Keysight Technologies N108 A-Series Manual de usuario
Keysight N108xA-Series IEEE
802.3 Ethernet KR/CR
Compliance and Debug
Application
Getting Started
Notices
© Keysight Technologies 2014 - 2019
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Keysight
Technologies as governed by United States
and international copyright laws.
Software Version
Version 03.02.0000 or greater
Edition
March 2019
Available in electronic format only
Keysight Technologies
1900 Garden of the Gods Road
Colorado Springs, CO 80907 USA
Warranty
THE MATERIAL CONTAINED IN THIS
DOCUMENT IS PROVIDED "AS IS," AND IS
SUBJECT TO BEING CHANGED, WITHOUT
NOTICE, IN FUTURE EDITIONS. FURTHER,
TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, KEYSIGHT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR
IMPLIED WITH REGARD TO THIS MANUAL
AND ANY INFORMATION CONTAINED
HEREIN, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. KEYSIGHT SHALL
NOT BE LIABLE FOR ERRORS OR FOR
INCIDENTAL OR CONSEQUENTIAL
DAMAGES IN CONNECTION WITH THE
FURNISHING, USE, OR PERFORMANCE OF
THIS DOCUMENT OR ANY INFORMATION
CONTAINED HEREIN. SHOULD KEYSIGHT
AND THE USER HAVE A SEPARATE WRITTEN
AGREEMENT WITH WARRANTY TERMS
COVERING THE MATERIAL IN THIS
DOCUMENT THAT CONFLICT WITH THESE
TERMS, THE WARRANTY TERMS IN THE
SEPARATE AGREEMENT WILL CONTROL.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
U.S. Government Rights
The Software is "commercial computer soft-
ware," as defined by Federal Acquisition
Regulation ("FAR") 2.101. Pursuant to FAR
12.212 and 27.405-3 and Department of
Defense FAR Supplement ("DFARS")
227.7202, the U.S. government acquires
commercial computer software under the
same terms by which the software is cus-
tomarily provided to the public. Accordingly,
Keysight provides the Software to U.S. gov-
ernment customers under its standard com-
mercial license, which is embodied in its
End User License Agreement (EULA), a copy
of which can be found at http://www.key-
sight.com/find/sweula. The license set forth
in the EULA represents the exclusive author-
ity by which the U.S. government may use,
modify, distribute, or disclose the Software.
The EULA and the license set forth therein,
does not require or permit, among other
things, that Keysight: (1) Furnish technical
information related to commercial computer
software or commercial computer software
documentation that is not customarily pro-
vided to the public; or (2) Relinquish to, or
otherwise provide, the government rights in
excess of these rights customarily provided
to the public to use, modify, reproduce,
release, perform, display, or disclose com-
mercial computer software or commercial
computer software documentation. No addi-
tional government requirements beyond
those set forth in the EULA shall apply,
except to the extent that those terms, rights,
or licenses are explicitly required from all
providers of commercial computer software
pursuant to the FAR and the DFARS and are
set forth specifically in writing elsewhere in
the EULA. Keysight shall be under no obliga-
tion to update, revise or otherwise modify
the Software. With respect to any technical
data as defined by FAR 2.101, pursuant to
FAR 12.211 and 27.404.2 and DFARS
227.7102, the U.S. government acquires no
greater than Limited Rights as defined in
FAR 27.401 or DFAR 227.7103-5 (c), as
applicable in any technical data.
Safety Notices
CAUTION
A CAUTION notice denotes a hazard. It
calls attention to an operating proce-
dure, practice, or the like that, if not
correctly performed or adhered to,
could result in damage to the product
or loss of important data. Do not pro-
ceed beyond a CAUTION notice until
the indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a hazard.
It calls attention to an operating pro-
cedure, practice, or the like that, if not
correctly performed or adhered to,
could result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indicated
conditions are fully understood and
met.
IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started 3
Contents
Contents
1 Introduction
Installing the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application 5
Recommended Equipment 6
Installing N108xA and N1010A FlexDCA on a PC 8
Installing N108xA on a PC without FlexDCA 11
Installing N108xA on the 86100D Oscilloscope 16
Starting the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application 19
Connecting to External Instruments 20
2 Installing N108xA and FlexDCA on a PC
Connecting the Equipment 34
Installing the I/O Library Suite 34
Installing the N1010A FlexDCA Application 35
Installing the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application 40
Connecting N1010A FlexDCA to 86100D or N1000A 43
Connecting N1010A FlexDCA to N109X Oscilloscope and N107X 49
Starting the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application 50
Connecting to the Network Analyzer 53
Connecting to the N4877A 54
Connecting to the Switch Matrix 55
3 Installing N108xA on a PC Without N1010A FlexDCA
Connecting the Equipment 62
Place the 86100D in Standard Configuration 63
Installing the I/O Library Suite 63
Installing the N108xA-Series IEEE 802.3 Ethernet KR/CR Compliance Test Application 64
Validating 86100D’s or N1000A’s SCPI Server Setup 67
Adding 86100D or N1000A to Keysight Connection Expert 68
Connecting N1010A FlexDCA to N109X Oscilloscope and N107X 76
Starting the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application 77
Connecting to the Network Analyzer 79
4 IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started
Contents
Connecting to the N4877A 80
Connecting to the Switch Matrix 81
4 Installing N108xA on the oscilloscope
Connecting the Equipment 87
Place the 86100D in Standard Configuration 88
Installing the I/O Library Suite 88
Installing the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application 89
Configuring FlexDCA’s SCPI Server Setup 92
Connecting N1010A FlexDCA to N109X Oscilloscope and N107X 93
Starting the N108xA-Series Compliance Test Application 94
Connecting to the Network Analyzer 96
Connecting to the N4877A 97
Connecting to the Switch Matrix 98
Keysight N108xA-Series IEEE 802.3 Ethernet KR/CR Compliance and Debug
Application
Getting Started
1Introduction
Use the instructions in this Guide to install and set up the N108xA IEEE 802.3 Ethernet KR/CR
Compliance Test Application. Once the procedures in this document are completed, you can begin
compliance testing. Information on using the application is included in the application’s Online Help.
Your licenses determine where you install the N108xA and FlexDCA applications. The N108xA license
allows you to install the application on either a specific PC or a specific N1000A or 86100D DCA-X
instrument. This selection is made at the time you redeem your licenses.
Installing the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application
1 Select from one of the three different test-equipment configurations shown in the following
pages. The configuration that you select depends on where the N108xA IEEE 802.3 Ethernet
KR/CR Compliance Test Application is installed, as determined by the licenses, and whether you
are using the N1010A FlexDCA Remote Access application.
2 After locating the figure that matches your setup, follow the recommended procedure.
Configuration DCA-X Supported Configurations DCA-M Supported Configurations
N108xA on a PC with FlexDCA A PC attached to an N1000A or 86100D
DCA-X oscilloscope (in Legacy
configuration) over LAN. The PC has
N108xA software application, N1010A
FlexDCA, N1010100A (F-AEYE) for
N1000A, and 86100DU-401 licenses, and
IO Connection Expert installed on it.
A PC directly connected to the N109X with a USB cable. The PC has N108xA software
application, N1010A FlexDCA, N109x-401 license or F-AEYE license under
N1010100A R&D package, and IO Connection Expert installed on it.
N108xA on a PC without
FlexDCA
A PC attached to N1000A or 86100D
DCA-X oscilloscope (in Standard
configuration) over LAN. The PC has
N108xA software application, N1010100A
(F-AEYE) for N1000A, and 86100DU-401
licenses, and IO Connection Expert
installed on it.
Configuration 1: Connect the primary test system PC to a low-cost modern PC via
LAN. The FlexDCA interface resides on the second PC. The second PC is then
connected to the N109x via USB. This eliminates most issues of compatibility
between an existing test system PC and the N109X hardware and can greatly simplify
converting an 86100D system to an N109X system.
Configuration 2: An N1000A or 86100D mainframe connected to the N109X with a
USB cable. The N1000A or 86100D has FlexDCA installed on it. The N1000A or
86100D can then be controlled via GPIB or LAN by a PC that has N108xA installed on
it.
The PC with N108xA has N109x-401 license or F-AEYE license under N1010100A
R&D package and IO Connection Expert installed on it.
N108xA on the oscilloscope N1000A or 86100D DCA-X oscilloscope in
Standard configuration. The oscilloscope
has N108xA, 86100DU-401 license or
F-AEYE license under N1010100A R&D
package, and IO Connection Expert
installed on it.
An N1000A or 86100D mainframe connected to the N109X with a USB cable. The
86100D has FlexDCA and N108xA installed on it.
1 Introduction
6 IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started
Recommended Equipment
Table 1 lists the recommended equipment. The equipment you select depends on the supported test
equipment that is available to you.
Table 1 Recommended equipment to run tests on the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application
Equipment Configuration
Single Plug-In Module Setup Multiple Module Setup
Oscilloscope N1000A DCA-X with options:
N1000A-LOJ Low jitter timebase
N1000A-PLK Pattern lock trigger hardware
F-JIT Enhanced Jitter Analysis option under N1010100A R&D package
F-EQ Equalizers option under N1010100A R&D package
Or
86100D DCA-X*with options:
86100D-ETR Extended Trigger
86100D-200 or F-JIT Enhanced Jitter Analysis
86100D-201 or F-EQ Advanced Waveform Analysis
Or any of these
N1092 C/E Optical + Two Electrical Channels
N1094A Two Electrical Channels
N1094B Four Electrical Channels
86100D Plug-In Module 86108A or 86108B with options LBW/HBW and 216/232.
Option JSA provides improved jitter measurement accuracy
(optional).
N1060A.
86112A, 54754A, 86117A, or 86118A-H01.
86107A (any option).
N1045A, N1045B, N1055A, N1046A 75/85/100 GHz.
N1060A
Clock/Data Recovery and
Demultiplexer†
N4877A-216/232 Clock Data Recovery & Demultiplexer.
N1076 A/B, N1077A, N1078A Clock Data Recovery.
Software N1081A, N1082A, N1083A, and N1084A IEEE 802.3 Compliance Application.
86100DU-401 Advanced Eye Software (for measuring jitter at PRBS31).
Keysight I/O Libraries, 16.3 or higher
Option N1010A-SIM or F-SIM InfiniiSim DCA Waveform Transformation Toolset.
Provides InfiniiSim Transform operators to FlexDCA.
Performance Network Analyzer
(PNA) or Economy Network Analyzer
(ENA)
Any 4-port model with frequency range of at least 19 GHz
(ENA also covers the 1 MHz termination mismatch test)
The network analyzer is used to perform return-loss measurements.
Switching Test Set (optional) Keysight U3020A S26 DC to 26.5 GHz, or BitifEye BIT 2100
Matched Cable Set 86108B- CA2 or 86108B-CA3 (quantity 1)
Phase Trimmers 86108B-PT2 or 86108B-PT3 (quantity 2)
DC Blocks 86108B-DC3, N9398C, N9399C, or 11742A (quantity 2)
Pick-Off N/A N4915A-015 (quantity 2)
Test Adapters (optional) Visit http://shop.wilder-tech.com/category_s/42.htm
* FlexDCA version A.02.00 or greater
† If you have access to the clock for the device, you can connect the clock to the 86100D’s Trigger input instead of
using the clock recovery
IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started 7
Introduction 1
Table 2 Available Clauses Versus Installed License
NOTE
The N108xA application cannot be installed on an 86100A, 86100B, or 86100C.
IEEE 802.3
Designation
Installed License
N1081A N1082A N1083A N1084A
10GBASE-KR √
40GBASE-KR4 √
40GBASE-CR4 √
100GBASE-CR10 √
100GBASE-KR4 √
100GBASE-CR4 √
XLAUI √
CAUI √
XLPPI √
CPPI √
1 Introduction
8 IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started
Installing N108xA and N1010A FlexDCA on a PC
If your licenses allow for installing the software as marked by the red star in the following
diagrams, go to Chapter 2, “Installing N108xA and FlexDCA on a PC”.
Figure 1 N108xA and N1010A FlexDCA installed on PC connected to 86100D DCA-X Oscilloscope
IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started 9
Introduction 1
Figure 2 N108xA and N1010A FlexDCA installed on PC connected to N1000A DCA-X Oscilloscope
1 Introduction
10 IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started
Figure 3 N108xA and N1010A FlexDCA Installed on PC connected to N1094B DCA-M Oscilloscope
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Equipo de prueba de Keysight Technologies
Keysight Technologies
Keysight Technologies U1818A Manual de servicio
Keysight Technologies
Keysight Technologies InfiniiVision M9241A Manual de usuario
Keysight Technologies
Keysight Technologies U1610/20A Manual de usuario
Keysight Technologies
Keysight Technologies S8780A Manual de usuario
Keysight Technologies
Keysight Technologies U2802A Manual de usuario
Keysight Technologies
Keysight Technologies InfiniVision 6000L Series Manual de usuario
Keysight Technologies
Keysight Technologies InfiniiVision 3000G X Series Manual de usuario
Keysight Technologies
Keysight Technologies 16380V Manual de operación
Keysight Technologies
Keysight Technologies U3042AE08 Manual
Keysight Technologies
Keysight Technologies Z5623A Option H01 Manual de usuario
Keysight Technologies
Keysight Technologies 85059A Manual de servicio
Keysight Technologies
Keysight Technologies N5280A Manual
Keysight Technologies
Keysight Technologies N2142A Manual de usuario
Keysight Technologies
Keysight Technologies D9020DDRC Manual de usuario
Keysight Technologies
Keysight Technologies M8000 Series Manual de usuario
Keysight Technologies
Keysight Technologies N2830A Series Manual de usuario
Keysight Technologies
Keysight Technologies U9361C Manual de usuario
Keysight Technologies
Keysight Technologies 11644A Series Manual
Keysight Technologies
Keysight Technologies 85059V Manual de servicio
Keysight Technologies
Keysight Technologies 16192A Manual de operación
Keysight Technologies
Keysight Technologies i7090 Instrucciones de funcionamiento
Keysight Technologies
Keysight Technologies E6640A EXM Manual de instalación y operación
Keysight Technologies
Keysight Technologies DP001 A Series Manual de usuario
Keysight Technologies
Keysight Technologies 16034E Manual de operación
Manuales populares de Equipo de prueba de otras marcas
SMART
SMART KANAAD SBT XTREME 3G Series Manual de usuario
Agilent Technologies
Agilent Technologies BERT Serial Manual de usuario
Agilent Technologies
Agilent Technologies N3280A Manual de usuario
Vernier
Vernier Go Direct Voltage Manual de usuario
Lifeloc
Lifeloc R.A.D.A.R. Manual de usuario
Fluke
Fluke T5-600 Instrucciones de funcionamiento e instalación
