Keysight E5063A Manual de usuario

Keysight E5063A

ENA Series Network Analyzer

100 kHz to 500 M/1.5 G/3 G/4.5 G/6.5 G/8.5 G/14 G/18 GHz

Configuration Guide

02 | Keysight | E5063A ENA Series Network Analyzer - Configuration Guide

Ordering Guide

The following steps will guide you through configuring your Keysight Technologies’ E5063A.

Standard furnished item

Description Additional information

Installation guide Contains the information necessary to start up with the E5063A.

CD ROM IO libraries

Power Cable

Calibration of Certification

Step 1. Choose frequency option (must choose one of the eight frequency options.)

Description Option no.

Network Analyzer 100 kHz to 500 MHz, S-parameter test set, 50 Ω system impedance E5063A-205

Network Analyzer 100 kHz to 1.5 GHz, S-parameter test set, 50 Ω system impedance E5063A-215

Network Analyzer 100 kHz to 3 GHz, S-parameter test set, 50 Ω system impedance E5063A-235

Network Analyzer 100 kHz to 4.5 GHz, S-parameter test set, 50 Ω system impedance E5063A-245

Network Analyzer 100 kHz to 6.5 GHz, S-parameter test set, 50 Ω system impedance E5063A-265

Network Analyzer 100 kHz to 8.5 GHz, S-parameter test set, 50 Ω system impedance E5063A-285

Network Analyzer 100 kHz to 14 GHz, S-parameter test set, 50 Ω system impedance E5063A-2D5

Network Analyzer 100 kHz to 18 GHz, S-parameter test set, 50 Ω system impedance E5063A-2H5

Step 2. Choose software option (If not required, go to step 4.)

Description Option no. Requires Not compatible Additional information

Time Domain/Test wizard E5063A-011 None None1This option is required for time domain analysis or PCB

measurements

Time Domain E5063A-010 None E5063A-011 Adds time domain transform and gating capabilities

Wireless power transfer

analysis

E5063A-006 None None This option is required for wireless power transfer efficiency test of

wireless power transfer modules

1. E5063A-011 is a superset of E5063A-010. E5063A-011 includes the capability of E5063A-010.

Step 3. Choose hardware option

Description Option no. Requires Not compatible Additional information

Add GPIB interface E5063A-721 None E5063A-722 Must choose either Option 721 or 722

Without GPIB interface E5063A-722 None E5063A-721 Must choose either Option 721 or 722

Add handler I/O interface E5063A-731 None E5063A-732 Must choose either Option 731 or 732

Without handler I/O interface E5063A-732 None E5063A-731 Must choose either Option 731 or 732

Step 4. Choose storage drive option (mandatory option)

Description Option no. Requires Not compatible Additional information

Standard storage drive E5063A-019 None None Option 019 is the only storage drive option for the E5063A.

Must choose this option

03 | Keysight | E5063A ENA Series Network Analyzer - Configuration Guide

Step 6. Add calibration certificate (If not required, go to step 7.)

Description Option no. Additional information

ISO 17025 Compliant Calibration E5063A-1A7 ISO 17025 compliant calibration

ANSI Z540 compliant calibration E5063A-A6J ANSI Z540 compliant calibration

Step 5. Add accessory option (If not required, go to step 6.)

Description Option no. Requires Not compatible Additional information

Keyboard E5063A-810 None None USB Keyboard for simplifying word inputs.

Mouse E5063A-820 None None USB Mouse for simplifying measurement operation.

Rackmount Kit E5063A-1CM None None Not installable simultaneously with E5063A -1CP.

Front Handle Kit E5063A-1CN None None Not installable simultaneously with E5063A -1CP.

Handle/Rack Mount Kit E5063A-1CP None None Not installable simultaneously with E5063A -1CM or 1CN.

Step 8. Add related products

Description Option no. Requires Not compatible Additional information

USB Coaxial Switch,

DC to 18 GHz, SPDT

U1810B None None The number of test ports can be expanded up to four by connecting this SPDT

switch to the E5063A’s port-1 and 2.

–For connecting both single-ended and differential probes simultaneously

in the PCB measurements with the option E5063A-011.

–For testing multiple DUTs with one E5063A.

USB Coaxial Switch,

DC to 8 GHz Dual SP6T

U1816A None None The number of test ports can be expanded up to 12 by connecting this SP6T

switch to the E5063A’s ports, which can provides a lower cost solution for

multi-DUT (antenna) measurements

USB Coaxial Switch,

DC to 26.5 GHz Dual SP6T

U1816C None None The number of test ports can be expanded up to 12 by connecting this SP6T

switch to the E5063A’s ports, which can provides a lower cost solution for

multi-DUT (antenna) measurements

1. The U1810B’s switching can be controlled with the graphical user interface of the option 011 Test Wizard, or with the E5063A’s SCPI command.

(This command can be used even without the Option 011.)

Step 7. Choose warranty plan

3 year return-to-keysight warranty and service is standard. The extended warranty option is available. Contact your local Keysight

office or visit our web site for more information.

04 | Keysight | E5063A ENA Series Network Analyzer - Configuration Guide

Frequency Upgrades

Upgrade kit option no. Description From To Customer installable

E5063AU-210 Upgrade from 500 MHz to 1.5 GHz E5063A-205 E5063A-215 No

E5063AU-230 Upgrade from 500 MHz to 3 GHz E5063A-205 E5063A-235 No

E5063AU-240 Upgrade from 500 MHz to 4.5 GHz E5063A-205 E5063A-245 No

E5063AU-260 Upgrade from 500 MHz to 6.5 GHz E5063A-205 E5063A-265 No

E5063AU-280 Upgrade from 500 MHz to 8.5 GHz E5063A-205 E5063A-285 No

E5063AU-2D0 Upgrade from 500 MHz to 14 GHz E5063A-205 E5063A-2D5 No

E5063AU-2H0 Upgrade from 500 MHz to 18 GHz E5063A-205 E5063A-2H5 No

E5063AU-231 Upgrade from 1.5 GHz to 3 GHz E5063A-215 E5063A-235 No

E5063AU-241 Upgrade from 1.5 GHz to 4.5 GHz E5063A-215 E5063A-245 No

E5063AU-261 Upgrade from 1.5 GHz to 6.5 GHz E5063A-215 E5063A-265 No

E5063AU-281 Upgrade from 1.5 GHz to 8.5 GHz E5063A-215 E5063A-285 No

E5063AU-2D1 Upgrade from 1.5 GHz to 14 GHz E5063A-215 E5063A-2D5 No

E5063AU-2H1 Upgrade from 1.5 GHz to 18 GHz E5063A-215 E5063A-2H5 No

E5063AU-243 Upgrade from 3 GHz to 4.5 GHz E5063A-235 E5063A-245 No

E5063AU-263 Upgrade from 3 GHz to 6.5 GHz E5063A-235 E5063A-265 No

E5063AU-283 Upgrade from 3 GHz to 8.5 GHz E5063A-235 E5063A-285 No

E5063AU-2D3 Upgrade from 3 GHz to 14 GHz E5063A-235 E5063A-2D5 No

E5063AU-2H3 Upgrade from 3 GHz to 18 GHz E5063A-235 E5063A-2H5 No

E5063AU-265 Upgrade from 4.5 GHz to 6.5 GHz E5063A-245 E5063A-265 No

E5063AU-285 Upgrade from 4.5 GHz to 8.5 GHz E5063A-245 E5063A-285 No

E5063AU-2D5 Upgrade from 4.5 GHz to 14 GHz E5063A-245 E5063A-2D5 No

E5063AU-2H5 Upgrade from 4.5 GHz to 18 GHz E5063A-245 E5063A-2H5 No

E5063AU-286 Upgrade from 6.5 GHz to 8.5 GHz E5063A-265 E5063A-285 No

E5063AU-2D6 Upgrade from 6.5 GHz to 14 GHz E5063A-265 E5063A-2D5 No

E5063AU-2H7 Upgrade from 6.5 GHz to 18 GHz E5063A-265 E5063A-2H5 No

E5063AU-2D8 Upgrade from 8.5 GHz to 14 GHz E5063A-285 E5063A-2D5 No

E5063AU-2H6 Upgrade from 8.5 GHz to 18 GHz E5063A-285 E5063A-2H5 No

E5063AU-2HD Upgrade from 14 GHz to 18 GHz E5063A-2D5 E5063A-2H5 No

Hardware Upgrades

Upgrade

model no.

