Keysight Technologies 81960A Manual de usuario

Getting Started

Guide

Keysight 81960A Compact

Tunable Laser Source

Module

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from

Keysight Technologies as governed by

United States and international copyright

laws.

Manual Part Number

81960-90A01

Edition

Edition 4.0, July 2017

Printed in Malaysia

Keysight Technologies Deutschland GmbH

Herrenberger Strasse 130,

71034 Böblingen, Germany

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal Acquisition

Regulation (“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement

(“DFARS”) 227.7202, the U.S. government

acquires commercial computer software

under the same terms by which the soft-

ware is customarily provided to the public.

Accordingly, Keysight provides the Soft-

ware to U.S. government customers under

its standard commercial license, which is

embodied in its End User License Agree-

ment (EULA), a copy of which can be found

at http://www.keysight.com/find/sweula.

The license set forth in the EULA represents

the exclusive authority by which the U.S.

government may use, modify,distribute,or

disclose the Software. The EULA and the

license set forth therein, does not require

or permit, among other things, that Key-

sight: (1) Furnish technical information

related to commercial computer software

or commercial computer software docu-

mentation that is not customarily provided

to the public; or (2) Relinquish to, or other-

wise provide, the government rights in

excess of these rights customarily provided

to the public to use, modify, reproduce,

release, perform, display, or disclose com-

mercial computer software or commercial

computer software documentation. No

additional government requirements

beyond those set forth in the EULA shall

apply, except to the extent that those

terms, rights, or licenses are explicitly

required from all providers of commercial

computer software pursuant to the FAR and

the DFARS and are set forth specifically in

writing elsewhere in the EULA. Keysight

shall be under no obligation to update,

revise or otherwise modify the Software.

With respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS 227.7102,

the U.S. government acquires no greater

than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as appli-

cable in any technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT SHALL

NOT BE LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE OF

THIS DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE

WRITTEN AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE

TERMS, THE WARRANTY TERMS IN THE

SEPARATE AGREEMENT WILL CONTROL.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions

are fully understood and met.

2Keysight 81960A Compact TLS Module Getting Started Guide

Keysight 81960A Compact TLS Module Getting Started Guide 3

Contents

1 Getting Started

Safety Considerations 6

Safety Symbols 6

Initial Inspection 7

Line Power Requirements 7

Operating Environment 7

Storage and Shipment 7

Protecting Empty Module Slots 8

Fitting Blind Panels for Front-Loadable Module Slots 8

Fitting a Filler Module for Back-Loadable Module Slots 9

Initial Safety Information for Tunable Laser Modules 10

Laser Safety Labels 11

Laser class 1M label 11

Introduction 13

What is a Tunable Laser Source? 13

Installation 13

Front Panels 14

Front Panel Controls and Indicators 14

Typical Use Models 15

Optical Output 16

Polarization Maintaining Fiber 16

Angled and Straight Contact Connectors 16

Keysight 81960A

Compact Tunable Laser Source Module

Getting Stared Guide

1Getting Started

This chapter provides a general description of Keysight 81960A Tunable

Laser Source Family.

Safety Considerations / 6

Initial Safety Information for Tunable Laser Modules / 10

Laser Safety Labels / 11

Introduction / 13

Typical Use Models / 15

Optical Output / 16

6 Keysight 81960A Compact TLS Module Getting Started Guide

1 Getting Started

Safety Considerations

The following general safety precautions must be observed during all

phases of operation, service, and repair of this instrument. Failure to

comply with these precautions or with specific warnings elsewhere in this

manual violates safety standards of design, manufacture, and intended

use of the instrument. Keysight Technologies assumes no liability for the

customer’s failure to comply with these requirements.

Before operation, review the instrument and manual, including the red

safety page, for safety markings and instructions. You must follow these to

ensure safe operation and to maintain the instrument in safe condition.

Safety Symbols

The apparatus will be marked with this

symbol when it is necessary for the user

to refer to the instruction manual in

order to protect the apparatus against

damage.

Hazardous laser radiation.

Invisible laser radiation.

WARNING

The WARNING sign denotes a hazard. It calls attention to a procedure,

practice or the like, which, if not correctly performed or adhered to, could

result in injury or loss of life. Do not proceed beyond a WARNING sign

until the indicated conditions are fully understood and met.

Keysight 81960A Compact TLS Module Getting Started Guide 7

Getting Started 1

Initial Inspection

Inspect the shipping container for damage. If there is damage to the

container or cushioning, keep them until you have checked the contents of

the shipment for completeness and verified the instrument both

mechanically and electrically.

If the contents are incomplete, mechanical damage or defect is apparent,

notify the nearest Keysight Technologies Sales/Service Office.

Line Power Requirements

The Keysight 81960A Compact Tunable Laser Source modules operate

when installed in 8163A/B Lightwave Multimeters, 8164A/B Lightwave

Measurement Systems, and 8166A/B Lightwave Multichannel Systems.

Operating Environment

The safety information in your mainframe’s User’s Guide summarizes the

operating ranges for the Keysight 81960A Compact Tunable Laser Source

modules. In order for these modules to meet specifications, the operating

environment must be within the limits specified for your mainframe.

Storage and Shipment

A Keysight 81960A Compact Tunable Laser Source module can be stored

or shipped at temperatures between - 40°C and + 70°C.

Protect the module from temperature extremes that may cause

condensation within it.

WARNING

To avoid hazardous electrical shock, do not perform electrical tests when

there are signs of shipping damage to any portion of the outer enclosure

(covers, panels, etc.).

WARNING

You MUST return instruments with malfunctioning laser modules to a

Keysight Technologies Sales/Service Center for repair and calibration.

8 Keysight 81960A Compact TLS Module Getting Started Guide

1 Getting Started

Protecting Empty Module Slots

Fitting a Blind Panel or Filler Module helps to:

• prevent dust pollution and

• optimize cooling by guiding the air flow.

Fitting Blind Panels for Front-Loadable Module Slots

To fit the a blind panel (part number - 08163-40199), perform the

following procedure:

1 Position the blind panel as shown in Figure 1 on page -8. Position the

end closest to the handle against the bottom edge of the slot.

Figure 1 Fitting a Blind Panel

2 Push the top of the blind panel so that it clicks into position.

NOTE

To remove a blind panel, pull the handle.

Keysight 81960A Compact TLS Module Getting Started Guide 9

Getting Started 1

Fitting a Filler Module for Back-Loadable Module Slots

The Keysight 81960A Filler Module must be used if you have not installed a

back-loadable Tunable Laser module into the 8164A/B Lightwave

Measurement System.

The Keysight 81960A Filler Module can be fitted and removed in the same

way as any back-loadable module.

10 Keysight 81960A Compact TLS Module Getting Started Guide

1 Getting Started

Initial Safety Information for Tunable Laser Modules

The laser sources specified by this user guide are classified according to

IEC 60825-1.

The laser sources comply with 21 CFR 1040.10 except for deviations

pursuant to Laser Notice No. 50 dated 2007-June-24:

Table 1 Standard Laser Source Modules Laser Safety Information

Keysight 81960A

Laser type ECL-Laser

InGaAsP

Wavelength Range 1505 nm-1630 nm

Max. CW output power* 50 mW

Beam waist diameter 9 μm

Numerical aperture 0.1

Laser Class according to

IEC 60825-1 (2007)

Max. permissible CW output power 163 mW

* Max. CW output power is defined as the highest possible optical power that the laser source can

produce at its output connector.

** Max. permissible CW output power is the highest optical power that is permitted within the

appropriate laser class

Tabla de contenidos

Otros manuales de Equipo de prueba de Keysight Technologies

Keysight Technologies

Keysight Technologies PD1500A Guía de inicio rápido

Keysight Technologies

Keysight Technologies N2879A Manual de usuario

Keysight Technologies

Keysight Technologies E5405A-Pro Series Manual de usuario

Keysight Technologies

Keysight Technologies 85038A 7-16 Manual

Keysight Technologies

Keysight Technologies U3022AM42 Manual

Keysight Technologies

Keysight Technologies N9330B Manual de usuario

Keysight Technologies

Keysight Technologies U3050BH11 Manual

Keysight Technologies

Keysight Technologies U3047AM08 Manual

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X Series Manual de usuario

Keysight Technologies

Keysight Technologies Z Series Manual de usuario

Keysight Technologies

Keysight Technologies RF PA/FEM Guía del usuario

Keysight Technologies

Keysight Technologies InfiniiVision 3000G X Series Manual de usuario

Keysight Technologies

Keysight Technologies 85051B Manual

Keysight Technologies

Keysight Technologies ZA0060A Manual de usuario

Keysight Technologies

Keysight Technologies U1610/20A Manual de usuario

Keysight Technologies

Keysight Technologies N7015A Manual de usuario

Keysight Technologies

Keysight Technologies UXR Series Manual de usuario

Keysight Technologies

Keysight Technologies i3070 Series 5i Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 2000 Manual de usuario

Keysight Technologies

Keysight Technologies N2840A Manual de usuario

Keysight Technologies

Keysight Technologies N4000A SNS Series Manual de servicio

Keysight Technologies

Keysight Technologies E6640A EXM Manual de instalación y operación

Keysight Technologies

Keysight Technologies 11644A Series Manual

Keysight Technologies

Keysight Technologies IOT8700 Series Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario