead

of using the front panel IR receiver

Covered by a cap. The 3.5mm connector at the end of the internal IR connection cable fits through this

opening

Optional. Can be used instead of the front panel (built-in) IR receiver to remotely control the machine (only if

the internal IR connection cable has been installed)

18 Power Connector with Fuse AC connector enabling power supply to the unit

19 Power Switch Switch for turning the unit ON or OFF

6VS-88DVI – Overview

VS-88DVI - Overview 7

3.2 Using the IR Transmitter

You can use the RC-IR3IR transmitter to control the machine via the built-in IR

receiver on the front panel or, instead, via an optional external IR receiver (Model:

C-A35M/IRR-50). The external IR receiver can be located up to 15 meters away

from the machine. This distance can be extended to up to 60 meters when used

with three extension cables (Model: C-A35M/A35F-50).

Before using the external IR receiver, be sure to arrange for your Kramer dealer to

insert the internal IR connection cable (P/N: 505-70434010-S) with the 3.5mm

connector that fits into the REMOTE IR opening on the rear panel. Connect the

external IR receiver to the REMOTE IR 3.5mm connector.

Otros manuales para VS-88DVI

Tabla de contenidos

Otros manuales de Conmutador de matriz de Kramer

Kramer

Kramer 88HD Manual de usuario

Kramer

Kramer Sierra Pro XL 1208V3 Manual de usuario

Kramer

Kramer VP-4x4 Manual de usuario

Kramer

Kramer VS-3232Vxl Manual de usuario

Kramer

Kramer VS-1604 Manual de usuario

Kramer

Kramer VS-88HD Manual de usuario

Kramer

Kramer VS-88HDxl Manual de usuario

Kramer

Kramer VS-162V Manual de usuario

Kramer

Kramer Sierra Video 1616V5S Manual de usuario

Kramer

Kramer VP-8x8 Manual de usuario

Kramer

Kramer VS-88HDCPxl Manual de usuario

Kramer

Kramer VS-84H Manual de usuario

Kramer

Kramer Sierra Video 3248V5Sxl Manual de usuario

Kramer

Kramer Sierra Video 6432V5Sxl Manual de usuario

Kramer

Kramer VS-81HD Manual de usuario

Kramer

Kramer VS-1202YC Manual de usuario

Kramer

Kramer VS-88HN Manual de usuario

Kramer

Kramer VP-27 Manual de usuario

Kramer

Kramer VS-62DT Manual de usuario

Kramer

Kramer VS-88HDxl Manual de usuario

Kramer

Kramer VS-88HD Manual de usuario

Kramer

Kramer VS-606xl Manual de usuario

Kramer

Kramer Sierra Video 3216V3S Manual de usuario

Kramer

Kramer VS-3232A Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Roland

Roland XS-1HD Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario

Extron electronics

Extron electronics MTPX Plus Series Manual de usuario

Key Digital

Key Digital Champion KD-16x16CS Manual de usuario

Shinybow USA

Shinybow USA SB-8811 Manual de usuario

Optimus

Optimus Compact Manual de usuario