Description Option no. Customer

installable

Requires (Instrument must

already include the following)

E5063AU-721 Add GPIB interface E5063A-721 No None

E5063AU-731 Add handler I/O interface E5063A-731 No None

Software Upgrades

Upgrade

model no.

Description Option no. Customer

installable

Requires (Instrument must

already include the following)

Additional information

E5063AU-011 Time Domain/Test wizard E5063A-011 Yes None This option is required for time domain

analysis or PCB measurements

E5063AU-010 Time Domain E5063A-010 Yes None Adds time domain transform and

gating capabilities

E5063AU-006 Wireless power transfer

analysis

E5063A-006 Yes None This option is required for wireless

power transfer efficiency test of

wireless power transfer modules

05 | Keysight | E5063A ENA Series Network Analyzer - Configuration Guide

Test Accessories and Calibration Kits

Test accessories and calibration kits that can be used with the E5063A are listed in this section. A complete line of test accessories

and calibration kits can be found at the following websites:

http://www.keysight.com/find/na_accessories

http://www.keysight.com/find/accessories

Test accessories

Test accessories such as test port cable are necessary for a complete measurement system using the E5063A. Order test accessories

in accordance with the desired measurement system.

Calibration kits

Calibration is an accuracy enhancement procedure that effectively reduces the system errors that cause uncertainty in network

measurement. Calibration kit is necessary to perform the calibration.

– Mechanical calibration kits include standards, such as opens, shorts and loads, which are measured by the network analyzer.

Choose a calibration kit for each connector type to be used.

– Electronic calibration (ECal) modules replace mechanical calibration standards with one solid-state calibration module that is

controlled by the network analyzer via USB. ECal modules provide many different impedances to the test ports which enables a

full two-port calibration to be performed quickly with a single connection. This technique reduces operator errors and connector

wear and abrasion.

Category Product Number Description

Cables N6314A 50 Ω type-N (m) to type-N (m) cable, DC to 12.4 GHz, 61 cm (24 in)

N6315A 50 Ω type-N (m) to type-N (f) cable, DC to 12.4 GHz, 61 cm (24 in)

11500E 3.5 mm (m) to 3.5 mm (m) cable, 61 cm (24 in)

11500F 3.5 mm (m) to 3.5 mm (m) cable, 152 cm (60 in)

Adapters 11853A 50 Ω Type-N accessory kit

11878A Type-N to 3.5 mm adapter kit

Category Product Number Description

Mechanical calibration kits 85032F Standard Mechanical Calibration Kit, DC to 9 GHz, Type-N, 50 Ω

85054D Economy Mechanical Calibration Kit, DC to 18 GHz, Type-N, 50 Ω

Electronic calibration kits 85092C RF ECal: 300 kHz to 9 GHz, 2 ports, Type-N, 50 Ω

N4431B Microwave ECal: 9 kHz to 13.5 GHz, 4 ports

N4432A Microwave ECal: 300 kHz to 18 GHz, 4 ports

N4690C Microwave ECal: 300 kHz to 18 GHz, 2 ports, Type-N, 50 Ω

Literature Resource

Web Resource

Get the latest news, product and support information, application literature and more.

http://www.keysight.com/find/e5063a

Description Publication number

E5063A Network Analyzer Data Sheet 5991-3615EN

E5063A Network Analyzer Brochure 5991-3614EN

E5063A PCB Analyzer Technical Overview 5991-3617EN

Network Analyzers Selection Guide 5989-7603EN

More literature is available on our web site.

06 | Keysight | E5063A ENA Series Network Analyzer - Configuration Guide

For more information on Keysight

Technologies’ products, applications or

services, please contact your local Keysight

office. The complete list is available at:

www.keysight.com/find/contactus

Americas

Canada (877) 894 4414

Brazil 55 11 3351 7010

Mexico 001 800 254 2440

United States (800) 829 4444

Asia Pacific

Australia 1 800 629 485

China 800 810 0189

Hong Kong 800 938 693

India 1 800 11 2626

Japan 0120 (421) 345

Korea 080 769 0800

Malaysia 1 800 888 848

Singapore 1 800 375 8100

Taiwan 0800 047 866

Other AP Countries (65) 6375 8100

Europe & Middle East

Austria 0800 001122

Belgium 0800 58580

Finland 0800 523252

France 0805 980333

Germany 0800 6270999

Ireland 1800 832700

Israel 1 809 343051

Italy 800 599100

Luxembourg +32 800 58580

Netherlands 0800 0233200

Russia 8800 5009286

Spain 800 000154

Sweden 0200 882255

Switzerland 0800 805353

Opt. 1 (DE)

Opt. 2 (FR)

Opt. 3 (IT)

United Kingdom 0800 0260637

For other unlisted countries:

www.keysight.com/find/contactus

(BP-11-29-16)

DEKRA Certified

ISO9001 Quality Management System

www.keysight.com/go/quality

Keysight Technologies, Inc.

DEKRA Certified ISO 9001:2015

Quality Management System

This information is subject to change without notice.

Published in USA, January 18, 2017

5991-3616EN

www.keysight.com

www.keysight.com/find/e5063a

Evolving

Our unique combination of hardware, software, support, and people can help you reach

your next breakthrough. We are unlocking the future of technology.

From Hewlett-Packard to Agilent to Keysight

myKeysight

www.keysight.com/find/mykeysight

A personalized view into the information most relevant to you.

Keysight Services

www.keysight.com/find/service

Our deep offering in design, test, and measurement services deploys an

industry-leading array of people, processes, and tools. The result? We help

you implement new technologies and engineer improved processes that

lower costs.

Three-Year Warranty

www.keysight.com/find/ThreeYearWarranty

Keysight’s committed to superior product quality and lower total cost

of ownership. Keysight is the only test and measurement company with

three-year warranty standard on all instruments, worldwide. And, we provide

a one-year warranty on many accessories, calibration devices, systems and

custom products.

Keysight Assurance Plans

www.keysight.com/find/AssurancePlans

Up to ten years of protection and no budgetary surprises to ensure your

instruments are operating to specification, so you can rely on accurate

measurements.

Keysight Channel Partners

www.keysight.com/find/channelpartners

Get the best of both worlds: Keysight’s measurement expertise and product

breadth, combined with channel partner convenience.

Otros manuales para E5063A

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight

Keysight

Keysight U8903B Manual de usuario

Keysight

Keysight M1970 Series Manual de usuario

Keysight

Keysight FieldFox Manual de usuario

Keysight

Keysight PNA-X N5241A Manual de usuario

Keysight

Keysight 16192A Manual de operación

Keysight

Keysight U1401B Manual

Keysight

Keysight U1191A Manual de usuario

Keysight

Keysight u1701b Manual

Keysight

Keysight x series Manual de usuario

Keysight

Keysight PD1500A Guía del usuario

Keysight

Keysight x series Manual del propietario

Keysight

Keysight M9005A Manual de usuario

Keysight

Keysight 478A Manual de servicio

Keysight

Keysight NFA Series Manual del propietario

Keysight

Keysight M9203A Guía del usuario

Keysight

Keysight N9000A Manual de usuario

Keysight

Keysight N5222-60118 Manual de instalación y operación

Keysight

Keysight N7744A Manual de usuario

Keysight

Keysight N5224AU-217 Manual de instalación y operación

Keysight

Keysight M9614A Guía del usuario

Keysight

Keysight N9030B Manual de instalación y operación

Keysight

Keysight N1914A Manual de usuario

Keysight

Keysight E5080A Manual de usuario

Keysight

Keysight 1146B Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

ADTEK

ADTEK MW-5 Manual de usuario

Acterna

Acterna MS1400 Manual de usuario