Keysight Technologies E5405A-Pro Series Manual de usuario

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

Keysight Technologies

E5400-Pro Series Soft

Touch Connectorless

Probes

User’s Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from

Keysight Technologies as governed by

United States and international copyright

laws.

Manual Part Number

E5404-97006, November 2014

Printed in Malaysia

Published By:

Keysight Technologies

Plot No. CP-11, Sector- 8,

IMT Manesar, Gurgaon - 122051, India

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT SHALL

NOT BE LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE OF

THIS DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE

WRITTEN AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE

TERMS, THE WARRANTY TERMS IN THE

SEPARATE AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and

licensed as "Commercial computer soft-

ware" as defined in DFAR 252.227-7014

(June 1995), or as a "commercial item" as

defined in FAR 2.101(a) or as "Restricted

computer software" as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Keysight Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S. Gov-

ernment will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Gov-

ernment users will receive no greater than

Limited Rights as defined in FAR 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard.

It calls attention to an operating pro-

cedure, practice, or the like that, if

not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

WARNING

A WARNING notice denotes a hazard.

It calls attention to an operating pro-

cedure, practice, or the like that, if

not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

2Keysight E5400-Pro Series Soft Touch User’s Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Keysight E5400-Pro Series Soft Touch User’s Guide 3

Contents

1 Overview, Installation, and Selection of Probing Options

The E5400-Pro Series Soft Touch Probes — at a Glance 8

Installation Instructions 10

Selection of Probing Options 12

Retention Modules 13

The E5402A-Pro Series Low-profile Right-angle 34-channel

Single-ended Soft Touch Probe (for analyzers with 90-pin

cable connectors) 14

The E5404A-Pro Series 34-channel Single-ended Soft Touch

Probe

(for analyzers with 40-pin cable connectors) 15

The E5405A-Pro Series 17-channel Differential Soft Touch

Probe

(for analyzers with 90-pin cable connectors) 16

The E5406A-Pro Series 34-channel Single-ended Soft Touch

Probe

(for analyzers with 90-pin cable connectors) 17

The E5386A Half-channel Adapter (for use with the 16760A

logic analyzer) 18

2 Mechanical Considerations

Characteristics 20

Probe Dimensions 21

Board Layout Dimensions 25

Retention Module Dimensions 25

Footprint Dimensions 28

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

4Keysight E5400-Pro Series Soft Touch User’s Guide

Contents

Pin Outs for the Probes 29

Probing with E5404A-Pro Series Probe 30

Probing with the E5405A-Pro Series Probe 33

Probing with the E5402A/E5406A-Pro Series Probe 36

E5386A Half-channel Adapter Dimensions 39

Pin out for the E5386A half-channel adapter when connected

to E5405A 40

Pin out for two E5386A half-channel adapters connected to one

E5402A or E5406A 42

3 Operating the E5404A-Pro Series Probes

Equivalent Probe Loads 46

Time Domain Transmission (TDT) 48

4 Operating the E5402A, E5405A, and E5406A-Pro Series Probes

Equivalent Probe Loads 52

Time Domain Transmission (TDT) 54

Step Inputs 57

Eye Opening 60

5 Circuit Board Design

Transmission Line Considerations 64

Recommended Routing 65

Data and Clock Inputs per Operating Mode 67

Thresholds 70

E5404A-pro series single-ended soft touch probes 70

E5405A-pro series differential soft touch probe 70

E5402A and E5406A-pro series single-ended soft touch probes 70

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Keysight E5400-Pro Series Soft Touch User’s Guide 5

Contents

Signal Access 71

Labels split across probes 71

Reordered bits 71

Half-channel 1.25 and 1.5 Gb/s modes (16760A only) 71

6 Recommended Reading

For More Information 74

MECL System Design Handbook 74

High-speed Digital Design 74

Designing High-speed Target Systems for Logic Analyzer Probing 74

Safety Notices 75

Warnings 75

To clean the instrument 76

Safety Symbols 76

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

6Keysight E5400-Pro Series Soft Touch User’s Guide

Contents

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Keysight E5400-Pro Series Soft Touch Connectorless Probes

User’s Guide

1Overview,

Installation, and

Selection of Probing

Options

The E5400-Pro Series Soft Touch Probes — at a Glance / 8

Installation Instructions / 10

Selection of Probing Options / 12

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

8Keysight E5400-Pro Series Soft Touch User’s Guide

1 Overview, Installation, and Selection of Probing Options

The E5400-Pro Series Soft Touch Probes — at a Glance

The new Keysight E5400-pro series soft touch probes are ultra-low-load

connector-less probes that work with the Keysight logic analysis modules.

The probes attach to the PC board using a retention module which ensures

pin-to-pad alignment and holds the probe in place.

• The E5402A-pro series probe is a low-profile right-angle 34-channel

single-ended connector-less soft touch probe (for analyzers with

90-pin cable connectors).

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Keysight E5400-Pro Series Soft Touch User’s Guide 9

Overview, Installation, and Selection of Probing Options 1

• The E5404A-pro series probe is a 34-channel single-ended

connector-less soft touch probe (for analyzers with 40-pin cable

connectors).

• The E5405A-pro series probe is a 17-channel differential

connector-less soft touch probe (for analyzers with 90-pin cable

connectors).

• The E5406A-pro series probe is a 34-channel single-ended

connector-less soft touch probe (for analyzers with 90-pin cable

connectors).

Use the following information to design your target system board for use

with the Keysight soft touch probes.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Keysight Technologies

Keysight Technologies

Keysight Technologies InfiniiVision 3000 X Series Manual de usuario

Keysight Technologies

Keysight Technologies 11683AZ Option H01 Manual de servicio

Keysight Technologies

Keysight Technologies N2830A Series Manual de usuario

Keysight Technologies

Keysight Technologies N2840A Manual de usuario

Keysight Technologies

Keysight Technologies U3047AE04 Manual

Keysight Technologies

Keysight Technologies E6640A Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 4000 X Series Manual

Keysight Technologies

Keysight Technologies E6640A EXM Manual de instalación y operación

Keysight Technologies

Keysight Technologies N4891A Manual de usuario

Keysight Technologies

Keysight Technologies U1610/20A Manual de usuario

Keysight Technologies

Keysight Technologies E5092A Manual de usuario

Keysight Technologies

Keysight Technologies N7015A Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 3000G X Series Manual de usuario

Keysight Technologies

Keysight Technologies 16192A Manual de operación

Keysight Technologies

Keysight Technologies E7515A Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision DSOX1204A Manual

Keysight Technologies

Keysight Technologies 85058E Manual

Keysight Technologies

Keysight Technologies 11644A Series Manual

Keysight Technologies

Keysight Technologies N4917CPCA Manual de usuario

Keysight Technologies

Keysight Technologies M8000 Series Manual de usuario

Keysight Technologies

Keysight Technologies S8780A Manual de usuario

Keysight Technologies

Keysight Technologies U3020AS22 Manual

Keysight Technologies

Keysight Technologies 81960A Manual de usuario

Keysight Technologies

Keysight Technologies PNA-X N524xB Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario