Keysight Technologies M9216A Guía del usuario

Keysight M9216A

PXI High Voltage Data

Acquisition

Startup

Guide

M9216A Startup Guide I

II M9216A Startup Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies as governed by United States

and international copyright laws.

Manual Part Number

M9216-90001

Edition

Edition 2, November 2014

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Sales and Technical Support

To contact Keysight for sales and technical

support, refer to the "support" links on the

following Keysight web resources:

•www.keysight.com/find/M9186A

(product-specific information and

support, software and documentation

updates)

•www.keysight.com/find/assist

(worldwide contact information for

repair and service)

Information on preventing damage to your

Keysight equipment can be found at

www.keysight.com/find/tips.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Keysight disclaims all warran-

ties, either express or implied, with

regard to this manual and any infor-

mation contained herein, including

but not limited to the implied warran-

ties of merchantability and fitness for

a particular purpose. Keysight shall

not be liable for errors or for inciden-

tal or consequential damages in con-

nection with the furnishing, use, or

performance of this document or of

any information contained herein.

Should Keysight and the user have a

separate written agreement with

warranty terms covering the material

in this document that conflict with

these terms, the warranty terms in the

separate agreement shall control.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or subcon-

tract, Software is delivered and licensed as

“Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer soft-

ware” as defined in FAR 52.227-19 (June

1987) or any equivalent agency regulation or

contract clause. Use, duplication or disclo-

sure of Software is subject to Keysight

Technologies’ standard commercial license

terms, and non-DOD Departments and

Agencies of the U.S. Government will

receive no greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2) (June

1987). U.S. Government users will receive

no greater than Limited Rights as defined in

FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

The following safety precautions should be

observed before using this product and any

associated instrumentation.

This product is intended for use by qualified

personnel who recognize shock hazards and

are familiar with the safety precautions

required to avoid possible injury. Read and

follow all installation, operation, and main-

tenance information carefully before using

the product. Refer to the user documenta-

tion for complete product specifications.

M9216A Startup Guide III

WARNING

If this product is not used as spec-

ified, the protection provided by

the equipment could be impaired.

This product must be used in a

normal condition (in which all

means for protection are intact)

only.

The types of product users are:

• Responsible body is the individual or

group responsible for the use and main-

tenance of equipment, for ensuring that

the equipment is operated within its

specifications and operating limits, and

for ensuring that operators are ade-

quately trained.

• Operators use the product for its

intended function. They must be trained

in electrical safety procedures and

proper use of the instrument. They must

be protected from electric shock and

contact with hazardous live circuits.

• Maintenance personnel perform rou-

tine procedures on the product to keep

it operating properly (for example, set-

ting the line voltage or replacing con-

sumable materials). Maintenance

procedures are described in the user

documentation. The procedures explic-

itly state if the operator may perform

them. Otherwise, they should be per-

formed only by service personnel.

• Service personnel are trained to work

on live circuits, perform safe installa-

tions, and repair products. Only properly

trained service personnel may perform

installation and service procedures.

Exercise extreme caution when a shock

hazard is present. Lethal voltage may be

present on cable connector jacks or test fix-

tures. The American National Standards

Institute (ANSI) states that a shock hazard

exists when voltage levels greater than 30V

RMS, 42.4V peak, or 60VDC are present.

A good safety practice is to expect that haz-

ardous voltage is present in any unknown

circuit before measuring.

Operators of this product must be protected

from electric shock at all times. The respon-

sible body must ensure that operators are

prevented access and/or insulated from

every connection point. In some cases, con-

nections must be exposed to potential

human contact. Product operators in these

circumstances must be trained to protect

themselves from the risk of electric shock.

Before operating an instrument, ensure that

the line cord is connected to a prop-

erly-grounded power receptacle. Inspect the

connecting cables, test leads, and jumpers

for possible wear, cracks, or breaks before

each use.

When installing equipment where access to

the main power cord is restricted, such as

rack mounting, a separate main input power

disconnect device must be provided in

closed proximity to the equipment and

within easy reach of the operator.

For maximum safety, do not touch the prod-

uct, test cables, or any other instruments

while power is applied to the circuit under

test. ALWAYS remove power from the entire

test system and discharge any capacitors

before: connecting or disconnecting cables

or jumpers, installing or removing switching

cards, or making internal changes, such as

installing or removing jumpers.

Do not touch any object that could provide a

current path to the common side of the cir-

cuit under test or power line (earth) ground.

Always make measurements with dry hands

while standing on a dry, insulated surface

capable of withstanding the voltage being

measured.

The instrument and accessories must be

used in accordance with its specifications

and operating instructions, or the safety of

the equipment may be impaired.

CAUTION

• Do not exceed the maximum signal

levels of the instruments and

accessories, as defined in the

specifications and operating

information, and as shown on the

instrument or test fixture panels, or

switching card.

• Chassis connections must only be

used as shield connections for

measuring circuits, NOT as safety

earth ground connections.

• If you are using a test fixture, keep

the lid closed while power is

applied to the device under test.

Safe operation requires the use of a

lid interlock.

• Instrumentation and accessories

shall not be connected to humans.

