Kontron EPCI-201 Manual de usuario

P/N : M8004_INST Page 1 of 1 V 1.0 November 2004

READ ME FIRST

UNPACKING AND SAFETY PRECAUTIONS

Static Electricity

Since static electricity can cause damage to electronic devices, the following precautions should be

taken:

1. Keep the board in its anti-static package, until you are ready to install it.

2. Always touch a grounded surface or wear a grounding wrist strap before removing the board

from its package; this will discharge any static electricity that may have built up in your body.

3. Handle the board by the edges.

Storage Environment

Electronic boards are sensitive devices. Do not handle or store devices near strong electrostatic,

electromagnetic, magnetic or radioactive fields.

Power Supply

Before any installation or setup, ensure that the board is unplugged from power sources or

subsystems.

Unpacking

Follow these recommendations while unpacking:

1. After opening the box, save it as well as the packing material for possible future shipment.

2. Remove the board from its anti-static wrapping and place it on a grounded surface.

3. Inspect the board for damage. If there is any damage or missing items, notify Kontron

immediately.

When unpacking you will find:

1. One ePCI-201 SBC.

2. One CD-ROM containing drivers *

3. One heat sink.

4. One Quick Reference sheet.

5. Cables listed on the order.

6. One mezzanine with two USB connectors, one RCA connector and one video (DB15) connector.

Note:

For latest Technical Reference Manual, Quick Reference Sheet, drivers, BIOS and other

documentation, please consult our web site at: http://www.kontron.com or our FTP site at:

ftp://ftp.kontron.ca/Support

* Note that the Ethernet driver for the 82541ER available on the CD 4.1 is not working

properly. To download the new version, please visit www.kontron.com or

ftp.kontron.ca/support/

P/N : M8004_INST Page 2 of 2 V 1.0 November 2004

CPU and Heatsink Installation

Raise the Socket Actuation Lever up to 90º.

Locate the Pin 1 Notch.

Locate the Pin 1 Notch on the CPU.

Install the CPU onto Socket (match the pin 1 of CPU

with Pin 1 of Socket.

Lower the Socket Actuation Lever.

Remove the protective cover under the heatsink.

Install the CPU Heatsink onto the CPU and clip it to

the retention module.

Activate simultaneously the clips levers in order to

secure the heat sink.

Caution : You must apply pressure equally on both

side of the heatsink when you fasten the side

brackets.

Connect the CPU Fan cable to the CPU fan

connector (J21) located near the Memory Sockets.

IMPORTANT

1. Once the CPU is installed you must handle the board carefully and hold it on the

heatsink side.

2. The CPU Power cable must be installed on connector J22.

If not installed, the board will not start. This 4 wires cable comes from P4 ready power

supply or from the Backplane.

mPGA478B

Pin 1

Notch

Pin 1 Notch

mPGA478B

Tabla de contenidos

Otros manuales de Hardware de computadora de Kontron

Kontron

Kontron MSP8040 Series Manual de usuario

Kontron

Kontron CP6003-RA/RC Manual de usuario

Kontron

Kontron COMh-caRP Manual de usuario

Kontron

Kontron BL Pi-Tron CM3+ Manual de usuario

Kontron

Kontron Kiss 2U Manual de usuario

Kontron

Kontron MSP8020 Series Manual de usuario

Kontron

Kontron AT8060 Manual de usuario

Kontron

Kontron AdvancedTCA AT8901M Manual de usuario

Kontron

Kontron ETX -CN8 Manual de usuario

Kontron

Kontron CP6007-SA Manual de usuario

Kontron

Kontron MSM-LP Manual de usuario

Kontron

Kontron aFLAT Series Manual de usuario

Kontron

Kontron COMe-bID7 Manual de usuario

Kontron

Kontron ThinkIO-P Manual de usuario

Kontron

Kontron Kiss-Stor 0/5 Manual de usuario

Kontron

Kontron nanoETXexpress-HMI Baseboard Manual de usuario

Kontron

Kontron MOPSlcdGX1 Manual de usuario

Kontron

Kontron coolMonster/PM Manual de usuario

Kontron

Kontron MSM200X Manual de usuario

Kontron

Kontron CP3002 Manual de usuario

Kontron

Kontron KTQ77/Flex Manual de usuario

Kontron

Kontron MPC-pONE Manual de usuario

Kontron

Kontron CP6003-SA Manual de usuario

Kontron

Kontron CP3003-SA Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario

Advantech

Advantech ASMB-935 Series Manual de usuario

Jupiter

Jupiter RAM PACK Manual de usuario

Kontron ePCI-201 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas