Kogan KATVBKSTNDA Manual de usuario

Otros manuales para KATVBKSTNDA

2

Tabla de contenidos

Otros manuales de Rack y soporte de Kogan

Kogan

Kogan FSDB24STNDB Manual de usuario

Kogan

Kogan KASMM39S24A Manual de usuario

Kogan

Kogan KATVCST65LM Manual de usuario

Kogan

Kogan KALTHDSTVSA Manual de usuario

Kogan

Kogan OSTIA Series Manual de usuario

Kogan

Kogan KASTTVPB55A Manual de usuario

Kogan

Kogan KAWLMFX75MA Manual de usuario

Kogan

Kogan KAWLM55CNRA Manual de usuario

Kogan

Kogan KAWLM90FIXT Manual de usuario

Kogan

Kogan ovela OVDELUXWCRA Manual de usuario

Kogan

Kogan KAWLMFM55MA Manual de usuario

Kogan

Kogan KAWLMSBMNTA Manual de usuario

Kogan

Kogan LCDP30 Manual de usuario

Kogan

Kogan KATVSTHLDCA Manual de usuario

Kogan

Kogan KAWLMDLSTND Manual de usuario

Kogan

Kogan KASLSTMTSTA Manual de usuario

Kogan

Kogan KAWLMFM90MA Manual de usuario

Kogan

Kogan KATVBKSTNDA Manual de usuario

Kogan

Kogan OSTIA Series Manual de usuario

Kogan

Kogan KAWLM70TLTA Manual de usuario

Kogan

Kogan KAWLM85TSMA Manual de usuario

Kogan

Kogan KASTDARIKLA Manual de usuario

Kogan

Kogan KAMMFS12DA Manual de usuario

Kogan

Kogan NB14T20DSBA Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario

SWIVEL TABLETOP STAND

WITH GLASS BASE

(FOR 32”-70” TVS)

KATVBKSTNDA

•Read all instructions before use, and retain this user guide for future reference.

•Ensure you have located all components before disposing of any packaging

materials.

•This unit is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities or lack of experience and knowledge, unless

they have been given supervision or instructions concerning use of the appliance by

a person responsible for their safety.

•This product contains small parts which could pose a choking hazard if swallowed.

Keep away from children.

•Maximum weight capacity for this stand is 40kg.

•Pay close attention to the weight limits, ensure all connections are secure and

ensure the screws, brackets and mounting points on any monitors are in good

condition.

•Safety gear and proper tools must be used. This product should only be installed by

professionals.

•This product is for indoor use only. Use outdoors may result in product failure,

product damage and/or personal injury.

•Note the following icon when lifting or moving this product:

Lifting with two people is recommended at all times.

SAFETY & WARNINGS

DIMENSIONS

Parts:

COMPONENTS

Hardware:

A1 x 4

A2 x 3

A3 x 3

A4 x 2

A5 x 3

A6 x 4

A7 x 2

A8 x 2

A9 x 2

A10 x 1

A11 x 1

A12 x 2

M-A (M5x14) x 4

M-B (M6x14) x 4

M-C (M6x30) x 4

M-D (M8x30) x 4

M-F (M8x50) x 4

M-F x 4

M-G x 8

M-H x 8

Note:

This assembly requires a Phillips head screwdriver (not supplied).

Step 1:

Add adhesive feet (A1) to the main base (B1).

Step 2:

Fit end piece (B5) to the stand (B2).

ASSEMBLY

Step 3:

Align the swivel base (A6) with the stand (B2) and fit with x2 A4 screws, using the Allen key

(A10) to tighten the screws.

Step 4:

Next, fit the main base (B1) to the swivel base (A6), using the x3 A2 and A3 washers and x3

A5 screws. Use the Allen key to tighten. Ensure to not overtighten the screws.

Step 5:

Use the Allen key (A10) to loosen the screws from the stand’s mounting fixture.

This will allow it to be set at your ideal TV height. Once determined, refit the

mounting fixture with the same screws.

Use the spanner (A11) to fit the A9 nuts, and a Phillips head screwdriver

(not supplied) to fit the A7 screws with A6 washers.

Step 6:

Using a Phillips head screwdriver, fit the support beam (B3) to the mounting

fixture with the A8 screws and A6 washers.

Step 7:

Use a Phillips head screwdriver to remove the locking screws from the x2

mounting rails (B4). Keep these screws nearby, as they will be required at a

later step.