To maintain protection from electric shock

and fire, replacement components in mains

circuits - including the power transformer,

test leads, and input jacks - must be pur-

chased from Keysight. Standard fuses with

applicable national safety approvals may be

used if the rating and type are the same.

Other components that are not

safety-related may be purchased from other

suppliers as long as they are equivalent to

the original component (note that selected

parts should be purchased only through

Keysight to maintain accuracy and function-

ality of the product). If you are unsure about

the applicability of a replacement compo-

nent, call a Keysight office for information.

WARNING

No operator serviceable parts

inside. Refer servicing to qualified

personnel. To prevent electrical

shock do not remove covers.

IV M9216A Startup Guide

Front and Rear Panels Symbols

The CE mark is a registered trade-

mark of the European Community.

The C-Tick mark is a registered

trademark of the Australian Spec-

trum Management Agency.

This symbol indicates

product compliance with

the Canadian Interfer-

ence-Causing Equipment Standard

(ICES-001). It also identifies the product is

an Industrial Scientific and Medical Group 1

Class A product (CISPR 11, Clause 4).

The CSA mark is a registered

trademark of the CSA Interna-

tional.

This symbol indicates separate

collection for electrical and elec-

tronic equipment, mandated

under EU law as of August 13,

2005. All electric and electronic equipment

are required to be separated from normal

waste for disposal (Reference WEEE Direc-

tive, 2002/96/EC).

This symbol indicates the time

period during which no hazardous

or toxic substance elements are

expected to leak or deteriorate during nor-

mal use. Forty years is the expected useful

life of the product.

Cleaning Precautions

WARNING

To prevent electrical shock, dis-

connect the Keysight Technolo-

gies instrument from mains before

cleaning. Use a dry cloth or one

slightly dampened with water to

clean the external case parts. Do

not attempt to clean internally. To

clean the connectors, use alcohol

in a well-ventilated area. Allow

all residual alcohol moisture to

evaporate, and the fumes to dissi-

pate prior to energizing the instru-

ment.

M9216A Startup Guide V

Contents

Introduction 1

Related documentation

A softcopy of this Startup Guide, and the documentation

listed below, can be found on the CD- ROM that is shipped

with this product.

You can also download them for free through our website at

http://www.keysight.com/find/M9216A.

Check the manual revision on the first page of each manual.

•StartupGuide. This manual. Printed copy for outdoor

use, included with shipment.

• Keysight M9216A PXI High Voltage Data Acquisition

Device Drivers and Help. Available for IVI- C and

IVI- COM, and LabVIEW G drivers.

• Keysight M9216A PXI High Voltage Data Acquisition

Soft Front Panel Software and Help.

• Keysight M9216A PXI High Voltage Data Acquisition

Data Sheet.

2M9216A Startup Guide

Keysight M9216A PXI High Voltage Data Acquisition

Step 1: Unpack and Inspect the Module

ESD precaution

Electrostatic discharge (ESD) can damage or destroy

electronic components. All work on electronic assemblies

should be performed at a static- safe work station. The

following figure shows an example of a static- safe work

station using two types of ESD protection.

Figure 1 Static-safe work station example

CAUTION

The M9216A is shipped in materials which prevent damage from static.

The module should only be removed from the packaging in an

anti-static area after ensuring that correct anti-static precautions are

taken. Store all modules in anti-static envelopes when not in use.

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight Technologies

Keysight Technologies

Keysight Technologies PNA-X N5249A Manual de usuario

Keysight Technologies

Keysight Technologies N9010B Manual de instalación y operación

Keysight Technologies

Keysight Technologies N5252A Manual de usuario

Keysight Technologies

Keysight Technologies N8262A P Series Manual de usuario

Keysight Technologies

Keysight Technologies N437 Series Instrucciones de instalación y funcionamiento

Keysight Technologies

Keysight Technologies E5260 Series Instrucciones de funcionamiento

Keysight Technologies

Keysight Technologies MXA N9020A-508 Manual de usuario

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies N5221/2A Series Manual de usuario

Keysight Technologies

Keysight Technologies B2900 Series Manual de usuario

Keysight Technologies

Keysight Technologies N9010A Series Manual de instalación y operación

Keysight Technologies

Keysight Technologies 8970B Manual de usuario

Keysight Technologies

Keysight Technologies 86120D Manual de usuario

Keysight Technologies

Keysight Technologies N9041B Manual de instalación y operación

Keysight Technologies

Keysight Technologies M9393A Guía del usuario

Keysight Technologies

Keysight Technologies N9340B Manual de usuario

Keysight Technologies

Keysight Technologies ENA Series Manual de usuario

Keysight Technologies

Keysight Technologies N9321C Manual de usuario

Keysight Technologies

Keysight Technologies U8903B Manual de usuario

Keysight Technologies

Keysight Technologies N9320A RF Manual de usuario

Keysight Technologies

Keysight Technologies E4980A Manual del operador

Keysight Technologies

Keysight Technologies InfiniiMax III Series Manual de usuario

Keysight Technologies

Keysight Technologies UXA Manual de instalación y operación

Keysight Technologies

Keysight Technologies E4980A Guía de inicio rápido

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario