Keysight Technologies I7090 Instrucciones de funcionamiento

Keysight i7090 Board Test

System

Site Preparation

Notices

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies as governed by

United States and international

Edition

Edition 1, January 2021

Published by:

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403-1738

United States

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS,"

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO THE

MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES, EITHER

EXPRESS OR IMPLIED WITH REGARD

TO THIS MANUAL AND ANY

INFORMATION CONTAINED HEREIN,

INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS

OR FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS DOCUMENT

OR ANY INFORMATION CONTAINED

HEREIN. SHOULD KEYSIGHT AND THE

USER HAVE A SEPARATE WRITTEN

AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN

THIS DOCUMENT THAT CONFLICT

WITH THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance with

the terms of such license.

U.S. Government Rights

The Software is "commercial computer

software," as defined by Federal

Acquisition Regulation ("FAR") 2.101.

Pursuant to FAR 12.212 and 27.405-3

and Department of Defense FAR

Supplement ("DFARS") 227.7202, the

U.S. government acquires commercial

computer software under the same

terms by which the software is

customarily provided to the public.

Accordingly, Keysight provides the

Software to U.S. government

customers under its standard

commercial license, which is embodied

in its End User License Agreement

(EULA), a copy of which can be found at

http://www.keysight.com/find/sweula.

The license set forth in the EULA

represents the exclusive authority by

which the U.S. government may use,

modify, distribute, or disclose the

Software. The EULA and the license set

forth therein, does not require or

permit, among other things, that

Keysight: (1) furnish technical

information related to commercial

computer software or commercial

computer software documentation that

is not customarily provided to the

public; or (2) relinquish to, or otherwise

provide, the government rights in

excess of these rights customarily

provided to the public to use, modify,

reproduce, release, perform, display, or

disclose commercial computer software

or commercial computer software

documentation. No additional

government requirements beyond

those set forth in the EULA shall apply,

except to the extent that those terms,

rights, or licenses are explicitly required

from all providers of commercial

computer software pursuant to the FAR

and the DFARS and are set forth

specifically in writing elsewhere in the

EULA. Keysight shall be under no

obligation to update, revise or

otherwise modify the Software.

Safety Notices

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions are

fully understood and met.

A CAUTION notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

Site Preparation 3

Site Preparation

Safety Notices 4

Equipment Rating 5

Site Preparation Process 6

Structural Requirements 9

Power Requirements 12

Compressed Air Requirements 19

SMEMA Communication 20

The Importance of Site Preparation

The Keysight i7090 board test system is a complex and sophisticated automatic test

equipment. To ensure that your site is properly equipped for your new system, and

to minimize the possibility of problems or delays in system installation, read and

follow the recommendations provided in this manual.

4Site Preparation

Safety Notices

Safety Symbols

The following symbols on the equipment and in the documentation indicate

precautions which must be taken to maintain safe operation of the equipment.

Use the equipment as specified

If the equipment is used in a manner not specified by the

manufacturer, the equipment protection may be

impaired.

The i7090 system is designed for indoor use and in an

area with low condensation.

Clean with slightly dampened cloth

Clean the outside of the equipment with a soft, lint-free,

slightly dampened cloth. Do not use detergent, volatile

liquids, or chemical solvents.

The equipment is designed for use in Overvoltage Category II

and Pollution Degree 2.

When you see this symbol on the equipment, you should refer to the

equipment’s instruction manual for important information.

This symbol indicates the protective earth (ground) terminal.

This symbol indicates that the equipment requires alternating current

(ac) input.

This symbol indicates the fuse.

Equipment Rating

Site Preparation 5

Equipment Rating

•Pollution degree 2

•Installation category II

•Altitude: Up to 2000 m

•Humidity: 50% to 80%

•Electrical supply: 208 Vac or 415 Vac, 50/60Hz, 16 A, 3 phase

•System Operating Temperature: 0°C to 40°C *

•Monitor Operating Temperature: 5°C to 35°C

•PC Controller Operating Temperature: 10°C to 40°C

•Mains supply voltage fluctuations are not to exceed 10% of the nominal supply

voltage

* System operating temperature specification exclude PC and monitor operating

temperature.

6Site Preparation

Site Preparation Process

Successful system preparation and installation requires planning and effort by both

you and Keysight. Following are summaries of each party’s responsibilities.

Keysight’s Responsibilities

As a part of the purchase of a Keysight board test system, Keysight will provide the

following:

•Initial Site Preparation Visit — To help you begin, a Keysight authorized

representative will visit your site to help you understand what you will need to

do to make the site ready for your system, and answer any questions you may

have. For this visit the Keysight representative will bill up to 2 hours to Keysight

Technologies.

•Electrical and Environmental Inspection (Site Verification Visit) — After primary

power has been installed at the site, a Keysight representative will:

•inspect the lines to verify that the electrical power is suitable for the system,

•inspect the site to verify that its environmental characteristics conform to

the site preparation specifications, and

•check the compressed air hookups.

The representative will also answer any questions you may have. For this visit

the Keysight representative will bill up to 2 hours to Keysight.

•Installation Visit — After primary power and compressed air have been

installed, and all components of the system have been moved to the site, a

Keysight representative will complete the system installation. The Keysight

representative will plug in the pre-installed power cord after testing the power.

Installation includes removing the system from the pallet, unpacking the

smaller boxes, connecting cabling, starting the system, customizing the system

software, and performing a complete system verification. The representative

will also answer any questions you may have. For this visit the Keysight

representative will bill up to 4 hours to Keysight.

•Warranty — The Keysight board test systems include a one-year warranty that

provides on-site hardware repair, software support and software updates.

•Insurance — The system is insured by Keysight until it is delivered to your

loading dock.

Site Preparation Process

Site Preparation 7

Customer’s Responsibilities

While you are primarily responsible for the following activities, you can ask the

Keysight representative for advice and information about services offered.

•Insurance — You must provide insurance coverage for your system from the

time it is delivered to your facility.

•Software support contract — You are responsible for initiating and renewing

support contracts for software, documentation updates, and telephone

support. Software support and updates are included during the warranty

period.

•Site preparation and maintenance — You must supply all labor and materials

used in site construction and maintenance. You are also responsible for

obtaining any building permits and licenses required by local laws and

regulations.

•Power, compressed air, and network installation — You are responsible for:

•Wiring primary power to the system. (The actual power connection to the

system will be made by the Keysight representative during the installation

visit.)

•Installing compressed air lines to the system.

•Installing external LAN cabling to the system. The i7090 system

communicates with other systems via IEEE 802.3 LAN.

•Proper use of the system — You are responsible for ensuring that use of the

system is consistent with local laws and regulations.

•Receiving the system

•You should remove the crate from the i7090 system, but not remove the

system from the pallet. See Moving Access Requirements for the space

requirements. (The Keysight representative will remove the i7090 system

from the pallet.)

•You may inventory the shipment using the enclosed packing list.

•You may leave the smaller boxes for the Keysight representative to unpack

when the system is installed.

•Inspection — You must inspect the system for physical damage. If you believe

that your system was damaged in shipment, call your Keysight representative.

•Moving — After the crate is removed, you should move the system from the

receiving dock to the installation site or to a safe storage area. See Moving

Access Requirements for the space requirements.

Click here for a Site Preparation checklist.

8Site Preparation

Site Preparation Process

The Site Preparation Process

The Keysight system site preparation process is as follows:

1Initial Site Preparation Visit

To help you begin, a Keysight authorized representative will visit your site to

help you understand what you will need to do to make the site ready for your

system, and answer any questions you may have.

2Site Planning

The site planning step is crucial and will save much effort at installation time.

Plan your system area and make a system plan drawing. Assign specialists to

perform the various tasks. Review the requirements in the following sections

and schedule all site preparation activities. If you need help, call your Keysight

representative.

3Site Plan Implementation

Implement the plan. Use the system plan drawing and work with your

specialists.

4Site Verification Visit

The Keysight representative will review your preparations and answer any

remaining questions. The representative will:

•inspect the lines to verify that the electrical power is suitable for the system,

•inspect the site to verify that its environmental characteristics conform to

the site preparation specifications, and

•check the compressed air hookups.

5Receiving the System

When the system arrives at your site:

•Remove the crate from the system, but do not remove the system from the

pallet.

•Inspect the system for damage.

•You may inventory the shipment using the enclosed packing list.

•You should move the system to the site where it will be installed, or a safe

storage area.

The Keysight representative will remove the i7090 system from the pallet. You

may leave the smaller boxes for the Keysight representative to unpack when the

system is installed.

Structural Requirements

Site Preparation 9

Structural Requirements

i7090 System Dimensions

Floor Space Requirements

Moving Access Requirements

i7090 System Dimensions

Figure 1 Dimensions

1543 mm (61 in)

631 mm (25 in)

433 mm (17 in)

545 mm (22 in)

1875 mm (74 in)

79 mm (3 in)

522 mm (21 in)

10 Site Preparation

Structural Requirements

Floor Space Requirements

The floor plan in Figure 2 incorporates areas needed around the i7090 system to

access panels and connection points for devices.

Figure 2 Recommended clearance

1543 mm (61 in)

i7090 System

Recommended clearance

1000 mm (40 in)

Recommended clearance

1500 mm (60 in)

Otros manuales para i7090

Tabla de contenidos

Otros manuales de Equipo de prueba de Keysight Technologies

Keysight Technologies

Keysight Technologies N5224AU-401 Manual de instalación y operación

Keysight Technologies

Keysight Technologies U9361C Manual de usuario

Keysight Technologies

Keysight Technologies 8960 Manual de usuario

Keysight Technologies

Keysight Technologies 85033E Guía de solución de problemas

Keysight Technologies

Keysight Technologies PD1500A Guía de inicio rápido

Keysight Technologies

Keysight Technologies 85038A 7-16 Manual

Keysight Technologies

Keysight Technologies N4877A Manual de usuario

Keysight Technologies

Keysight Technologies 85058V Manual

Keysight Technologies

Keysight Technologies 16192A Manual de operación

Keysight Technologies

Keysight Technologies InfiniiVision 2000 Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 3000T X Series Manual

Keysight Technologies

Keysight Technologies InfiniiVision 4000 X Series Manual

Keysight Technologies

Keysight Technologies N7700 Manual de usuario

Keysight Technologies

Keysight Technologies 1000A Series Manual de usuario

Keysight Technologies

Keysight Technologies U3020AD01 Manual

Keysight Technologies

Keysight Technologies N9330B Manual de usuario

Keysight Technologies

Keysight Technologies U3020AS22 Manual

Keysight Technologies

Keysight Technologies 85053B Manual

Keysight Technologies

Keysight Technologies N2830A Series Manual de usuario

Keysight Technologies

Keysight Technologies 16380C Guía de inicio rápido

Keysight Technologies

Keysight Technologies N7015A Manual de usuario

Keysight Technologies

Keysight Technologies N2840A Manual de usuario

Keysight Technologies

Keysight Technologies 16048G Manual de operación

Keysight Technologies

Keysight Technologies N5991 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario

Keysight Technologies i7090 Instrucciones de funcionamiento

Manuales populares de Equipo de prueba de otras marcas