Keysight Y1276A Guía de inicio rápido
Y1276A Advanced Cooling Spacer Kit
For M9484C and
Related Chassis
INSTALLATION NOTE
This installation note contains procedures for installing the Y1276A Cooling
Spacer Kit for the Keysight M9484C and related chassis in a Keysight rack.
The parts included with the Y1276A are listed in the following tables (note that
not all parts listed are available as field-replaceable parts).
Y1276A Advanced Cooling Spacer Kit for M9484C and related chassis
These kits are designed for Keysight racks. A non-Keysight rack may
require the use of support rails.
Part Number Description Quantity
M9044-80201 Cooling Spacer Kit, Extended 1 (See Figure 2)
M9044-80204 PSU Air Vent Channel Kit 1 (See Figure 5)
M9044-04105 Air Blocker, Spacer 1
0515-1946 M3 x 0.5 x 6mm Flat Head T10 Torx Screws w/Patch Lock
(for Spacer Air Blocker)
2
0515-0372 M3 x 0.5 x 8mm Pan Head T10 Torx Screws W/Washer
(for Cooling Spacer)
4
0515-0430 M3x 0.5 x 6mm Pan Head T10 Torx Screws W/Washer
M3X0.5 6mm-LG SST-300 Passivated (5x on PSU Air Channel)
5
2 Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note
Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note Procedure
General Rack Mounting Guidelines
In rack mounting the chassis, follow these guidelines:
-Always begin installing the chassis and heavy instruments at the bottom of
the rack and work up. This maintains a lower center of gravity and reduces the
possibility of the rack tipping.
-Anti-tipping feet, if available with the rack, should always be extended.
-The heaviest instrument or chassis should always be mounted at the bottom
of the rack.
-For maximum cooling and optimum rack thermal efficiency, place the
instrument or chassis with the greatest power consumption towards the top of
the rack. This promotes efficient cooling since heat rises when placed nearer
to the top of the rack, high power instruments will not unnecessarily heat
other instruments. However, in doing this, do not violate the guideline that
the heaviest instruments should be placed at the bottom of the rack.
-If instruments or modules in the chassis are consuming maximum power, 1U
of rack space is required for ventilation above the Keysight PXIe chassis.
Procedure
Tools Required: #1 and #2 Phillips screwdriver, Torx T10 Screwdriver
1Refer to Figure 1 on page 3. Remove four (4) M3 screws from the chassis top
cover and Chassis Fan Tray of the chassis.
To prevent injury during rack mounting, the chassis should
be empty and two people should lift it into the rack.
Do not stand the chassis on its side; the side handles may cause
the chassis to tip over.
Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note 3
Procedure Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note
2Place Cooling Spacer (M9044-80201) on top of the Chassis. See Figure 2.
3Align Cooling Spacer bottom to the four screw holes which has been removed
in Figure 1 on page 3.
4Secure Cooling Spacer bottom with four (4) M3 x 8mm Pan Head Torx T10
screws (0515-0372). See Figure 2.
Figure 1 Removing the screws
Figure 2 Secure spacer on the chassis by using Pan Head screws
.
Remove two M3 screws
from chassis top cover
Remove two M3 screws
from chassis fan tray
.
Cooling spacer
M9044-80201
Secure spacer by using four
M3 x 8mm Pan Head Torx T10 Screw
0515-0372
Do not place instrument more than 60 kg on top of cooling
spacer.
4 Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note
Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note Procedure
5Make sure the Cooling Spacer orientation is as per below illustration. See
Figure 3.
6Slot in the Spacer Air Blocker (M9044-04105) into Cooling Spacer and rotate
90º into upright orientation. See Figure 3.
7Attach the Air Blocker against the air vents at the front of Cooling Spacer.
8Secure the Air Blocker with two (2) M3 x 6mm Torx T10 screws (0515-1946).
See Figure 4.
Figure 3 Cooling Spacer orientation. Please see
Figure 4 Secure spacer on the chassis with M3 x 6mm screws
.
Spacer Air Blocker
M9044-04105
.
M3 x 6mm Flat
Head Torx T10
Screw
0515-1946
Do not install Spacer Air Blocker if higher air flow performance is
needed.
below.
Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note 5
Procedure Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note
9Remove PSU Air Channel top cover by unfastening five of the thumb screws.
See Figure 5.
10 Attach PSU Air Channel latches on the rack rail. See Figure 6.
PSU Air Channel Installation require Y1257A/Y1258A Rack Mount
Kit.
Figure 5 Removing PSU Air Channel top cover
Figure 6 Placing PSU Air Channel latches on rack rail
.
.
Latches
6 Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note
Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note Procedure
11 Secure PSU Air Channel bottom cover to chassis with five (5) M3 x 6mm Pan
Head Torx T10 screws (0515-0430). See Figure 7.
12 Close PSU Air Channel top cover and tighten the five (5) thumb screws. See
Figure 8.
Figure 7 Secure PSU Air Channel bottom cover
Figure 8 Tighten thumb screws
.
M3 x 6mm Pan Head Torx T10 Screw
0515-0430
.
Tighten five
thumb screws
Close PSU Air
Channel top cover
This information is subject to change without notice.
© Keysight Technologies 2022-2023
Second Edition April 2023
*Y1276-90001*
Y1276-90001
www.keysight.com
Tabla de contenidos
Otros manuales de Instrumento de medición de Keysight
Keysight
Keysight CX3322A Guía del usuario
Keysight
Keysight U1461A Manual de usuario
Keysight
Keysight B2980 Series Instrucciones de funcionamiento
Keysight
Keysight FieldFox Manual de usuario
Keysight
Keysight N9923A Manual de usuario
Keysight
Keysight AE6941A Manual de usuario
Keysight
Keysight U1401B Manual
Keysight
Keysight N4372E Manual de usuario
Keysight
Keysight N9021B MXA Guía de inicio rápido
Keysight
Keysight N9030B Manual de instalación y operación
Keysight
Keysight N8262A Manual de usuario
Keysight
Keysight E4990A Manual de usuario
Keysight
Keysight N1914A Manual de usuario
Keysight
Keysight M9290A Manual de usuario
Keysight
Keysight N2800A Manual de usuario
Keysight
Keysight N777 C Series Instrucciones de funcionamiento
Keysight
Keysight N1021B Manual de usuario
Keysight
Keysight 478A Manual de servicio
Keysight
Keysight U1242C Manual de usuario
Keysight
Keysight Truevolt Series Manual de servicio
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
ADTEK
ADTEK MW-5 Manual de usuario
Acterna
Acterna MS1400 Manual de usuario