Kramer MV-4X Manual de usuario

MV-4X Quick Start

P/N:

2900- 301494QS

Rev:

Scan for full manual

MV-4X Quick Start Guide

This guide helps you install and use your MV-4X for the first time.

Go to www.kramerav.com/downloads/MV-4X to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

MV-4X 4 Window Multi-viewer/4x2 Seamless Matrix Switcher

1 Power adapter and cord

1 Quick start guide

4 Rubber feet

Step 2: Get to know your MV-4X

Feature

Function

INPUT Selector Buttons (1 to 4)

Press to select an HDMI input (from 1 to 4) to switch to an output.

OUTPUT (in

Matrix Mode)

Selector Button

Press to select an output.

LEDs (A and B)

Light green when output A or B are selected.

WINDOW (in

Multiview Mode)

Selector Button

Press followed by an input button to connect the selected input to a window.

For example, select Window 3 and then Input button # 2 to connect input # 2 to

Window 3.

LEDs (1 to 4)

Light green when a window is selected.

MATRIX Button

Press to operate the system as a 4x2 matrix switcher.

QUAD Button

Press to display all four inputs on each of the outputs. Layouts are configured

via the embedded web pages.

PIP Button

Press to display one input in the background and the other images as PiP

(Picture-in-Picture) over that image. Layouts are configured via the embedded

web pages.

MENU Button

Press to access the OSD menu, exit the OSD menu and, when in the OSD

menu, move to the previous level in the OSD screen

Navigation

Buttons



Press to decrease numerical values or select from several definitions.



Press to move up the menu list values.



Press to increase numerical values or select from several definitions.



Press to move down the menu list.

Enter

Press to accept changes and change the SETUP parameters.

RESET TO XGA/1080P Button

Press and hold for about 2 seconds to toggle the output resolution between

XGA and 1080p, alternatively.

PANEL LOCK Button

To lock, press and hold PANEL LOCK button for about 3 seconds.

To unlock, press and hold PANEL LOCK and RESET TO buttons for about 3

seconds.

Feature

Function

HDMI IN Connectors (1 to 4)

Connect to up to 4 HDMI sources.

AUDIO OUT 5-pin Terminal Block

Connector

Connect to a balanced stereo audio acceptor.

HDBT

IR IN RCA Connector

Connect to an IR sensor to control a device connected to the HDBT receiver

via IR Tunneling.

IR OUT RCA Connector

Connect to an IR emitter to control a device that is connected to MV-4X from

the HDBT receiver side via HDBT tunneling.

HDBT RS-232 3-pin Terminal Block

Connector

Connect to a device for RS-232 HDBT tunneling.

RS-232 3-pin Terminal Block Connector

Connect to a PC to control the MV-4X.

HDMI OUT A Connector

Connect to an HDMI acceptor.

HDBT OUT B RJ-45 Connector

Connect to a receiver (for example, TP-580Rxr).

PROG USB Connector

Connect to a USB stick to perform firmware upgrades and/or upload a Logo.

ETHERNET RJ-45 Connector

Connect to a PC via a LAN

12V/2A DC Connector

Connect to the supplied power adapter.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Step 3: Mount MV-4X

Install MV-4X using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/MV-4X).

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

•Maximum mounting height for the device is 2 meters.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your MV-4X.

Connecting the audio output

To a balanced

stereo audio

acceptor:

To an unbalanced

stereo audio acceptor:

Wiring the RJ-45 Connectors

This section defines the TP pinout, using a straight pin-to-

pin cable with RJ-45 connectors.

EIA /TIA 568B

Wire Color

Orange / White

Orange

Green / White

For HDBT cables, it is recommended that the cable

ground shielding be connected/soldered to the

connector shield.

Blue

Blue / White

Green

Brown / White

Brown

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/MV-4X.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to MV-4X and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 6: Operate MV-4X

Operate Product via:

•Front panel buttons.

•Remotely, by RS-232 serial

commands transmitted by a

touch screen system, PC, or

other serial controller.

•Embedded web pages via the

Ethernet.

RS-232 Control / Protocol 3000

Baud Rate:

115,200

Parity:

None

Data Bits:

Command Format:

ASCII

Stop Bits:

Example: (Mute audio on output A): #MUTEA,1<CR>

Default Ethernet Parameters

IP Address:

192.168.1.39

UDP Port #:

50000

Subnet Mask:

255.255.0.0

TCP Port #:

5000

Gateway:

192.168.0.1

Default Username:

Admin

Default Password:

Admin

Otros manuales para MV-4X

Otros manuales de Conmutador de matriz de Kramer

Kramer

Kramer VS-88HDCPxl Manual de usuario

Kramer

Kramer VP-4x4K Manual de usuario

Kramer

Kramer VS-84H Manual de usuario

Kramer

Kramer VS-6464DN-EM Manual de usuario

Kramer

Kramer 84V5 Manual de usuario

Kramer

Kramer VS-44H Manual de usuario

Kramer

Kramer VSM-4x4A Manual de usuario

Kramer

Kramer VS-88UT Manual de usuario

Kramer

Kramer Sierra Pro XL 1208V3 Manual de usuario

Kramer

Kramer Sierra Video 4848V5SXL Manual de usuario

Kramer

Kramer Cobra MX-88 Manual de usuario

Kramer

Kramer VS-88HDCPxl Manual de usuario

Kramer

Kramer VS-81HD Manual de usuario

Kramer

Kramer VS-1604 Manual de usuario

Kramer

Kramer VS-66H3 Manual de usuario

Kramer

Kramer VS-3232A Manual de usuario

Kramer

Kramer VP-88ETH Manual de usuario

Kramer

Kramer Sierra Video 1608V3 Manual de usuario

Kramer

Kramer VS-48HDCPxl Manual de usuario

Kramer

Kramer AFM-20DSP-AEC Manual de usuario

Kramer

Kramer VS-88H Manual de usuario

Kramer

Kramer VS-48HDxl Manual de usuario

Kramer

Kramer VS-3232DN Manual de usuario

Kramer

Kramer MV-4X Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Roland

Roland XS-1HD Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario

Extron electronics

Extron electronics MTPX Plus Series Manual de usuario

Key Digital

Key Digital Champion KD-16x16CS Manual de usuario

Shinybow USA

Shinybow USA SB-8811 Manual de usuario

Optimus

Optimus Compact Manual de usuario